/ / / Corrosion Inhibitor Amine Based

Shop

Corrosion Inhibitor Amine Based

​ ​ ​

Concentrated liquid neutralising agent for corrosion control in condensate and feed water systems, contain blends of low, medium and high volatility amines that provide great protection and neutralization of acidic gases, such as CO2

SKU: RXSOL-44-5005-025 Category:

Description

RXSOL-44-5005-025  Concentrated liquid neutralising agent for corrosion control in condensate and feed water systems, contain blends of low, medium and high volatility amines that provide great protection and neutralization of acidic gases, such as CO2 throughout a condensate system. Protects boiler surfaces by forming an iron tannate film.
A liquid neutralizing amine used to control corrosion and pH in steam and condensate systems.

 

PRODUCT INTRODUCTION
Pure anisole or methoxybenzene, is an organic compound. CAS NO: 100-66-3
HANDLING & STORAGE
Keep away from heat and sources of ignition.
Store in a sealed condition at ambient temperature or below. Keep containers in tightly closed condition.
Use proper PPE during handling.
PRODUCT APPLICATION
Used as solvent, as an intermediate in making of dyes, pharmaceuticals, fragrances and as an insect pheromones.
PROPERTIES
Appearance
Clear Colorless Liquid
Purity ( by GC ) , %
99.8 Min
Specific Gravity @25°C
0.9995 ± 0.05
Moisture (by KF) , %
0.3 Max
PACKAGING
Packed in drums or in ISO TANKS on request.





Product Details

Application

Corrosion Inhibitor Amine Based is a blend of volatile liquid / steam distributions ratios that neutralise the acid contaminants in condensate and feed water thus providing protection against acid corrosion in the complete system.The most common cause of acid corrosion in condensate and feed water systems is dissolved carbon dioxide. Condensate control neutralises this acid and maintains the condensate and feed water in an alkaline condition
Used in medium and high-pressure boilers including ultra high-pressure boilers.

Fields Of Application:-
Corrosion Inhibitor Amine Based is an effective neutralizing type corrosion inhibitor & oxygen scavanger  for steam condensation system. And can also be used to protect Boilers /Metals surfaces form corrosion.It removes oxygen efficiently in open feed systems and gives effective corrosion inhibition of boiler/exhaust gas economizer system surfaces . Its Chemical reaction by converting Fe2O3 (rust) to organic iron compound protect further IRON rust reaction .

Operating Process:-
RXSOL-CC72 neutralizes the acid components of feed water.The proportion of Corrosion Inhibitor Amine Based depends upon the Carbon dioxide content of the condensate. Basically Corrosion Inhibitor Amine Based neutralizes the acid contents & maintains the condensate and feed water in the alkaline condition.  It also protects copper based metals.

PRODUCT APPLICATION
Used as solvent, as an intermediate in making of dyes, pharmaceuticals, fragrances and as an insect pheromones.

Dosage & Procedure

Corrosion Inhibitor Amine Based condensate is tested for PH to determine the dosage level. The PH limits are 8.3 - 9.0 . For an average system e. g. 10-M3, the dosage is approximately 0.65 ltr / day .

The necessary amount of Corrosion Inhibitor Amine Based is required or injected as frequently as to maintain the pH of the condensate at the main condensate pump outlet between 8.6-9.5 .  The amines pass over with the steam and have the dual function of elevating the pH of the steam/condensate and putting a protective micro film on the system pipe work. Acidic condensate is the result of carbonic acid (H2CO3) being formed as CO2 is released in the steam.Condensate prevents corrosion by carbonic acid on live systems. Its filming properties also reduce corrosion on shut down lines, when moisture and oxygen are present.

