How to use Carbon Remover effectively to Decarbonize Surface

Carbon Remover by RXSOL is the approved Decarbonizing Liquid Cleaner trusted by more than 1000+ customers. Its strong emulsifying properties enable to clean all harsh carbon deposits very easily.

For requirements of Carbon Remover in Dubai, Sharjah, Ras Al Khaimah, Fujairah, feel free to contact the largest Detergents chemicals manufacturer in the UAE. We will provide you the factory sale price for Carbon Remover in the UAE Middle East.

RXSOL Carbon Remover Decarbonizer is a high-solvency, industrial-grade carbon cleaning chemical designed to dissolve and eliminate stubborn carbonaceous deposits, burnt oil residues, grease, varnishes and other heavy contaminants from metal surfaces without hard mechanical scraping.

Carbon build-up occurs in engines, heat exchangers, valves, pistons and other components due to high-temperature combustion and prolonged operation. If not removed, these carbon deposits can reduce efficiency, impair heat transfer, and accelerate wear. Chemical decarbonization with the RXSOL formulation is an efficient method to restore clean surfaces and extend service life.

Best way to clean carbon deposits

1. Preparation & Safety

Before applying the product:

• Wear appropriate PPE: chemical-resistant gloves, eye protection and protective clothing.
• Ensure the parts are accessible and free of loose debris.
• Work in a well-ventilated area.
  Safety: Avoid direct contact with eyes and skin; rinse thoroughly with water if contact occurs.

2. Surface Pre-Inspection

Identify the level of carbon build-up:

• Light deposits: Minimal soot or thin layers.
• Heavy deposits: Thick, baked-on carbon, coked residues or varnish.
• Heavier build-ups require longer exposure or higher concentration solutions.

3. Dilution & Application Method

Dilution Options:

• Concentrated use: For very heavy carbon and tenacious deposits, use the product undiluted.
• Diluted use: Mix 1 part concentrate with 2 to 10 parts water depending on severity.

Application Techniques:

A. Immersion Bath Method (Recommended):

Prepare a steel immersion bath with the chosen concentration.

Fully submerge the parts or components in the solution.

Allow soaking for 30 minutes to 1 hour.

Very heavy deposits: May require 12–24 hours of immersion.

After soaking, remove parts and rinse thoroughly with high-pressure water to wash away loosened carbon.

B. Circulation Method (For Large Assemblies):

Set up a circulation drum where the solution can flow over surfaces (e.g., heat exchanger tubes).

Maintain circulation for 10–12 hours to fully penetrate oily carbon build-up.

Rinse system with high-pressure water until the rinse water runs clear.

Allow surfaces to air-dry.

4. Enhanced Performance Tips

• Warm Solution: Heating the solution to 30–40 °C can accelerate dissolving action and reduce cleaning time.
• Agitation: Gentle agitation or circulating flow helps penetration into hard-to-reach areas.
• Repeat Treatment: For extremely stubborn carbon, a second treatment may be needed.

5. Post-Cleaning Care

Once decarbonization is complete and rinsed:

• Inspect the surface for residual deposits.
• Dry thoroughly to prevent corrosion or flash rusting.
• Reassemble components following normal maintenance procedures.

Using the RXSOL Carbon Remover correctly through proper dilution, immersion or circulation, sufficient contact time and thorough rinsing ensures effective decarbonization of engine parts, heat exchangers and other machinery surfaces. This chemical approach minimizes manual scraping, reduces surface damage, and extends component life while improving operational performance.

The post How to use Carbon Remover effectively to Decarbonize Surface first appeared on Fujairah chemical.

PCS Hold Clean direct to Port Supply in UAE

Pet Coke Cleaning from cargo vessel hold is a difficult task which can be easily cleansed using RXSOL PCS Hold Clean. With on-board supply services over all ports in the UAE – Jebel Ali, Fujairah, Dibba, Rashid Port, etc, feel free to contact us as we are the largest manufacturer of various Tank Cleaning Hold Cleaning chemicals. Our special formulation PCS Hold Clean has comparatively higher active concentration which enables easier pet coke cleaning from holds as compared to other products in the market.

With more than 100+ ship management businesses using RXSOL Hold Cleaning chemicals, join them and be hassle free for all your marine chemicals needs.

How RXSOL PCS Hold Clean is used for Pet Coke Cargo?

A  water based heavy duty alkaline cleaner for removal of oily stains as pet coke and coal. Also contains a specialized blend of synthetic surfactants which allow for more cling time to cargo hold surfaces.

The cleaning should take place as soon as discharge is complete to maximize  effectiveness.

Also effective on dried oil films. When cleaning from black oils to white oils and from black oils to cargo grain

Barrier chemicals can sometimes be effective when applied prior to loading, but should never be used unless time allows them to dry complete.

Also check: Green Delayed Petcoke cleaning method from SHIP HOLD

We have various Tank Hold Cleaners available which make vessel functioning easy. Get in touch with us for any requirement.

The post Pet Coke Hold Clean direct Port Supply in UAE first appeared on Fujairah chemical.

