/ / / BIOCIDE Fuel Additive

Shop

BIOCIDE Fuel Additive

​ ​ ​

Excellent control of fouling by shellfish, micro-organisms and fungal growth in FUEL systems. Also discourage corrosion of metal in the FUEL system by removal residual water and contaminants..

SKU: RXSOL-70-7008-025 Category:

Description

RXSOL ANTIFOULANT LIQUID has been developed for the control of fouling by shellfish, micro-organisms and fungal growth in FUEL systems. Its use will discourage the setting of the free-swimming larval form of the molluc. Because of its molecular film-forming properties RX ANTIFOULANT LIQUID will discourage corrosion of metal in the FUEL system.

This products is highly beneficial to prevent growth of ORGANISM like bacteria / fungi in STORAGE TANK of PETROLEUM PRODUCTS.

Now a days ULSD fuel is covering maximum fuel demand for Automobile industries, On other hand Ultra Low Sulfur Diesel (ULSD) fuel has more problems with microbial contamination than previous higher sulfur fuels. Since ULSD can no longer carry water dissolved in solution, more water is shedding to the bottom of fuel tanks, creating a life-support system and breeding ground for microbes. Parrafin content has increased as sulfur and aromatics decrease, providing a major food source to microbes. Additionally, sulfur is a natural poison to bacteria and fungus and its reduction has further exacerbated microbial contamination problems in ULSD.






Product Details

Application

 

  • Highly effective in both diesel fuel and water
  • Usefull to maintain long-term diesel fuel maintenance
  • Kills microbes (bacteria and fungus) that grow in dispersed and free water associated with diesel fuels
  • Prevents fuel-filter plugging – helps prevent fuel system failures
  • Protects fuel system components against organic acids created by microbial growth – prevents fuel tank corrosion
  • Improves fuel performance
  • Reduces engine maintenance costs
  • Effective in all diesel fuels, including Ultra Low Sulfur Diesel (ULSD), biodiesel and biodiesel blends
  • Does not contain alcohol of any kind
  • Safe for use in all diesel engines
  • Will not void engine manufacturer's warranty when used as directed
  • Controls microbial growth, fungi, and biofouling in fuels
  • Helps prevent corrosion of metal components
  • Improves fuel stability and system reliability
  • Works in marine, industrial, and storage environments

 

Dosage & Procedure

Problem and identification due to growth of Microbial.

The first indication of microbial contamination is mucous-like accumulations on fuel-filters and increased requirements for fuel-filter replacement.

Solution :::

RXSOL-70-7008 biocide effectively kill microbes to avoid microbial contamination in tank and filter. 

Treatment with RXSOL-70-7008 Diesel Fuel Biocide to kill the microbes and Clear-Diesel Fuel & Tank Cleaner to remove the residual water and contaminants.

Use 1 Ltr of RXSOL BIOCIDE Fuel Additive ANTIFOULANT behind every 1000-4000 ltrs of fuel

Technical Specifications

BIOCIDE ALGEACIDE FOR FUEL AND OIL SYSTEM TANKS

A high-performance treatment designed to control microbial fouling in fuel storage and distribution systems. It effectively prevents the growth of shellfish, bacteria, fungi, and other organisms that can cause fuel degradation. By removing residual water and contaminants, it helps reduce corrosion of metal components. Regular use ensures cleaner fuel lines, enhanced system efficiency, and reduced maintenance costs. This additive is formulated for long-lasting protection in marine, industrial, and storage fuel applications.

Notes & Precautions

Features of BIOCIDE Fuel Additive ANTIFOULANT

  • Treatment that kills a wide variety of microbiological growth in fuel systems

  • Oil soluble with “seeking the water phase” characteristic

  • Concentrated liquid

  • Suitable for marine residual and distillate fuel oils

  • Simple dosage guide for rapid initial treatment and routine preventative maintenance

Generic / Chemical Name

Fuel Biocide to kill the microbes and Clear-Diesel Fuel

Supply Locations

BIOCIDE Fuel Additive Liquid manufacturer, supplier, exporter in Mumbai, Kandla, Howrah, Visakhapatnam, Chennai, India. Ready stock of BIOCIDE Fuel Additive chemical in Fujairah, Sharjah, Muscat Barka, Oman, Kenya, Canada.

