Mono Ethylene Glycol (MEG) is a clear, water-soluble, high-boiling liquid primarily used in polyester production and antifreeze formulations.
MONO ETHYLENE GLYCOL MEG Mono Ethylene Glycol supplier and exporter. MEG is an odorless, colorless, sweet-tasting, viscous and hygroscopic liquid, primarily used as a raw material for polyester fibers/PET plastics and as an industrial antifreeze or coolant.
Mono Ethylene Glycol (MEG) is a hygroscopic, water-miscible organic compound with a high boiling point and low vapor pressure. Approximately 70–80% of global MEG production is utilized in the manufacture of polyester resins and fibers.
Polyester fiber and PET resin production (70–80% usage)
Antifreeze and coolant formulations
Heat transfer fluids
Dehydration of natural gas
Solvent in various industrial applications
Chemical Name: Mono Ethylene Glycol
Chemical Formula: C₂H₆O₂
Molecular Weight: 62.07 g/mol
CAS Number: 107-21-1
Description: Monoethylene Glycol
|
Test Description |
Specification |
||
|
Monoethylene Glycol |
99.5 %(w/w) |
||
|
Water |
0.05 %(w/w) |
||
|
Acidity (as acetic acid) |
0.001 %(w/w) |
||
|
Iron |
0.1 ppm |
||
|
DEG |
05 %(w/w) |
||
|
Aldehyde (as acetaldehyde Chloride) |
10 ppm |
||
|
Ash |
0.001 %(w/w) |
||
|
pH at 20oC |
6.5 to 7.5 |
||
|
Appearance |
Clear Visual |
||
|
Specific Gravity 20/20oC |
1.1153 to 1.1156 |
||
|
UV Tansmittance wavelength % |
|||
|
220 |
70 nm |
||
|
275 |
90 nm |
||
|
350 |
98 nm |
||
|
ppm |
|
ppm |
Store in tightly closed containers in a dry, well-ventilated area
Avoid moisture contamination
Keep away from strong oxidizing agents
Use appropriate PPE during handling
Available in:
230 kg drums
IBC tanks
Bulk tanker loads
Mono Ethylene Glycol MEG supplier in UAE Middle East Oman and India. We are MEG supplier and exporter in Fujairah Dubai, Sharjah, Ajman, UAE, Muscat, Barka, Sohar, Oman, Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Sudan, Yemen, Nairobi, Kenya
| Product Name | RXSOL-19-1210-0230 |
| Product Type | Mono Ethylene Glycol / Ethylene Glycol |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah - UAE, Bakra - Oman
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
CAS Number |
EC Number |
Index Number |
|
Ethanediol |
107-21-1 |
203-473-3 |
603-027-00-1 |
Hazard description:
Information concerning particular hazards for human and environment: R 22 Harmful if swallowed.
|
General information |
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. |
|
After inhalation |
Supply fresh air; consult doctor in case of complaints. |
|
After skin contact |
Generally the product does not irritate the skin. |
|
After eye contact |
Rinse opened eye for several minutes under running water. |
|
After swallowing |
Call for a doctor immediately. |
| Suitable extinguishing agents | Use fire extinguishing methods suitable to surrounding conditions. |
| Protective equipment |
No special measures required. |
Person-related safety precautions: Not required.
• Measures for environmental protection:
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
• Measures for cleaning/collecting:
Dilute with plenty of water.
Dispose contaminated material as waste according to item 13.
Handling:
Information for safe handling: No specific requirement
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Additional information about design of technical facilities: No further data; see item 7.
| Ingredients with limit values that require monitoring at the workplace: | |
| 107-21-1 ethanediol | |
|
TLV (USA) IOELV (EU) WEL (Great Britain) |
Short-term value: C 100 mg/m³ H Short-term value: 104 mg/m³, 40 ppm Long-term value: 52 mg/m³, 20 ppm Skin Short-term value: 104** mg/m³, 40** ppm Long-term value: 10* 52** mg/m³, 20** ppm Sk *particulate **vapour |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Respiratory protection: Not required.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Goggles recommended during refilling
| General Information: | |
|
Form |
Fluid |
|
Colour |
Colourless |
|
Odour |
Sweetish |
| Change in condition: | |
|
Meltingpoint/Melting range |
12.4°C |
|
Boiling point/Boiling range |
197°C |
|
Flash point |
111°C |
|
Ignition temperature |
410°C |
| Danger of explosion | Product does not present an explosion hazard. |
| Explosion limits: | |
| Lower | 3.2 Vol % |
| Upper | 53 Vol % |
| Vapour pressure at 20°C | 0.08 hPa |
| Density at 20°C | 1.11 g/cm³ |
| Solubility in / Miscibility with: | |
| water at 20°C | 1 g/l |
| Viscosity | |
| Dynamic at 20°C | 21 mPas |
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
Acute toxicity:
| LD/LC50 values relevant for classification: | ||
| Oral | LD50 | 5840 mg/kg (rat) |
| Dermal | LD50 | 9530 mg/kg (rabbit) |
| Primary irritant effect: | ||
| on the skin | No irritant effect. | |
| on the eye | No irritating effect. | |
| Sensitization | No sensitizing effects known | |
General notes:
Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Product:
Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
|
Land transport ADR/RID (cross-border) ADR/RID class: - |
|
Maritime transport IMDG: IMDG Class: - Marine pollutant: No |
|
Air transport ICAO-TI and IATA-DGR: ICAO/IATA Class: - |
Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
• Code letter and hazard designation of product:
Xn Harmful
• Risk phrases:
22 Harmful if swallowed.
• Safety phrases:
2 Keep out of the reach of children.
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
