Aromatic hydrocarbon solvent cleaner is ideal for heavy duty online and offline gas turbine compressor cleaning.
Compressor cleaning chemical, is developed to deliver maximum cleaning performance, Gas Turbine Wash F1 has become a trusted solution for restoring compressor efficiency and maintaining gas turbine performance under demanding operating conditions.
Gas Turbine Wash F1 is a high-purity blend of hydrocarbon solvents and advanced surfactants engineered for intensive cleaning of gas turbine compressors. It is particularly effective for removing heavy oil contamination, grease deposits, and industrial fouling, making it the preferred choice for severe-duty applications. The product is suitable for both on-line cleaning during turbine operation and off-line cleaning during shutdown maintenance.
The formulation is compatible with all standard on-line and off-line injection systems. For optimal cleaning efficiency and economical chemical consumption, it is recommended to use Gas Turbine Wash F1 with a dedicated Rochem compressor cleaning system specifically designed for the turbine model in use. Rochem offers a comprehensive range of patented manual and fully automatic atomizing injection systems suitable for virtually all gas turbine types.
Gas Turbine Wash F1 is designed for both on-line and off-line compressor cleaning. It can be safely applied while the turbine is operating at any load and speed, allowing maintenance without interrupting production.
Dilute one part Gas Turbine Wash F1 concentrate with four parts clean water to form a stable cleaning solution suitable for compressor washing.
| Property | Specification |
|---|---|
| Appearance | Clear, colourless liquid |
| Shelf Life | 3 years |
| Density @ 20°C | 0.847 g/mL |
| Flash Point | 88°C |
| Physical Form | Free-flowing liquid |
| pH (20% in water) | 7.4 |
Gas Turbine Wash F1 is designed for both on-line and off-line compressor cleaning. It can be safely applied while the turbine is operating at any load and speed, allowing maintenance without interrupting production.
The formulation effectively removes a broad spectrum of contaminants commonly encountered in gas turbine compressors, including oil films, dust, hydrocarbons, and industrial deposits. It is widely recognized as the premier product for heavy-duty cleaning applications.
Routine on-line cleaning with Gas Turbine Wash F1 helps maintain compressor cleanliness, improves power output and heat rate, and minimizes the likelihood of unexpected shutdowns.
When used according to recommended procedures, Gas Turbine Wash F1 leaves no harmful residues after cleaning, ensuring optimal compressor performance and reducing the risk of secondary fouling.
The product complies with leading OEM guidelines and has an exceptional safety record, supported by successful use in thousands of gas turbines over millions of operating hours.

| Porduct Name | Gas Turbine Wash F1 |
| Part Number | RXSOL-36-3602-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |

| Product name | Cas No | EC No | Weight |
| Non ionic surfactants | - | - | 10-25 % |
| Solvent naphtha, heavy arom. | 64742-94-5 | 265-198-5 | 50-100% |
| 2-(2-butoxyethoxy)ethanol | 112-34-5 | 203-961-6 | 2.5-10% |

| Signal Word | Danger |
| Hazard Statements | H304 - May be fatal if swallowed and enters airways.H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness.H411 - Toxic to aquatic life with long lasting effects. |
| Precautionary statements | P261 Avoid breathing dust/fume/gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | No data available |

| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | Supply fresh air; consult doctor in case of complaints. |
| Eye Contact | Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor |
| Swallowed | If symptoms persist consult doctor. |
| Skin Contact | Generally the product does not irritate the skin. |
| Inhalation | No data available |
| Ingestion | No data available |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |

| Flammability | No data available |
| Suitable extinguishing media | Foam Fire-extinguishing powder Water haze |
| Unsuitable extinguishing media | No data available |
| Special hazards arising from the substance or mixture | No data available |
| Further information | No data available |
|
Hazardous combustion products |
No data available |
| Advice for firefighters | No data available |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |

| Personal precautions, protective equipment and emergency procedures | Ensure adequate ventilation Keep away from ignition sources |
| Spillage | No data available |
| Personal Protection | No data available |
| Enviromental Precaution | Inform respective authorities in case of seepage into water course or sewage system. Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.. |
|
Methods and materials for containment and cleaning |
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation |
| Reference to other sections | For disposal see section 13. |