Industry Applications

FUEL ADDITIVE BIOCIDE OIL SOLUBLE manufacturer supplier in Mumbai Kandla Kolkata Vizag Chennai Fujairah Dubai Muscat Sohar Oman

Safety Data (MSDS)

Product Name : RXSOL-70-7008-025
Product Type : BIOCIDE Fuel Additive

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat, Nairobi

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

 

 Proprietory Blend of Biocide Mixture with ALIPHATIC HYDROCARBON, Fatty Amine, Alcohol Ethoxylate

Environmental Hazards

:

None

Human Health  Hazards

:

Moderates

Effect & Symptoms  : -

Ingestion

:

Harmful, if ingested. Remove to fresh air. Obtain medical attention (Without medical advice do not induce vomiting).

Inhalation

:

Remove to fresh air. Treat symptomatically. Obtain medical attention.

Skin Contact

:

Non Irritation . Remove contaminated cloth, wash off with soap and plenty of water.

Eye Contact

:

Cause Irritation. Move eyeball with plenty of clean water for atleast 15 minutes. Obtain medical attention.

A. Suitable   Foam

:

Dry Co2

B. Not suitable

:

Not applicable

C. Special

:

Not applicable

Protection of fire Fighter

:

Not applicable ( wear pressurised self contained breathing apparatus )

BIOACCUMULATION POTENTIAL

:

No data available

DEGRADATION

:

Non- Hazardous

Skin Irritation

:

No.

Sensitization

:

Not Sensitizing

Chronic Toxicity

:

Not Identified

Carcinogencity

:

No.

Respiratory System Protection

:

Approved respirator must be worn when spraying

Eye Protection

:

Chemical splash goggles

Hand Protection

:

PVC gloves

Condition to Avoid

:

Heat, Flame & Other Sources of Ignition

Materials  to Avoid

:

Do not subject to Acidic/Highly Alkaline/Oxidizing Agents.

Hazardous Decomposition Products

:

Do not occur (Bio-Degradable) 

Odour

Smells of Hydrocarbon

Appearance

Liquid, dark, brown, insoluble in water

pH

Not applicable

Boiling point

170 °C to 210 °C at 760 mm /Hg

Vapour pressure

Not known

Vapour density

(air = 1)1

Freezing point

Unknown

Insoluble in water

Specific gravity (water=1)

0.92

Flash point &gt

62 deg C (CC)

Auto-ignition point

250 deg C at 760 mm Hg

Lower Explosive limit

0.5 % (in air)

Upper Explosive limit

7 % (in air)

-   This article is considered stable under normal conditions
-   Keep away from naked flames, incandescent or hot surfaces
-   See Section 5

Toxicological information

No experimental data available.

Inhalation

Inhalation of solvent vapours may give rise to nausea, headaches and dizziness

Contact with skin

Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis.Contains Aminoethylpiperazine.  May produce an allergic reaction.

Contact with eyes 

Causes irritation.

Ingestion

Aspiration hazard , Harmful: may cause lung damage if swallowed (R65).

Carcinogenicity 

Limited evidence of carcinogenic effect (R40).

Ecotoxicity 

May cause acute effects in the aquatic environment.This product contains components which are classified in the EU as dangerous for the environment.

Mobility 

Insoluble in water 

Persistence and Biodegradability 

The components in this product are readily biodegradable.

Bioaccumulation Potential 

Hydrocarbon solvents have the potential to bioaccumilate. 

Other Adverse Effects 
 

No environmental problems are expected when the product is used / handled correctly.In its intended use, the product will not be released into the environment.

Classification

EU Waste class: 07.01.This material and/or its container must be disposed of as hazardous waste

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation

 Not classified as hazardous for Transport.

Classification and labelling

Contains Aminoethylpiperazine.  May produce an allergic reaction.

Risk Phrases

Limited evidence of carcinogenic effect (R40).Harmful: may cause lung damage if swallowed (R65).Repeated exposure may cause skin dryness or cracking (R66).Contains Dimethylpiperazine.  May produce an allergic reaction.

Safety Phrases

Wear suitable protective clothing, eye/face protection and gloves (S36/37/39).In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45).If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label (S62).

Text of R and S phrase codes used in this safety data sheet:- R21/22: Harmful in contact with skin and if swallowed; R22: Harmful if swallowed; R34: Causes burns; R40: Limited evidence of carcinogenic effect; R43:May cause sensitisation by skin contact; R50: Very toxic to aquatic organisms; R52/53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment; R65: Harmful: may cause lung damage if swallowed; R66: Repeated exposure may cause skin dryness or cracking.The information provided about the product on this Safety Data Sheet has been compiled from knowledge ofthe individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

top