Grease Trap Solv Cleaner

Very effective cleaner for sticky Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor

SKU: RXSOL-40-2019-020 Category:

Description

RXSOL GREASE SOLVEX is a high-performance solvent-based emulsifiable cleaner specifically designed for removal of heavy grease, fats, oils, and sludge from grease traps, interceptors, pipelines, and municipal wastewater systems.

It rapidly penetrates and dissolves hardened grease deposits and converts them into emulsified form for easy flushing and removal.

Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated  for the removal of  tuff oily stains residues, with out the need for Scrubbing or Brushing  which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.

Same Family PRODUCT :::  www.rxmarine.com/STICKNSOL    ( STICK N SOL , RXSOL-15-1017-025 )

 

This heavy duty cleaner is a biodegradable degreaser (oil dispersant). It disperse and remove all types of oil, grease, wax, and stains, leaving the treated surface cleansed and back to original condition without any short or long term effects.  And  This cleaner is powerfull substitute of IPA, Methyl Ethyl Ketone , acetone, and other hazardous alcohol and solvents. This product have low evaporation rate and high solvency formula can significantly reduce overall solvent usage. It contains no water and it is 100%  reactive proprietory blend.






Product Details

Application

Where to use Grease Trap Oil Grease Fat Cleaner
  • Grease traps and grease interceptors
  • Municipal wastewater grease chambers
  • Commercial kitchen drainage systems
  • Sludge and grease removal in pipelines
  • Oil & fat buildup in treatment plants

Features

  • Unique chemical formulation for cleaning of  graffiti from smooth and rough surfaces
  • Non- toxic.
  • Extends time between cleans.
  • Safe to handle.
  • Effective removal of Heavy DEPOSITS.
  • Can be applied by all normal methods.
  • Formulated to be very cost effective.
  • Does not contain chlorinated hydrocarbons.
  • Can be used on all metals & most painted surfaces.
  • Environmentally friendly.
  • Non-Corrosive.
  • 100% Active.
  • Dries Completely.
  • Does not require special feeding equipment for safe application.
  • Cleans and flushes painting instrument like spray guns, paint lines, mixing tanks, and general purpose paint jobs
  • Removes and cleans wax for surface preparation for paint, glue, and assembly applications
  • very effective to remove   sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass
  • Cleans and degreases a variety of parts, tools, and equipment
  • Removes soot, grease, oil, grime, and diesel fuel
  • Handles tough automotive and transportation cleaning jobs
  • Cleans toner, copier equipment, and machinery including printing presses
  • Clean heavy duty oily and tar deposits
  • Flushes and cleans polyesters, vinyl ester, and epoxy lines
  • Removes polyurethanes, varnishes, enamels, and UV curable coatings
  • Cleans and prepares material surfaces such as metals

Dosage & Procedure

To know how to effeciently clean greasy mess, foul odor, or bacteria growth of your grease trap/interceptor, use RXSOL Grease Trap Solv Cleaner and RXSOL Grease Trap BioClean by following the link: https://rxchemicals.com/blog/how-clean-grease-trap-interceptor-oil-fat-grease

Technical Specifications

Product Properties:-

Product Name 

Grease Trap Solv Cleaner (Wetting Emulsifying Agent )

Active Matter                    

100%

 

Consistency  

Liquid

 

Emulsifying Property       

Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , 

 

Wetting Property        

Good Wetting & Emulsifying Property

 

Ionic Nature                     

Non-Ionic

 

Colour    

Pale Yellow

 

Appearance

Clear liquid

 

Odour                 

Pine based

 

Notes & Precautions

 

  • Cleans and flushes paint spray guns, paint lines, mixing tanks, and general purpose paint jobs
  • Removes graffiti from smooth and rough surfaces
  • Removes and cleans wax for surface preparation for paint, glue, and assembly applications
  • Removes vinyl graphics from boats, signs, trucks, and glass
  • Cleans and degreases a variety of parts, tools, and equipment
  • Removes soot, grease, oil, grime, and diesel fuel
  • Handles tough automotive and transportation cleaning jobs
  • Cleans and removes adhesive caulking and bedding compounds
  • Cleans glue residues, resin, and hardener
  • Cleans toner, copier equipment, and machinery including printing presses
  • Removes tar and sap
  • Flushes and cleans polyesters, vinyl ester, and epoxy lines
  • Removes polyurethanes, varnishes, enamels, and UV curable coatings
  • Cleans and prepares material surfaces such as metals

Generic / Chemical Name

Grease Trap Cleaner for Grease and Oil

Supply Locations

Grease Trap Solv Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Grease Trap Solv Cleaner at a competitive price from us. We have ready stock of Grease Trap Solv Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Safety Data (MSDS)

Product Name Grease Trap Solv Cleaner
Product Number RXSOL-40-2019-020

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 
Email mail@rxmarine.com
Website www.rxmarine.com

Chemical Name

CAS Number

Percent Range 

Index number

Ethoxylated Alcohol 68439‐46‐3  5%  
Tetrapotassium Pyrophosphate 7320‐34‐5 5%  

Butoxyethanol

111-76-2 2

5%

603-014-00-0

Sodium Citrate 68‐04‐2 5%  
Ethyl Lactate 97-64-3 7%  
Proprietory Blend ------------- 80%  

EYE Contact ::: Gives Irritation
Skin Contact::: Under typical condition No adverse effects, Dryness can caused on prolonged exposure.
Ingestion ::: May cause stomach or intestinal irritation if swallowed.

R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R 36/38 Irritating to eyes and skin.

General information Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

After inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.In case of unconsciousness place patient stably in side position for transportation.

After skin contact 

Immediately wash with water and soap and rinse thoroughly.

After eye contact 

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing

Call for a doctor immediately.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: Mouth respiratory protective device.

Person-related safety precautions: Not required.
Measures for environmental protection: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.

Handling:
Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
111-76-2 2-butoxyethanol

PEL (USA)

 

REL (USA)

 

TLV (USA)
WEL (Great Britain)

240 mg/m³, 50 ppm
Skin
24 mg/m³, 5 ppm
Skin
97 mg/m³, 20 ppm
Short-term value: 246 mg/m³, 50 ppm
Long-term value: 98 mg/m³, 20 ppm
Skin
Short-term value: 50 ppm
Long-term value: 25 ppm

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands:Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

General Information

Phase

Oily Liq Phase

Colour

Colourless

Odour

Characteristic

Change in condition

Melting point/Melting range

Not Applicable

Flash point

65°C

Ignition temperature 240°C
Density at 20°C 0.9 g/cm³
Solubility in / Miscibility with water at 20°C 70% 

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Dermal

LD50

LC50

1480 mg/kg (rat)

400 mg/kg (rab)

Primary irritant effect:
on the skin Irritant to skin and mucous membranes.
on the eye Irritating effect.
Sensitization No sensitizing effects known.

100 % Biodegradable, No adverse effects known or suspected. Not listed toxic

Take up with sand or other non-combustible absorbent material and place into container for disposal. Flush entire area with water. 
Dispose after dilution with water. Recommendation Must not be disposed directly and together with household garbage.

Uncleaned packaging:
Recommendation: Disposal must be after dilution with water.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

IATA - Non Regulated, Hazardous Substances : Non, Dot Clasification : Combustible Liquid ,

Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases: 20/21/22 Harmful by inhalation, in contact with skin and if swallowed. 36/38 Irritating to eyes and skin.
• Safety phrases: 2 Keep out of the reach of children. 36/37 Wear suitable protective clothing and gloves. 46 If swallowed, seek medical advice immediately and show this container or label.

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

top