RPO Rubber Oil Cleaning chemical

For cleaning of RPO / fuel oils asphalt, wax deposition and for local cleaning and degreasing of engine rooms on deck.

SKU: RXSOL-34-2020-210 Category: RIGS Oil Field

Description

RPO Rubber Oil Cleaning Chemical – High-Performance Cleaner for Rubber Process Oil Residues

Name: RPO Rubber Oil Cleaning chemical
SKU: RXSOL-34-2020-210

RPO Rubber Oil Cleaning Chemical is a specially formulated industrial cleaning solution designed to remove Rubber Process Oil (RPO), carbon black, grease, rubber residues, wax, bitumen, and heavy hydrocarbon deposits from machinery, processing equipment, pipelines, storage tanks, and production areas. Its powerful blend of surfactants and cleaning agents penetrates stubborn oil deposits, restoring equipment efficiency while reducing maintenance time.

New Org Powerful is an extremely effective liquid blend of concentrated emulsifier with penetrating agents , mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for RPO / fuel oils It can also be used for BOILERS, MARINE DIESEL ENGINE maintenance and cleaning SYSTEM and for local cleaning and degreasing of engine rooms on deck.

Product Details

Application

Directions for Use and Dose Rates: RXSOL-20-2020 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck. Soak Method for heavy soil put parts into undiluted RXSOL-20-2020, for general soiling use a solution of 10-30% RXSOL-20-2020 water. Parts should be soaked for at least 30 minutes before washing off with water. Spraying Method Use neat RXSOL-20-2020 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.

Rock and Roll Method Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.

1) First of all heat the remaining oil in tanks .

2)By stripping constantly. flush the tank with sea water,

3) Close all suction and discharge valves .

4) 1st Dose Fill the tanks by ½ to 1 litre RXSOL-20-2020 per tone of water through pipe or manhole , for 75-80% of capacity of tank to be cleaned.

5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.

6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.

7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.

8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:

9) For completion add second dose of RXSOL-20-2020 , fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .

10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.

11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely
Dosage Chart for Rock and Roll Cleaning
Fuel Oil Viscositry Centistokes at 50°C Over 320 and sludge tanks
RXSOL-20-2020/ 1000 Lts of water
1st Stage              2nd Stage
1 litre                     1 litre             150 - 300
1 litre                      0.75 litre       Up to 50
0.5 litre …

PHYSICAL PROPERTIES :

COLOUR	Light brown liquid
DENSITY	In g/cm3 at 15°C: 0.9
FLASH POINT	Above 70 °C
PACKAGING	Order No:.RXSOL-20-2020	Size (in litres)25 , , 210

Dosage & Procedure

CHARACTERISTIC :

• Highly effective concentrated cleaner .

• Versatile, can be used for a wide application range ( for TANK or general cleaning .)

• Provides quick and thorough emulsifying action.

• Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.

• May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.

• It can be used as a general purpose cleaner to remove oil and grease deposits and cleaning of bilge spaces and engine rooms from soiled surfaces.

• Can be used for degreasing and cleaning engine cooling water systems Read the Material Safety Data Sheet before using this product

Notes & Precautions

Specially formulated for cleaning of oily Greasy Surface

Generic / Chemical Name

Powerful Emulsifier Degreaser

Supply Locations

RPO Rubber Oil Cleaning Chemical, Rubber Process Oil Cleaner, Rubber Oil Degreaser, Tyre Industry Cleaning Chemical, Carbon Black Cleaner, Industrial Rubber Cleaner, Rubber Manufacturing Cleaning Chemical, Heavy Duty Oil Cleaner, Rubber Machinery Cleaner, Rubber Plant Maintenance Chemical, Industrial Degreaser, Hydrocarbon Deposit Remover.

New Org Powerful manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of New Org Powerful at a competitive price from us. We have ready stock of New Org Powerful in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Industry Applications

RPO Rubber Oil Cleaning Chemical – High-Performance Cleaner for Rubber Process Oil Residues

This cleaner is ideal for rubber manufacturing plants, tyre industries, conveyor belt manufacturers, polymer processing units, automotive component manufacturers, and industrial maintenance facilities.

What is RPO Rubber Oil Cleaning Chemical?