| Advice on protection against fire and explosion | Keep away from open flames, hot surfaces and sources of ignition. |
| Incompatible materials | No data available |
| Hygiene measures | No data available |
| Advice on safe handling | Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. |
| Conditions for safe storage including any incompatibilities |
No data available |
| Storage conditions | Store away from oxidizing agents.Store in a cool place. Heat will increase pressure and may lead to the receptacle bursting. Keep container tightly sealed. |
| Storage class | No data available |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | No data available |

| Exposure controls | Personal protective equipment |
| Engineering Control | No data available |
| Eye/face protection | Tightly sealed goggles |
| Body Protection | Solvent resistant gloves Use protective suit |
| Skin protection | Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes. Avoid contact with the eyes and skin. |
| Respiratory protection |
Not necessary if room is well-ventilated. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device
|
| Other Protection Measure | No data available |

| Physical state | Fluid |
| Colour | Light yellow |
| Odour | Characteristic |
| Odor Threshold | No data available |
| pH | 7.4 |
| Melting Point | < -20°C |
| Boiling Point | 185°C |
| Flash Point | 65°C |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | Chemically unstable at 20 °C temperature and a standard pressure of 101.3 kPa |
| Explosive limits | No data Available |
| Upper/lower flammability or explosive limits | Lower 0.6 Vol % Upper 7.0 Vol %) |
| Autoignition temperature | 225°C |
| Decomposition temperature | No data available |
| Vapour pressure | 0.9 hPa |
| Viscosity | Dynamic at 20°C: 5 mPas |
| Density | 0.915 g/cm³ |
| Relative Density | No data available |
| Specific Gravity | No data available |
| Partition coefficient | log Pow: -0,3 at 25 °C - Bioaccumulation is not expected. |
| Explosive properties | No data available |
| Solubility | Dispersible |
| Ignition temperature | No data available |
| Particle characteristics | No data available |

| Reactivity | No data available |
| Chemical stability | No data available |
| Possibilityof hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials |
No data available
|
| Hazardous decomposition products | In the event of fire: see section 5 |

| Acute toxicity | Alcoholethoxylate Oral LD50 > 2000 mg/kg (rat) |
| Skin corrosion/irritation | No data available |
| Serious eye damage/irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
No data available
|
| Additional Information | Inhalation of concentrated vapours as well as oral intake will lead to anaesthesia-like conditions and headache, dizziness, etc. The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version: Irritant |

| Persistence and degradability | Easily biodegradable |
| Toxicity to fish | No data available |
| Toxicity to daphnia and other aquatic invertebrates | No data available |
| Toxicity | No data available |
| Toxicity to bacteria | No data available |
| Toxicity to algae | No data available |
| Bioaccumulation potential | No data available |
| Mobility in soil | No data availalble |
| Results of PBT and vPvB assessment | No data available |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data availalble |
| General Note | The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No.648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and will be made available to them at their direct request. Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground. Also poisonous for fish and plankton in water bodies. Toxic for aquatic organisms |

| Recommondation | Must not be disposed together with household garbage. Do not allow product to reach sewage system. |
| Waste catlogue | 15 01 04 metallic packaging 15 01 10 packaging containing residues of or contaminated by dangerous substances |
| Unclean Pakaging | Packaging may be reused or recycled after cleaning |
| Recommended cleanising agent | Water, if necessary together with cleansing agents |

| UN number | ADR/RID:3082 | IMDG:3082 |
IATA:3082 |
| UN proper shipping name | ADR/RID:ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Solvent naphta, Contains Alkyl(C3-C5) benzenes, 1,2,4-trimethylbenzene) | IMDG:ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Solvent naphta, Contains Alkyl(C3-C5) benzenes, 1,2,4-trimethylbenzene) | IATA:ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Solvent naphta, Contains Alkyl(C3-C5) benzenes, 1,2,4-trimethylbenzene) |
| Transport hazard class(es) | ADR/RID:9 | IMDG:9 | IATA:9 |
| Packaging group | ADR/RID:lll | IMDG:lll | IATA:lll |
| Environmental hazards | ADR/RID:No | IMDG:No | IATA:No |
| Special precautions for user | No data available | ||
| Further information | No data available |

| Safety, health and environmental regulations/legislation specific for the substance or mixture | The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work |
| Chemical Safety Assessment | A Chemical Safety Assessment has been carried out for this substance. |

| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |

Request a Quote & Get a Special Discount
WhatsApp us