Home / Product / Clean Air deodorizer-24 / Potassium Permanganate Impregnated Alumina
45.36 kg of RXSOL-24-1905-025 media will remove a minimum of 8 pounds (3.62 kg) of hydrogen sulfide.
Impregnated Activated Alumina with potassium permanganate KMNO4. This is highly porous material this material can have a surface area significantly over 200 square metres/g. High quality High crush strength power, which limits dusting, is important during loading of desiccant towers. High crush strength makes alumina effective as a prebed material when used with other types of desiccants.
Application:
Potassium Permanganate Impregnated Alumina has strong oxidizing property with Potassium Permanganate (KMnO4), it has good efficienty in removing Hydrogen Sulfide(H2S) , Chlorine(Cl2), Formaldehyde(HCHO), Nitric Oxide (NO) & Sulfur Dioxide(SO2) from air.
Dose:
Drier Chemicals manufacturer, importer and exporter of industrial chemicals and desiccants such as silica gel, activated alumina, activated carbon and carbon molecular sieves etc. High adsorption capacity. With high surface area and excellent pore distribution, Activated Alumina Desiccants has a high water adsorption capacity. This reduces initial cost, energy consumption and operating costs through smaller bed sizes and/or longer operating cycles.
Note:
Removal of hydrogen sulfide (H2S), sulfur dioxide (SO2), nitric oxide (NO), and formaldehyde (CH2O) becomes easy with Potassium Permanganate Impregnated Alumina. This media is formed from a combination of activated alumina and other binders, impregnated with potassium permanganate, providing excellent optimum adsorption, absorption, and oxidation of a wide variety of gaseous contaminants.
MSDS |
Product Name RXSOL-24-1905-025 Product Type Potassium Permanganate Impregnated Alumina
Company Details: RX MARINE INTERNATIONAL Phone +91 22 65113333 / 5555 / 9999 Fax +91 22 2781 1318 :::AOH :0091 9821214367
DANGEROUS INGREDIENTS COMPONENTS CAS NO. %BY WEIGHT ACGIH TLB OSHA PEL Aluminum oxide 1333-84-2 <97% N/D 15 (total dust), Aluminum silicate 14504-95-1 <0.2% N/D 5 (respirable) mg/m3 Potassium Permagnate 7722-64-7 PROPRIETORY BLEND
EYES: Can cause mild irritation, especially when wet. SKIN: Can cause mild irritation. INHALATION: Can cause mild upper respiratory tract irritation. INGESTION: Can cause mild irritation.
EYES: Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician. SKIN: Wash with soap and water for at least 15 minutes. Consult a physician if irritation persists. INHALATION: Remove to fresh air. Check for clear airway, breathing, and presence of pulse. Provide CPR for persons without pulse or respirations. Consult a physician. INGESTION: If swallowed, dilute by drinking large amounts of water. Never give,anything by mouth to a convulsing or unconscious person. Do not induce vomiting. Consult a physician.
SUITABLE EXTINGUISHING AGENTS: Use fire fighting measures that suit the environment. PROTECTIVE EQUIPMENT: Wear self-contained respiratory protective device. Wear fully protective suit. ACCIDENTAL RELEASE MEASURES: Person-related safety precautions: Wear protective clothing.
N/A
HANDLING: Ensure good ventilation/exhaust at the workplace. Prevent formation of dust. Provide suction extractors if dust is formed. Protection against explosions and fires: No special measures required. STORAGE: Keep material dry. Storage in one common storage facility is not required. Personal protective equipment. Do not inhale dust. Avoid contact with the eyes. Use suitable respiratory protective device in case of insufficient ventilation. Short term filter device: Filter P2. Protection of hands: impervious gloves. Eye protection: Safety glasses.
APPEARANCE: Off-white, crystalline or gelatinous granules, pellets/powder. BOILING POINT: Undetermined FREEZING POINT: 3,700°F (2038°C) VAPOR PRESSURE: Not applicable AUTOIGNITING: Product is not self igniting SPECIFIC GRAVITY: 3.2 DENSITY: Loose Bulk: 39-52 lb/ft (0.62-0.83 g/cm ). pH: 10% in water 9.4-10.1 ODOR: Characteristic
CHEMICAL STABILITY CONDITIONS TO AVOID A rise in temperature may result from contact with water. INCOMPATIBILITY None. HAZARDOUS DECCSIPOSITION PRODUCTS None if used according to specifications. HAZARDOUS POLYMERIZATION: None. Non-corrosive.
N/A N/A Collect in containers, bags, or covered dumpster boxes. If reuse or recycling is not possible, material may be disposed of at an industrial landfill. Waste disposal key: 16 03 01 513 05 N/A NA the above information is accurate to the best of our knowledge.however, since data, safety standards, and government regulations are subject |
---|
WhatsApp us