RPO Rubber Oil Cleaning Chemical is a heavy-duty degreasing and cleaning agent developed to dissolve and emulsify rubber process oils and petroleum-based contaminants. It effectively removes sticky residues without causing excessive damage to properly maintained metal surfaces when used according to the recommended dilution and application procedures.

Key Features

Rapidly removes Rubber Process Oil (RPO) deposits
Dissolves grease, carbon black, wax, and hydrocarbon residues
Excellent penetration into stubborn oil films
Suitable for manual and automated cleaning systems
Fast rinsing with minimal residue
Helps restore equipment efficiency
Reduces maintenance downtime
Economical concentrated formulation

Applications

Rubber manufacturing plants
Tyre manufacturing industries
Conveyor belt production
Mixing mills and Banbury mixers
Extruders and calenders
Storage tanks and transfer lines
Processing equipment
Industrial machinery and workshop floors
Automotive rubber component manufacturing

Benefits

Powerful Degreasing Action

Quickly breaks down heavy rubber oils, grease, and carbon deposits.

Improves Equipment Performance

Keeps machinery clean for efficient production and reduced wear.

Reduces Maintenance Costs

Minimizes manual cleaning effort and shortens maintenance shutdowns.

Easy to Use

Can be applied by spraying, brushing, soaking, or circulation cleaning.

Versatile Cleaning Solution

Suitable for a wide variety of industrial cleaning applications.

Typical Directions for Use

Heavy deposits: Use undiluted or dilute 1:2 with water.
General cleaning: Dilute 1:5 to 1:10 with water.
Routine maintenance: Dilute 1:10 to 1:20 with water.

Apply the solution to the contaminated surface, allow 5–15 minutes of contact time, agitate if required, and rinse thoroughly with water or wipe clean.

Typical Properties

Property	Typical Value
Appearance	Clear to amber liquid
Odor	Mild characteristic
Solubility	Completely soluble or emulsifiable in water
Application Method	Spray, Brush, Soak, Circulation
Packaging	5 L, 25 L, 210 L Drum, 1000 L IBC (custom packaging available)

Industries Served

Rubber manufacturing
Tyre industries
Polymer processing
Automotive component manufacturing
Industrial maintenance
Engineering workshops
Heavy equipment maintenance
Chemical processing plants

Why Choose RPO Rubber Oil Cleaning Chemical?

Our RPO Rubber Oil Cleaning Chemical is engineered to tackle the toughest rubber oil and carbon-based contaminants encountered in manufacturing and industrial environments. Its powerful cleaning action helps improve production efficiency, extend equipment life, and reduce maintenance costs while delivering reliable, consistent performance.

Safety Data (MSDS)

Product Type

Product Name	:	RXSOL-20-2020-025
:	NEW ORG

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	:	+91 22 65113333 / 5555 / 9999 / 27611360
Fax	:	+91 22 2781 1318 :::AOH :0091 9821214367
Email	:	123@rxmarine.com
Website	:	www.rxmarine.com

Chemical Name

Hydrogenated Mixture

organic solvents

Fatty Alcohol Ethoxylate

Mixture of the substances listed below with no hazardous additions. Hydrogenated Mixture of C10-C13 organic with Fatty Alcohol Ethoxylate 34398-01-1 1 - 5 Xi,36/38
10-25% No Hazardous addition.

Human Health Hazards R 36/38

Causes Irritation / Inhalation may cause a headache & dizziness . may cause adverse effects to the aquatic environment.
Keep away from food, children, animal.

INHALATION	supply fresh air on irritation medical attention requires & show this MSDS to the physician.
SKIN contact	In case of contact with skin, wash immediately with plenty of water and soap Remove contaminated clothes. On extra irritation use ointment on Doctor advice.
EYE contact	Flush with running water on open eyelids for at least 15 minutes, Immediately medical attention required.
INGESTION	Seek medical attention, don’t try to drink more water/milk because of too much water increase the danger of vomiting. ( on vomiting always keep head low to prevent inhalation of airways )

Suitable Water, fog or mist, alcohol-resistant foam, on small fires dry chemical, carbon dioxide (CO2) also can be used.
Not suitable Alcohol foam / and high pressure of water jet may cause splitting of excess materials.
Special container close to fire cooled immediately then remove to another place.
Precaution for fire-fighters Self-contained breathing apparatus or apparatus should be attached to the air supply.
NOTE: fired material vapours are heavier than air and may travel along the ground for to ignition sources, so try to move all sources to safe distance otherwise keep in cooling mode.

