Shop

Test Iron Ore Red Dust Cleaner on a small inconspicuous area before use.
Do not apply Iron Ore Red Dust Cleaner undiluted.
A more concentrate dilution may be required where concrete has been cured for an extended period of time.
Do not leave Iron Ore Red Dust Cleaner on any surface for extended periods of time.
To maintain product integrity, keep container sealed when not in use. 

Use 10 to 20% of Iron Ore Red Dust Cleaner with  fresh water and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet. Click for More details http://rxmarine.com/Iron-Ore-cleaning-direction

Very effective products to removes rust and stains also improves metal appearance.

Direction for use

FOR HEAVY DUTY IRON ORE RUST REMOVER should be diluted  with water  1:4 . Then solution can be applied by brushing, spraying for  10 - 20 minutes the residues should be rinsed off thoroughly with high pressure  water.

IRON ORE RUST REMOVER manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of IRON ORE RUST REMOVER at a competitive price from us. We have ready stock of IRON ORE RUST REMOVER in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat

Ethoxylated Fatty alcohol, Phosphoric Acid and Long chain Detergent  remaining which is not in the list of hazardous materials .

Human Health  Hazards    R 34 : Causes Burns
Keep away from food, children , animal .

Non combustible product

NOTE :
Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to  water never add water to RXSOL.)

Personal protection:

Decomposition Products: Do not occur hazard if stored and used as directed.  In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced. 
NOTE : AVOID CONTACT WITH ALKALINE SUBJECT.

 RXSOL-16-1088-025 is degradable and due to highly acidic in nature must be neutralized as per guidance and ingridents used in it. 

As per guide line, Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required.

Classification and labelling according to 4. Novelle Gefahrstoff-Verordnung Symbols of danger :C Corrosive Ingredients : Phosphoric acid R-phrases :

National prescriptions : Self classification on the basis of component assessments or analogy conclusions without addition/subtraction of points
for good/poor biodegradability etc.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe
our products from the point of view of safety requirements and is not intended to guarantee any particular properties.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.