Name: Scale Inhibitor 170
Brand: Fujairah Chemical
Availability: InStock

Part No: RXSOL-81-8193-210

Treatment is used to Reduce the concentration of scale forming compounds

Category

Drilling Fluids & Mud Oil Field chemicals

Liquid industrial synthetics Use to prevent scaling formation. This blend of scale and corrosion inhibitors to control systems formation of scale and corrosion.

Application

Scale Inhibitor 170 is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale. It is an adsorption-type scale inhibitor consisting of polymers of novel phosphonate monomers. Phosphorous-containing functional groups have been incorporated in to a polymeric scale inhibitor. Additional phosphonate groups not only increase the scale control activity but also enhance adsorption of the scale inhibitor onto rocks and provide analytical means for determining scale inhibitor concentration.Scale Inhibitor 170 has high calcium ion tolerance in a wide pH ranges and temperature as high as 120℃

Scale Inhibitor 170 can be used as scale and corrosion inhibitor for oilfield water, industrial circulating water. Scale Inhibitor 170 inhibitor was specifically developed for use in matrix treatments when treating carbonate reservoirs. Pumping scale inhibitor during acidizing of carbonate reservoirs eliminates the need for a separate inhibitor squeeze treatment.

Scale Inhibitor 170 also be used for continuous injection and squeeze applications, depending on the composition of the produced water. For continuous injection, typical treating rates vary between 10 ug/g and 50 ug/g. In squeeze treatments, the inhibitor is mixed in a water-base fluid at concentrations between 5% and 30%.

Dose

Scale is the precipitate that forms on surfaces in contact with water as a result of the precipitation of normally soluble solids that become insoluble as temperature increases. The chemical treatment of water associated with oil and gas includes the application of scale inhibitors, such as phosphonates, to help maintain the integrity of equipment that is used during the drilling and production phases. Treatment is used to Reduce the concentration of scale forming compounds that can accumulate in production wells, water and disposal wells, flowlines and surface equipment. The accumulation of scale can reduce flowrates or for instance, lower efficiencies in heat exchangers. Scale inhibiting chemicals can be applied up or downhole of the wellhead and are in general, classified into four categories: Oil-Miscible, Totally Water Free, Emulsified and Solid. Depending on the mineral content present in the water, duration of the project and operation needs, the chemicals can be applied continuously or in scale squeeze applications.

Technical specifications

Physical Properties :

Appearance	: Liquid
Colour	: Dark Brown
Odour	: Amine
pH Value (Conc)	: 3.4-5.4 Viscosity 1-20 Cst @ 100f
Relative Density	: 1.01-1.21 @ 60f
Solubility	: Soluble In Water

Packing sizes

210 Ltrs

Supply location

Scale Inhibitor available in ready stock in Mumbai, Kandla, Mundra, Kolkata, Howrah, Vishakhapatnam, Chennai, Tuticorin, India. Ready stock of Scale Inhibitor available in Fujairah, Dubai, Sharjah, Ras Al Khaimah, Abu Dhabi, UAE, Muscat, Barka, Oman. Scale Inhibitor chemical liquid available in Nairobi, Mombasa, Kenya, Uganada, Canada BC, Yemen, Sudan

Note

Feature & Benefit

Compatible with acids
Effective in inhibiting barium, strontium, calcium sulfate, and calcium carbonate scales
Easily mixed into fluids
Tolerant to seawater injection

Request a quote

Pricing and availability for Scale Inhibitor 170 are provided on request. Send us your requirement and packing size and our team will get back to you.

Part No: RXSOL-81-8193-210

Enquire about this product ← Back to all products

Safety data (MSDS)

Product Name	Scale Inhibitor 170
Part Number	RXSOL-81-8193-210

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	+91 22 65113333 / 5555 / 9999
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	123@rxmarine.com
Website	www.rxmarine.com

Component	CAS-No	Weight %	R Phrases
BHMTP (Methylene phosphonic Acid)	34690-00 -1	10- 30	R 34
Ammonium Chloride	235-186-4	1-10	R 22

Corrsive

Classification	:	Skin corrosion/irritation
Label Elements	:	Corrosive : Causes severe skin burns and eye damage.
Precautionary Statements	:	Avoid release to the environment.Wear protective gloves/ protective clothing/ eye protection/ face protection.

Inhalation	:	Remove to fresh air, treat symptomatically. Get medical attention.
Skin Contact	:	Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Obtain medical attention. Take off contaminated clothing and shoes immediately.
Eye Contact	:	Immediate medical attention is required. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Ingestion	:	Seek medical advice immediately, showing the label and/or MSDS. If conscious, washout mouth and give water to drink. If unconsious, do not give anything by mouth, place in the recovery position, check breathing and pulse. If necessary give artifical respiration. Do not induce vomiting without medical advice.
Important symptoms	:	Causes severe skin burns and eye damage.

Suitable Extinguishing Media	:	Use fire-extinguishing media appropriate for surrounding materials. Water spray. Foam. Carbon dioxide (CO2). Dry chemicals, sand,dolomite etc.
Special Fire Fighting Procedure	:	Avoid breathing fire vapours. Keep up-wind to avoid fumes. Cool containers exposed to flames with water until well after the fire is out. Keep run-off water out of sewers and water sources. Dike for water control.
Special Hazaqrd during fire	:	May develop highly toxic or corrosive fumes if heated. Fire or high temperatures create: Oxides of: Carbon. Nitrogen. Phosphorus.
Method	:	Wear full protective clothing. Use air-supplied respirator during fire fighting.