ENVIRONMENTAL PRECAUTION	Direct flow into the drainage system, surface or groundwater is prohibited.
CLEANING METHOD	for preventing the spreading of materials remove spill mechanically or with absorbent materials and dispose of in accordance with section 13.Flush with large amounts of water to clean the area.Ventilate well.
Personal	During usage of chemical personal should use all normal protective equipment and avoid contact with eye and skin and for use in close environment personnel should use respiratory breathing apparatus.

Condition to Avoid	Flammable but the product is stable under normal condition, take precaution as an industrial chemical.
Materials to Avoid	Do not subject directly to ALKALINE / Acidic medium.
Handling Keep Container Tightly Closed in the original container and keep away from open flames/ignition sources
NOTE: Eyewash facilities require at the workplace The product causes corrosion on the skin and mucous membranes GENERALLY Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic/basic medium neutraliser. For example, if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com • Dilute in water (always use the plastic jar and RXSOL should be added to water never add water to RXSOL.)

Personal protection
Respiratory System Protection	Approved respirator must be worn when spraying otherwise normally not required.
Eye Protection	if there is the possibility to contact wear goggles for eye protection.
Hand protection	Wear PVC chemical resistance protective gloves.
Other Information	Smoking in store/work area is prohibited.

APPEARANCE	Clear brownish liquid
DENSITY	g/cm3 at 15°C: 0.89
pH	NA
FLASHPOINT	90 ºC
Boiling point	210 ºC
Ignition temp	N/A
SOLUBILITY	Emulsifiable with water / soluble in most solvents

Stable under the Normal Condition on access to heat Vapour/gas may form explosive mixtures with air.
Hazardous Decomposition Products	No decomposition if stored and used as directed. In FIRE combustion CO, CO2, NH3, SOX etc hazardous gas produced.
NOTE	AVOID CONTACT WITH ALKALINE SUBJECT / high temperature / fire .
Note	MATERIALS TO AVOID Hydrocarbons and their derivatives may attack certain types of plastic, rubber and paint.

Skin Irritation	Gives irritation may cause dryness. And prolonged contact with skin can cause degreasing effect.
Eye Irritant	Cause severe irritation
Sensitization	Sensitizing properties not known
Chronic Toxicity	Not Identified
Carcinogenicity	Not regulated. ( prolonged inhalation of solvents may cause chronic solvent intoxication.

RXSOL OB 1005 emulsifies in water and degradable, Toxic to aquatic organism & dangerous for the environment but no environmental problem will create when the product is used correctly . in its intended use the product will not be released into the environment.

As per guideline of local rules and regulation and before disposal and neutralization pl. refer 07 article...

Goods classified for road / rail / sea transport : YES with UN-no: : 3082
Proper shipping name: Environmentally hazardous liquid: contains (Alkyl (C3-C8) Hydrocarbon)
Hazard identification no.: 90 Product identification (UN) no.: 3082
TREMCARD no. CEFIC: 90G01
Marine pollutant: Yes
Flashpoint: 90 ºC
Label colour: White./Black.

Symbols	Xn, N
Contains	Hydrocarbons, Alkyl (C3-C8)
R-phrases	R-51/53 Toxic to aquatic organisms/may cause long-term adverse effects in the Environment R-52 Marine Pollutant
R-65 Harmful	May cause lung damage if swallowed
S-phrases	S-23 Do not breathe vapour S-24 Avoid contact with the skin S-60 This material and its container must be disposed of as hazardous waste S-61 Avoid spillage to the environment. Ask for special instructions/safety
Datasheet	S-62 If swallowed, do not induce vomiting; seek medical advice immediately S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
REFERENCES	Classified according to European directive on the classification of dangerous preparations 90/492/EEC and accordance with EU Directive 88/379...

on the basis of information and experience as well as our present knowledge, this guideline is only safe for handling, use, processing, storage, transport, disposal and discharge; this is not a guarantee or quality of specification. And the combination with other products will lose the properties. It is always the responsibility of the user to take all necessary steps to ensure that information given here is read and understood by all who use, handle, dispose of or in any way come in contact with the product.
It is not to be considered as a guarantee of the properties of the product.
Disclaimer ::::::: The information in this MSDS is meant as a description of the safety requirements of our product.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Shop