Description
Petroleum Jelly manufacturer, supplier and exporter.
Petroleum Jelly
Petroleum jelly is a a semisolid jelly-like substance. very good lubricity properties, moisture loss resistance to lotions, creams, ointments etc and isused as a vehicle in ointments & other formulations in pharmaceutical / cosmetic industry.
Product Details
Application
This product is used in Industries like,
- Cosmetics
- Drugs & Pharmaceuticals
- Food Processing and Handling
Dosage & Procedure
White translucent soft mass, Unctuous to touch, Odorless and tasteless not more than slightly fluorescent by daylight when melted.
PERFORMANCE STANDARDS
- Jelly resists change in its structure without sweating under normal Operating conditions.
- Essentially Meets IP/BP/USP Standard
Technical Specifications
| CHARACTERISTICS | : | SPECIFICATION |
| Description | : | A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin |
| Solubility | : | Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol |
| Drop Point Deg.C | : | 40 – 60 |
| Consistency Dmm | : | 100-300 |
| Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm | : | As per specification |
| Acidity or Alkalinity | : | As per specification |
| Polycyclic Aromatic Hydrocarbons | : | As per specification |
| Sulphated Ash,% | : |
0.05 Maximum |
Notes & Precautions
KEY BENEFIT :
It exhibits very good lubricity properties, moisture loss resistance to lotions, creams, ointments etc and isused as a vehicle in ointments & other formulations in pharmaceutical / cosmetic industry. Our Petroleum Jellies are stable to light & oxidation and keeps good structure during processing. This product is treated for harmful polycyclic aromatic impurities and it passes the Polycyclic. Aromatic Hydrocarbon test along with other purity norms in the Pharmacopoeia and complies to all the Regulatory requirements as per the European commission.
Active Matter
100
Generic / Chemical Name
Petrolatum
Areas of Use
RXSOL Petroleum Jelly for UPS Battery is a premium-quality, high-purity protective grease designed to protect battery terminals and connectors from corrosion, oxidation, moisture, and acid fumes. It forms a long-lasting, non-conductive protective film that ensures reliable electrical connections, reduces maintenance, and extends the service life of UPS, inverter, telecom, and industrial batteries.
Key Features & Benefits of using RXSOL Petroleum Jelly for UPS Batteries:
- Protects battery terminals against corrosion and oxidation.
- Prevents the ingress of moisture, dust, and environmental contaminants.
- Forms a durable, non-conductive protective coating.
- Resistant to acid fumes generated during battery charging.
- Minimizes voltage drop caused by corroded terminals.
- Improves electrical connection reliability and battery performance.
- Extends battery terminal and connector service life.
- Suitable for UPS, inverter, telecom, automotive, and industrial batteries.
- Easy to apply and remains effective over extended periods.
Supply Locations
Petroleum Jelly Manufacturer, Exporter and supplier in Kolkata Howrah, Mumbai Navi Mumbai MIDC, Gandhidham Gujrat GIDC, Chennai Ennore, Visakhapatnam, Fujairah UAE Middle East, Dubai, Sharjah, Abudhabi, Ajman, Diera, Muscat Barak, Sohar, Oman
Industry Applications
White translucent soft mass, Unctuous to touch, Odorless and tasteless not more than slightly fluorescent by daylight when melted.
PERFORMANCE STANDARDS
Jelly resists change in its structure without sweating under normal Operating
Essentially Meets IP/BP/USP Standard
This product is used in Industries like, Cosmetics
Drugs & Pharmaceuticals
Food Processing and Handling
It exhibits very good lubricity properties, moisture loss resistance to lotions, creams, ointments etc.
and is used as a vehicle in ointments & other formulations in pharmaceutical / cosmetic industry.
Our Petroleum Jellies are stable to light & oxidation and keeps good structure during processing.
This product is treated for harmful polycyclic aromatic impurities and it passes the Polycyclic
Aromatic Hydrocarbon test along with other purity norms in the Pharmacopoeia and complies to all the Regulatory requirements as per the European commission.
Safety Data (MSDS)
| Product Name | Petroleum Jelly |
| Part Number | RXSOL-16-1746-001 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai. Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 123@rxmarine.com | |
| Website | www.rxmarine.com |
| Ingrident | CAS Number | Weight Percentage |
| Petroleum Jelly | 8009-03-8 | 100% |
Toxicological Data on Ingredients: Petrolatum, white LD50: Not available. LC50: Not available.