Personal Precautions	:	Wear protective clothing as described in Section 8 of this safety data sheet. In case of inadequate ventilation, use respiratory protection. Avoid inhalation of vapours and contact with skin and eyes.
Environmental Precautions	:	In the event of a spill, prevent material from entering sewers or waterways. Do not allow material to contaminate ground water system. Prevent product from entering drains. If drains, streams, soil or sewers become contaminated, notify local authority. Do not contaminate surface water.
Methods for Containment and Clean Up	:	Small Spill : Soak up spill with absorbent material. Place residues in a suitable, covered, properly labeled container. Wash affected area. Large Spill : Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Containers with collected spillage must be properly labelled with correct contents and hazard symbol. Do not let washing down water contaminate ponds or waterways.

Handling : Do not get in eyes, on skin, on clothing. Use with adequate ventilation. Do not breathe vapors/gases/dust. Keep the containers closed when not in use. Ensure all containers are labeled. Have emergency equipment (for fires, spills, leaks, etc.) readily available. Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection)

Storage : Store in suitable labeled containers. Store the containers tightly closed. Containers require venting bungs to avoid over pressure. Keep in dry place. Store in a cool well ventilated area away from direct sunlight.

Exposure Guidelines : Exposure guidelines have not been established for this product.

Engineering Measures	:	General ventilation is recommended. The use of local exhaust ventilation is recommended to control emissions near the source. Laboratory samples should be handled in a fumehood. Provide mechanical ventilation of confined spaces.Use approved safety goggles or face shield.
Skin and body protection	:	When handling this product, the use of chemical gauntlets is recommended. The choice of work glove depends on work conditions and what chemicals are handled.
Hygiene Measures	:	DO NOT SMOKE IN WORK AREA! Wash hands at the end of each work shift and before eating, smoking and using the toilet. Wash promptly if skin becomes wet or contaminated. Promptly remove any clothing that becomes contaminated. Use appropriate skin cream to prevent drying of skin. When using do not eat, drink or smoke.

Respiratory Protection : Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

gloves suit

Gloves Suit

Physical State	:	Liquid
Appearance	:	Clear Dark Brown
Odor	:	Amine
Odor Threshold	:	No information available.
PH	:	3.4 - 5.4
Melting Point/Range	:	No information available.
Boiling Point/Range	:	100 °C
Flash Point	:	No information available.
Evaporation Rate	:	No information available.
Flammability (solid,gas)	:	No information available.
Flammability or explosive limits Upper	:	No data available
Flammability or explosive limits Lower	:	No data available
Lower Explosion Limit	:	No data available.
Vapor Pressure	:	No data available.
Vapor Density		No data available.
Relative Density	:	1.01 - 1.21 @ 20 °C
Solubility in Water	:	Complete Soluble.
Partition coefficient; n-octanol/water	:	No data available
Decomposition temperature	:	No information available.
Viscosity	:	1-20 cst @ 20 °C
Explosive Properties	:	Not applicable
Oxidizing Properties	:	Not applicable

Stability	:	Stable under normal conditions.
Conditions to Avoid	:	Avoid excessive heat for prolonged periods of time..
Hazardous Decomposition Products	:	Oxides of: Carbon. Nitrogen. Phosphorus
Hazardous Polymerization	:	Will Not Polymerise.
Hazardous Reaction	:	No data available.

Skin corrosion/irritation		Causes severe skin burns and eye damage.
Serious eye damage/eye irritation		Causes severe skin burns and eye damage.
Inhalation		May cause irritation to the respiratory system.
Ingestion		Corrosive. Even small amounts may cause serious damage. Swallowing concentrated chemical may cause severe internal injury. May cause chemical burns in mouth, oesophagus and stomach.
STOT - repeated exposure		Based on available data, the classification criteria are not met.
Aspiration toxicity		Based on available data, the classification criteria are not met.

Toxicity	:	No toxicity studies have been conducted on this product.
Chronic aquatic toxicity	:	Not expected to demonstrate chronic toxicity to aquatic organisms
Ecotoxicity		The product may affect the acidity (pH-factor) in water with risk of harmful effects to aquatic organisms.
Mobility	:	No information available

Waste Disposal Methods : Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Chemical waste generators must also consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification

Land Transport :

Proper Shipping Name	:	Corrosive Liquid Organic NOS, BHMTP
UN Number		UN3265
Transport hazard class(es)	:	8
Transport hazard class(es)	:	III
Special precautions for user	:	Not applicable

Air Transport (ICAO/ IATA)

Proper Shipping Name	:	Corrosive Liquid Organic NOS, BHMTP
UN Number		UN 3265
Transport hazard class(es)	:	8
Transport hazard class(es)	:	III
Special precautions for user	:	Not applicable

Marine Transport (IMDG/IMO)

Proper Shipping Name		Corrosive Liquid Organic NOS, BHMTP
UN Number		UN 3265
Transport hazard class(es)		8
Transport hazard class(es)		III
Special precautions for user		Not applicable

Safety, health and environmental regulations/legislation specific for the substance or mixture:

CONTAINS BHMTP (METHYLENEPHOSPHONIC ACID)
RISK PHRASES

R34      :Causes burns.

SAFETY PHRASES
S24/25      : Avoid contact with skin and eyes.
S26          : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.
S45           : In case of accident or if you feel unwell, seek medical advice immediately (show label where possible).
S60          : This material and its container must be disposed of as hazardous waste.

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Rx Marine International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.