Technical Specifications

We carry a complete line of condensate treatment chemicals.  Condensate treatment chemicals are used to increase the condensate pH, thus reducing corrosion to the entire boiler steam system.  The most common product is a tri-blend amine of cyclohexylamine, morpholine, and diethylaminoethanol (DEAE) neutralizing amines, although we do have standard RXSOL products or we can custom blend to your needs.
RXSOL-50-5005-DCM1          10% DEAE, 10% Cyclo, 10% Morpholine   
RXSOL-50-5005-DCM2          20% DEAE, 20% Cyclo, 20% Morpholine   
RXSOL-50-5005-C                  20% Cyclohexylamine    
RXSOL-50-5005-D                  20% DEAE    
RXSOL-50-5005-M                  20% Morpholine   
RXSOL-50-5005-C5                50% Cyclohexylamine    
RXSOL-50-5005-D                  50% DEAE  
RXSOL-50-5005-M5                50% Morpholine    
  

PRODUCT INTRODUCTION
Pure anisole or methoxybenzene, is an organic compound. CAS NO: 100-66-3
HANDLING & STORAGE
Keep away from heat and sources of ignition.
Store in a sealed condition at ambient temperature or below. Keep containers in tightly closed condition.
Use proper PPE during handling.
PRODUCT APPLICATION
Used as solvent, as an intermediate in making of dyes, pharmaceuticals, fragrances and as an insect pheromones.
PROPERTIES
Appearance
Clear Colorless Liquid
Purity ( by GC ) , %
99.8 Min
Specific Gravity @25°C
0.9995 ± 0.05
Moisture (by KF) , %
0.3 Max
PACKAGING
Packed in drums or in ISO TANKS on request.

 
 

Notes & Precautions

  • Easy to use liquid treatment.
  • Neutralizes the acids occurring in the condensate system.
  • Less maintenance required. Lower operating costs and increased reliability.
  • Volatilizes and carries over with the steam and so is recycled. Dosage is economical and efficient.
  • Simple test to determine level of treatment.
  • Used for protection of condensate and feed water systems in boiler systems of all pressures.
PRODUCT INTRODUCTION
Pure anisole or methoxybenzene, is an organic compound. CAS NO: 100-66-3
HANDLING & STORAGE
Keep away from heat and sources of ignition.
Store in a sealed condition at ambient temperature or below. Keep containers in tightly closed condition.
Use proper PPE during handling.
PRODUCT APPLICATION
Used as solvent, as an intermediate in making of dyes, pharmaceuticals, fragrances and as an insect pheromones.
PROPERTIES
Appearance
Clear Colorless Liquid
Purity ( by GC ) , %
99.8 Min
Specific Gravity @25°C
0.9995 ± 0.05
Moisture (by KF) , %
0.3 Max

 

PACKAGING
Packed in drums or in ISO TANKS on request.

Generic / Chemical Name

Neutralising agent for corrosion control in condensate and feed water systems

Supply Locations

Corrosion Inhibitor Amine Based Corrosion Control manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Corrosion Inhibitor Amine Based Corrosion Control at a competitive price from us. We have ready stock of Corrosion Inhibitor Amine Based Corrosion Control in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Safety Data (MSDS)

Product Name : RXSOL-44-5005-025
Product Type : Corrosion Inhibitor Amine Based

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Visakhapatanm - Gangavaram, Chennai - Ennore, Fujairah, Muscat Oman, Kenya, Canada

Phone : +91 22 27815540 / 41 / 42
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

Chemical Name

Concentration,%

CAS Number

EC Number

2-Amino Ethanol

5-10

141-43-5

205-483-3

2-Diethyl Amino Ethanol

1-10

100-37-8

202-845-2
Morpholine 5-10 110-91-8 203-815-1

Propreitory Ingredients

>70

-

-

Corrosive

Corrosive

Odour

Slight smell of ammonia.

Appearance

Liquid, pale yellow, soluble in water.

Contact with eyes

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract

Contact with skin

May cause redness and irritation.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

Ingestion

Not regarded as a potential route of exposure., In cases of severe exposure,Gastro-intestinal disturbances may develop.

