The RXSOL-17-1058-025 is the new, 3rdgeneration dispersant which is the latest water and Surface Active Agent  based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers or hoses using an injector.

This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.

The post OIL Spill Dispersant Type-II 210 Ltrs first appeared on Fujairah chemical.

It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.
 

RXSOL-17-1047-210 Emulsifier  based product with excellence  efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place .

AREA: At SEA , at shore either in port or off board , for industrial purpose.

Procedure Of  Use:-

Oil-Spills-at-Sea                                                                                                                                                                    
RXSOL-17-1047-210   is used concentrated  by  direct spraying to clean up oil spills at sea . It  can  be  applied  by hand spray, work boats with  mounted  spray booms , or  fire  hoses  with  injectors. Allow  some  time  for  the  oil to  absorb the   RXSOL-17-1012-SB   and  then  disperse  mixture   by vigorous   agitation   using   Fire   hoses ,   Ship's propeller, Breaker boards towed  behind work boats ,  etc .

Oil – On – Beaches – And – Shore – Line
RXSOL-17-1012-SB   should  be applied  neat by spraying over oiled areas. Allow time for the oil to  absorb  the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment  rate  depends on the  nature  and  thickness of  the oil spill, also on  the age and condition. Under conditions where it is  a  thin slick of oil, 1 litre of  RXSOL-17-1047-210 is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications  may be necessary. (Depends on the size of contamination in the affected area )

Oil Spill On Deck
Remove as much of the oil as possible, then spray  RXSOL-17-1047-210 over area covered by the oil  &  allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.

The post Oil Spill Dispersant Type-III 210 Ltrs first appeared on Fujairah chemical.

It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.
 

RXSOL-17-1047-020 Emulsifier  based product with excellence  efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place .

AREA: At SEA , at shore either in port or off board , for industrial purpose.

Procedure Of  Use:-

Oil-Spills-at-Sea                                                                                                                                                                    
RXSOL-17-1047-020   is used concentrated  by  direct spraying to clean up oil spills at sea . It  can  be  applied  by hand spray, work boats with  mounted  spray booms , or  fire  hoses  with  injectors. Allow  some  time  for  the  oil to  absorb the   RXSOL-17-1047-020   and  then  disperse  mixture   by vigorous   agitation   using   Fire   hoses ,   Ship's propeller, Breaker boards towed  behind work boats ,  etc .

Oil – On – Beaches – And – Shore – Line
RXSOL-17-1047-020   should  be applied  neat by spraying over oiled areas. Allow time for the oil to  absorb  the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment  rate  depends on the  nature  and  thickness of  the oil spill, also on  the age and condition. Under conditions where it is  a  thin slick of oil, 1 litre of  RXSOL-17-1047-020 is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications  may be necessary. (Depends on the size of contamination in the affected area )

Oil Spill On Deck
Remove as much of the oil as possible, then spray  RXSOL-17-1047-020 over area covered by the oil  &  allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.

The post Oil Spill Dispersant Type-III 20 Ltrs first appeared on Fujairah chemical.

RXSOL-17-1012-210 is a bio-degradable Emulsifier based product with excellent efficiency and low toxicity with superior penetration. This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place. APPLICATION :Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.

The post Oil Spill Dispersant Type-I 210 Ltrs first appeared on Fujairah chemical.

RXSOL-17-1012-020 is a bio-degradable Emulsifier based product with excellent efficiency and low toxicity with superior penetration. This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place. APPLICATION :Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.

The post Oil Spill Dispersant Type-I 20 Ltrs first appeared on Fujairah chemical.

The RXSOL-17-1058-025 is the new, 3rdgeneration dispersant which is the latest water and Surface Active Agent  based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers or hoses using an injector.

This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.

The post Oil Spill Remover 25 Ltr first appeared on Fujairah chemical.

RXSOL-17-1012-025 is a bio-degradable Emulsifier and low aromatic based product with excellent efficiency and low toxicity with superior penetration. This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place. APPLICATION :Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.

The post Oil Spill Dispersant Type-I 25 Ltrs first appeared on Fujairah chemical.

The RXSOL-17-1058-025 is the new, 3rd generation dispersant which is the latest water and Surface Active Agent  based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers

The post OIL Spill Dispersant Type-II 25 Ltrs first appeared on Fujairah chemical.

It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.
 

RXSOL-17-1012-SB Emulsifier  based product with excellence  efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place .

AREA: At SEA , at shore either in port or off board , for industrial purpose.

Procedure Of  Use:-

Oil-Spills-at-Sea                                                                                                                                                                    
RXSOL-17-1012-SB   is used concentrated  by  direct spraying to clean up oil spills at sea . It  can  be  applied  by hand spray, work boats with  mounted  spray booms , or  fire  hoses  with  injectors. Allow  some  time  for  the  oil to  absorb the   RXSOL-17-1012-SB   and  then  disperse  mixture   by vigorous   agitation   using   Fire   hoses ,   Ship's propeller, Breaker boards towed  behind work boats ,  etc .

Oil – On – Beaches – And – Shore – Line
RXSOL-17-1012-SB   should  be applied  neat by spraying over oiled areas. Allow time for the oil to  absorb  the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment  rate  depends on the  nature  and  thickness of  the oil spill, also on  the age and condition. Under conditions where it is  a  thin slick of oil, 1 litre of  RXSOL-17-1012-SB is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications  may be necessary. (Depends on the size of contamination in the affected area )

Oil Spill On Deck
Remove as much of the oil as possible, then spray  RXSOL-17-1012-SB over area covered by the oil  &  allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.

The post Oil Spill Dispersant Type-III 25 Ltrs first appeared on Fujairah chemical.