Cleaning Methods for Green Delayed Petcoke

Green Petcoke, also known as Raw or Delayed Petcoke, is an unprocessed coke obtained directly from the coker. Due to its high oil content, cleaning Green Delayed Petcoke is more challenging than ordinary calcined petcoke. It often leaves stubborn, oily stains on metal surfaces that become increasingly difficult to remove over time.

To ensure proper cleaning, remove all residue immediately after discharge using a high-pressure sprayer. Unlike dry calcined petcoke, Green Petcoke requires specialized cleaning agents formulated to dissolve and emulsify oily carbon deposits effectively.

Recommended Cleaning Product
➡ Green Petcoke Remover – RXSOL-25-2204-210
A powerful cleaner designed specifically to remove green delayed petcoke residues and stubborn stains from ship cargo holds, decks, and equipment surfaces.

Recommended Practice (Before Loading)
Before loading Green Petcoke, it is strongly recommended to apply RXSOL SLIP COAT on the cargo hold surface.
This polymer-based coating acts as a protective slip barrier, preventing direct contact between petcoke and metal surfaces, thus making post-unloading cleaning much easier.

Supporting Products for Complete Hold Care
Purpose Product Name Product Code
Slip Barrier Coat HOLD BLOCK RXSOL-22-2210-210
Heavy-Duty Hold Cleaner HOLD WASH CONCENTRATE RX RXSOL-22-2204-210
Surface Protection Kit RXSOL Protective Package Includes Gloves, Goggles, coveralls, & particulate masks
Product Highlights
Safe for use on painted and coated metal surfaces

Quickly emulsifies oil, tar, and petcoke residues

Prevents corrosion and surface pitting

Suitable for marine and industrial cleaning applications

The post How to clean Green Delayed Petcoke from Ship Hold first appeared on Fujairah chemical.

DUBI CHEM MARINE INTERNATIONAL is a UAE-based chemical trading and manufacturing company, serving the Middle East with a strong reputation for reliability and quality.

We are recognized as one of the leading marine chemical and best marine chemicals manufacturers and suppliers in Dubai, UAE, providing a wide range of specialized products trusted across marine, industrial, and oilfield sectors.

Our most popular products include:

Silica Gel, Activated Carbon, Activated Alumina

Teepol, Paint Thinner, Degreasers

Demulsifier, Emulsifier, Dispersant

Oilfield Chemicals and Detergents

Boiler and Cooling Water Treatment Chemicals

RO Chemicals, Membrane Cleaners

Tank and Ship Hold Cleaning Chemicals

Ballast Water Tank Cleaning and Treatment Chemicals

Ultrasonic Cleaners, Antifoams

Carbon Removers, Paint Removers

Air Cooler Cleaners, Coolants, Glycol, IPA

Diesel Exhaust Fluid (AdBlue)

Portable Toilet Deodorizers, Waterless Hand Cleaner Cream

With decades of expertise, we focus on quality, performance, and customer satisfaction, making us the preferred partner for marine, oilfield, and industrial chemical solutions in the UAE and beyond.

The post Best Marine Chemical Supplier in Dubai UAE first appeared on Fujairah chemical.

Descaling Liquid Supplier in Dubai UAE Umm Al Quwain Sharjah Abu Dhabi Fujairah.
Other Valuable Marine Chemicals :::
CLEANING & MAINTENANCE DISCLEANING CHEMICAL 25 LTR is a water based blend of inhibited acids, surfactants and emulsifying agents for cleaning of separator discs.
PURIFIER DISC CLEANING

GAMAENZYME CLEANERS – GAMAENZYME BTC is a unique biological active liquid formulation containing specialized bacterial strains, biodegradable low foaming chemical cleaners and anti-foam agents.
TOILET CLEANING

GALLEY & ACCOMMODATION – EAZY CLEANER OVEN AND GRILL is a strong heavy duty alkaline cleaner for oven and grill cleaning in the galley area. The product is designed to penetrate and break down tough burnt-on carbon deposits.

CLEANING & MAINTENANCE – CARBON CLEANING AND OIL GREASER REMOVER is a heavy duty solvent cleaner ideal for removal of stubborn carbon deposits.

CLEANING & MAINTENANCE – DESCALING CLEANINGLIQUID is a hydrochloric acid based product containing active descaling accelerators, corrosion-inhibitors and wetting agents in a highly efficient solution.

CLEANING & MAINTENANCE – AQUABREAK is a multipurpose cleaning and degreasing agent. It is low-toxic, non-caustic, free of hydrocarbon solvents and biodegradable.

SOPEP CHEMICALS Cleaning Chemicals
CLEANING & MAINTENANCE – SEACLEAN OSD is a oil spill dispersant.

SOPEP REQUREMENT

ENVIROCLEANING is a micro emulsion water based cleaner and degreaser for general engine room and deck cleaning tasks

CLEANING & ULTRASONIC

GALLEY & ACCOMMODATION

EASYCLEANER surfactant & DISINFECTION is a highly efficient combined cleaning and disinfection product with outstanding bactericidal performance.

