Condensor Dispersant Scale Controler is chemical compounds that are dosed in cooling system water to prevent fouling of system due to biological growth such as algae, slimes and bacterial deposits. It helps to remove biofilms that are formed by these micro-organisms, which otherwise are difficult to remove by adding biocides.
By removing Biofilms, Dispersants helps to prevent MIC (Microbiologically Induced Corrosion). Condensor Dispersant Scale Controler increases the efficacy of other biocides and is completely compatible with all biocides and suitable for plant metallurgy. Condensor Dispersant Scale Controler reduces the quantity of biocides or microbiocides to be dosed.
Condensor Dispersant Scale Controler is used for Cooling Water System, Cooling Tower, Air Washers, Evaporative Condensers, Cooling Water Heat Exchangers, Radiators, Gear Boxes, Injection Mouling Machines, Blow Mouling Machines, Housings, D.G.Sets etc.
Condensor Dispersant Scale Controler can be fed continuously or by slug method to the re-circulating water. It can be injected by chemical dosing pump or fed directly to the CT sump (basin). The amount of chemical required to inhibit biofilm formation depends on the quality of feed water and plant operating conditions. The specific dosage rates will be specified by the technical executive.
- Prevention of Bio-fouling of system.
- Reduces chances of Biofilm formation.
- Avoids MIC (Microbiologically Induced Corrosion).
- Enhances efficacy of biocides and microbiocides to more than 300%.
- Compatible with all biocides and microbiocides.