Home / Product / Degreaser-10 / Degreaser VISCOUS VPCL
Alkaline Degreaser for Surface Preparation
This powerful Viscous liquid blended with concentrate SURFACTANT based cleaner degreaser designed to remove temporary coatings from metal and painted surfaces as well as wax, dirt, oils, greases and other cosmoline-like products.. Formulated with several different ingredients including a dual surfactant system.
Application:
Due to its high Viscousity nature that will cling to ceilings and vertical surfaces in a ready-to-use formulation. Effectively Removing coatings, non-silicone based waxes, greases, and other heavily soiled equipment.
Can be used effectively at low concentrations.
Provides corrosion protection after parts have been cleaned
Protects metal in solution and above the liquid line on carbon steel
Dual Power contains superior grease and soil penetrating qualities that allow this degreaser / cleaner to be used in many ways. Also Provides multimetal corrosion protection for 24-48 hours. This formula works on tough jobs that require extra strength.
Dose:
Make proper required solution of RXSOL-10-1756-025 and Spray on entire surface area. In some specifice condition RXSOL-10-1756-025 can be applied concentrated form also. It is best applied by spraying or immersion. The most ideal dilution, where one would get an adequate coverage of wet film for vertical and under-hanging surfaces, is 40% water to 60% concentrate. RXSOL-10-1756-025 can be sprayed with an airless or pump type sprayer, or used in a dip tank.
After spraying application wait for 10-15 minutes, depending on the film thickness of the product to be removed and the length of time that the coating has cured. If necessory repeat the spraying process.
Finally use high pressure machine if required otherwise flush with simple nozzle or JUG and Bucket application.
Sometime If coating removed is tacky or remains tacky in patches repeat same above step.
DIRECTIONS FOR USE:
Light Cleaning | 5 to 100 parts water |
Medium cleaning | 10 to 100 parts water |
Heavy Cleaning | 20 to 100 parts water |
Coating Remover | 60 to 100 parts water |
Greasy Surface | 1 to 8 parts water |
Oil Stained Uncoated Concrete Floors | 1 to 5 parts water |
The above directions are flexible rather than specific. In many cases a more diluted solution can be used, while for extreme conditions a less diluted solution may be used.
Note:
CLEANS: EQUIPMENT, FLOORS
VERSATILE: Works great for hand operations, automatic scrubbers or pressure washers. No harmful vapors or toxic solvents, Works well in hot, cold, hard or soft water. Non-flammable, Non-corrosive, Biodegradable
NON-EXPLOSIVE
SELF-EMULSIFYING WATER SOLUBLE
CONTAINS NON-IONIC SURFACE ACTIVE AGENTS AND HYDROCARBON SOLVENTS,
Alkaline AND NON-CORROSIVE,
CAN BE APPLIED BY BRUSH, SWABOR SPRAY AND THEN FLUSHED WITH WATER, FORMS STABLE CLEANING EMULSIONS,
CLEAR LIQUID AT 25 DEG C
MSDS | <p> |
---|---|
Technical Bulletin |
WhatsApp us