GALLEY CLEANING Chemicals

BOILER WATER TREATMENT – AUTOTREATMENT is a multifunctional, liquid boiler water treatment, formulated with alkaline compounds, scale inhibitor, dispersant, and volatile amines for the protection of the feed, boiler and condensate systems.

BOILER TREATMENT Water Treatment Chemicals

COOLING JACKET WATER TREATMENT – Roccor NB Nitrite Borax Based Liquid is a highly effective corrosion inhibitor for the common ferrous and non-ferrous metals found in engine cooling water systems.

WATER PRODUCTION TREATMENT – VAPOURTREATMENT is a concentrated liquid blend of polymer and antifoam agents for controlling scale and foam in evaporators.

BOILER WATER TREATMENT – CONDENSNOL AMINE is blend of liquid neutralizing amines for corrosion control in steam and condensate systems.

BOILER TREATMENT Water Treatment Chemicals

HEAVY FUEL OIL TREATMENT – FUEL POWER CONDITIONING CHEMICAL stabilizes and stops sludge formation in fuel tanks. RXSOL FUEL Conditioner also improves separation reducing the amount of sludge wasted.

SEWAGE TREATMENT CHEMICALS ::: SODIUM HYPOCHLORITE

Other Valuable Marine Chemicals available in Dubai UAE Umm Al Quwain Sharjah Abu Dhabi Fujairah

DESCALER LIQUID 555 DESCALE IT
MARICLEAN DG DREW – DEGREASER AP
AIR COOLER CLEANER ACC-9
D.C.W.T. NON CHROMATE LIQUIDEWT/MAXIGARD
OPTITREAT
BIOACTIVE TOILET CLEANER
CHLORIDE TEST KIT
CONDUCTIVITY TEST KIT
HYDRAZINE TEST KIT
NITRITE TEST
OIL & GREASE REMOVER H.D 999 OIL & GREASE REMOVER/ HDE-777
Boiler Water Treatment Test Kit
POTABLE WATER TEST KIT

Get Full Boiler Treatment Chemicals range in the UAE

The post Descaling Liquid Supplier Umm Al Quwain first appeared on Fujairah chemical.

Efficient Oil Grease Removal

Fujairah Chemical offers a high-quality Oil Grease Remover, providing a cost-effective solution for various industries. Discover why our product is the ideal choice:

• Powerful Degreasing Action: Our Oil Grease Remover is formulated with powerful agents that effectively dissolve and remove tough oil and grease stains, providing a thorough and efficient cleaning process.
• Cost-Effective Solution: By choosing our Oil Grease Remover, you benefit from a cost-effective cleaning solution. It saves time, effort, and resources, as it requires less product and effort to achieve exceptional results.
• Versatile Applications: Our product is suitable for various industries, including automotive, manufacturing, food processing, and more. It effectively tackles oil and grease stains on different surfaces and equipment.
• Environmentally Friendly: We prioritize environmental sustainability and ensure that our Oil Grease Remover is formulated to be eco-friendly, without compromising its degreasing power.

Frequently Asked Questions (FAQs)

The post High-Quality Oil Grease Remover first appeared on Fujairah chemical.

Unlocking the Power of Activated Carbon Unwashed

Fujairah Chemical offers high-quality Activated Carbon Unwashed, providing a cost-effective solution for various applications. Discover why our product is the ideal choice:

• Efficient Adsorption: Our Activated Carbon Unwashed is specifically designed to have a high adsorption capacity, making it highly effective in removing impurities, contaminants, and odors.
• Cost-Effective Solution: By choosing our Activated Carbon Unwashed, you benefit from a cost-effective solution for water purification, air filtration, and other industrial processes. It offers long-lasting performance without compromising quality.
• Wide Range of Applications: Our product is versatile and can be used in various industries, including water treatment, food and beverage, pharmaceuticals, and more. It effectively improves the quality and purity of different substances.
• Reliable and Consistent Quality: We prioritize quality and ensure that our Activated Carbon Unwashed meets stringent standards. It is produced with precision to deliver reliable and consistent results.

Frequently Asked Questions (FAQs)

The post High-Quality Activated Carbon Unwashed first appeared on Fujairah chemical.

Fujairah Chemical offers high-quality Petcoke cargo hold cleaning chemicals, providing a reliable and efficient solution for maintaining cargo holds. Here’s why our products are the top choice:

• Superior Cleaning Performance: Our Petcoke cargo hold cleaning chemicals are specifically formulated to effectively remove stubborn Petcoke residues, ensuring thorough cleaning.
• Cost-Effective Solution: By using our cleaning chemicals, you can save time, effort, and resources associated with manual cleaning methods. Our products offer a cost-effective solution for cargo hold maintenance.
• Safe and Environmentally Friendly: We prioritize safety and environmental sustainability. Our cleaning chemicals are non-toxic, biodegradable, and comply with international regulations, ensuring a safe working environment.
• Easy Application: Our cleaning chemicals are designed for easy application, facilitating efficient cleaning processes and minimizing downtime during cargo hold maintenance.

Frequently Asked Questions (FAQs)

The post Usage Of Emulsion Breaker first appeared on Fujairah chemical.