| Classification | Semisolid |
| Signal Word | NA |
| Potential Acute Health Effects: | Slightly hazardous in case of eye contact (irritant), of ingestion, of inhalation |
| Potential Chronic Health Effects: | prolonged exposure is not known to aggravate medical condition. |
| Carcinogenic Effects: | Not available. |
| Mutagenic Effects: | Not Available |
| Teratogenic Effects: | Not available. |
| Developmental Toxicity: | Not available. |
| Skin Contact | Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. |
| Eyes Contact : | Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs. |
| Serious Skin Contact | Not Available |
| Inhalation: | If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
| Seroius Inhalation: | Not Applicable |
| Ingestion: | Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.. |
| Flammability of the Product: | May be combustible at high temperature. |
| Auto Ingition temp. | Not applicable |
| Flash Point | CLOSED CUP: 185°C (365°F) |
| Flammable Limits: | Not available |
| Products of Combustion: | Not Available |
| Fire Hazards in Presence of Various Substances: | Slightly flammable to flammable in presence of heat. |
| Explosion Hazards in Presence of Various Substances: | Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available. |
| Fire Fighting Media and Instructions: | SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet. |
| Special Remarks on Fire Hazards: | Not available. |
| Special Remarks on Explosion Hazards: | Not available. |
| Small Spillage | Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. |
| Large Spillage | Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. |
| Handling | Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not breathe dust. Keep away from incompatibles such as oxidizing agents. |
| Storage | Keep container tightly closed. Keep container in a cool, well-ventilated area. |
| Incompatibilities | Not Applicable |
| Engineering Control | Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. |
| Personal Protective Equipment | |
| Skin Protection |
Not normally needed during normal use. For situations in which prolonged skin contact is anticipated, double glove, using latex, nitrile, or rubber gloves. Check gloves for leaks. Wash hands before putting on gloves and after removing gloves. Gloves should cover the gown cuff. If necessary, refer to 29 CFR 1910.138. |
| Eye Protection | Not normally needed during normal use. If necessary, refer to 29 CFR 1910.133. |
| Respiratory Protection | A respirator is not required for routine conditions of use of this product. If respiratory protection is needed, use only respiratory protection authorized in the 29 CFR 1910.134. Oxygen levels below 19.5% are considered IDLH by OSHA. In such atmospheres, use of a full-facepiece pressure/demand SCBA or a full face-piece, supplied air respirator with auxiliary self-contained air supply is required under OSHA’s Respiratory Protection Standard (1910.134-1998). |
| Exposure Limits: | Not Available. |
Gloves Suit
| Appearance | Semisolid |
| Colour | White to faintly yellowish. |
| Taste | Practically tasteless. |
| Odor | Practically Odourless |
| pH (1 % Solution) @25°C | Not Applicable |
| Boiling Point | Not Available |
| Melting Point | 54°C (100.4°F) |
| Critical Temperature | Not Available |
| Specific Gravity | 0.820 - 0.865 @ 25 C.(Wter = 1) |
| Vapor Pressure | Not Applicable |
| Vapor Density (Air = 1.0) | Not Available |
| Volatility | Not Available |
| Odor Threshhold | Not Available |
| Water/Oil Dist. Coeff | Not Available |
| Ionicity (in Water) | Not Available |
| Solubility in Water | Insoluble |
| Stability...of..Product | The product is stable. |
| Instability Temperature | Not Available |
| Conditions of Instability: | Excess heat, incompatible materials |
| Incompatibility with various substances: | Slightly reactive to reactive with oxidizing agents. |
| Corrosivity: | Non-corrosive in presence of glass. |
| Special Remarks on Reactivity: | Not available. |
| Special Remarks on Corrosivity: | Not available. |
| Hazardous Polymerization | Will not occur. |
| Routes of Entry: | Ingestion. |
| Toxicity to Animals: | LD50: Not available. LC50: Not available. |
| Chronic Effects on Humans: | Not Available. |
| Other Toxic Effects on Humans: | Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation. |
| Special Remarks on Toxicity to Animals: | Not Available |
| Special Remarks on Chronic Effects onHumans: | Not Available |
| Special Remarks on other Toxic Effects on Humans: | Acute Potential Health Effects: Skin: May cause irritation. Low hazard for usual industrial handling. It does not readily penetrate the skin. Eyes: May cause mild eye irritation. Inhalation: Inhalation of mist or nebulized particles of this material may cause respiratory tract irritation. Symptoms may include coughing, breathing difficulty, and chest pain. Ingestion: Ingestion of large amounts may cause gastrointestinal tract irritation. Chronic Potential Health Effects: Skin: While petrolatum is regarded by some to be biologically inert and nonallergenic, there have some cases of allergic contact dermatits. Repeated skin contact with petrolatum induced changes at the cellular level in rabbits. Petrolatum was not a skin sensitizer in guinea pigs. |
| Ecotoxicity: | Not Available |
| BOD5 and COD: | Not Available |
| Products of Biodegradation: | Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. |
| Diaposal Condition | Waste must be disposed of in accordance with federal, state and local environmental control regulations. |
| DOT Classification: | Not a DOT controlled material (United States) |
| Identification: | Not applicable. |
| Special Provisions for Transport: | Not applicable. |
| Packing Group | Not applicable |
| Federal and State Regulations: | TSCA 8(b) inventory: Petrolatum, white |
| Other Regulations: | EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances. |
| Other Classifications: | Not controlled under WHMIS (Canada). |
| DSCL (EEC): | This product is not classified according to the EU regulations. S24/25- Avoid contact with skin and eyes. S28- After contact with skin, wash immediately with plenty of water S37- Wear suitable gloves. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
| HMIS Classification |
Health : 1, |
| NFPA Classification |
Health : 1 Flammability : 0 Reactivity : 0 |
| Protective Equipment | Gloves. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Safety glasses. |
|
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