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water.When in doubt or symptoms persist, seek medical attention Contaminated clothing should be laundered before reuse

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Seek medical advice

Ingestion

Do not induce vomiting.Never give anything by mouth to an unconscious person.Give 200-300mls (half pint) water to drink.Seek immediate medical attention

Inhalation

Remove patient to fresh air.Seek medical attention if ill effects occur

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)



 

-   Not flammable
-   Nitrogen and carbon oxides may be formed
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

Do not allow to enter public sewers and watercourses.

Clean Up Actions

Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete.

Special Precautions

Wear protective clothing as per section 8.

Handling

When using do not eat, drink or smoke (S20/21).Avoid contact with skin and eyes (S24/25).Eye wash bottles should be available.See Section 8.

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49).

Exposure Limits

There are no recommended or established controls for this product.TLV (TWA) 1 ppm, 2.5 mg/m3 (2-Aminoethanol).TLV (TWA) 2ppm, 9.6 mg/m3 (2-Diethylaminoethanol)

Exposure controls

No special precautions are required for this product

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended).Respiratory protection may be required under exceptional circumstances when excessive air contamination exists.

Odour

Odourless

Appearance

Liquid, pale yellow, soluble in water

PH

Alkaline

Boiling point

~ 100 °C at 760 mm /Hg

Vapour pressure

not known

Vapour density

not known

Freezing point

~ 0 °C at 760 mm/Hg

Completely soluble in water

Specific gravity (water=1)

1.0

Not flammable

-    This article is considered stable under normal conditions
-    Avoid overheating, Keep away from frost
-    See Section 5

Toxicological information

LD50 (oral,rat) 2100 mg/kg.( 2-Aminoethanol).LD50 (oral,rat) 1320 mg/kg.( 2-Diethylaminoethanol)

Inhalation

In cases of severe exposure, irritation may develop

Contact with skin

Causes irritation

Contact with eyes

Causes redness and irritation

Ingestion

The ingestion of significant quantities may cause gastro-intestinal disturbances

Carcinogenicity

No evidence of carcinogenic effects

Ecotoxicity

This product does not contain ingredients which are classified in the EU as dangerous for the environment.

Mobility

Completely soluble in water

Persistence and Biodegradability

The components in this product are readily biodegradable.

Bioaccumulation Potential

Bioaccumulation of the components in this product is insignificant.

Other Adverse Effects

No environmental problems are expected when the product is used / handled correctly . In its intended use, the product will not be released into the environment.Presents little or no hazard to the aquatic environment.

Classification

EU Waste class: 07.01

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point. Disposal should be in accordance with local, state or national legislation

-  Not classified as hazardous for transport

Risk Phrases

Irritating to eyes, respiratory system and skin (R36/37/38)

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26).Wear suitable gloves and eye/face protection (S37/39)

Text  of  R  and  S  phrase  codes  used  In   this  safety  data  sheet :- R10: Flammable;  R20 : Harmful   by inhalation; 
R20/21/22: Harmfulby  inhalation,  in  contact  with  skin  and  if  swallowed;
R34: Causes burns;
R36/37/38: Irritating  to eyes,  respiratory  system  and  skin.The  information  provided about  the  product  on t his Safety Data Sheet has been
compiled   from  knowledge   of the   individual  constituents. Thedata  given  here is  based   on current  knowledge and experience .
This  Safety Data  Sheet  describes  the  productIn  terms   of  safety   requirements   and  does  not   signify  any  warranty  with  regard 
to the product's  properties The  data  given here only applies  when  product used for proper application(s).The product is not sold as suitable 
For  othe r applications - usage in such may cause risks not mentioned  in  this  sheet. 
Do  not  use  for other application(s) without seeking advice from manufacturer.
This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive (67/548/EEC)
This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directive (88/379/EEC)
This Safety Data Sheet is provided in compliance with The Safety Data Sheets Directive (2001/58EC)

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top