/ / / Oxytreat Scavanger Plus 210 Ltr

Shop

Oxytreat Scavanger Plus 210 Ltr

​ ​ ​

Oxygen Scavenger Plus is a catalysed liquid solution of Hydrazine and diethylhydroxylamine (DEHA). Its volatile properties ensure distribution throughout the boiler and condensate system, and hence protects against oxygen corrosion in all parts of the sy

SKU: RXSOL-50-5022-020 Category:

Description

Oxytreat Scavanger Plus is a catalysed liquid solution of Hydrazine and  diethylhydroxylamine (DEHA). Its volatile properties ensure distribution throughout the boiler and condensate system, and hence protects against oxygen corrosion in all parts of the system. The product also provides the required conditions for the establishment of a passivating layer of magnetite on all inner surfaces. RXSOL-50-5022-025 is a low toxicity product, suitable for high, medium and low pressure boiler systems.






Product Details

Application

RXSOL-50-5022-025 The objective is to maintain a hydrazine residual between 0.05-0.2 ppm depending on operating pressure and boiler designe. Actual consumption is determined under operating conditions. A normal dosage is approximately 1 ltr. per day, depending of system layout.

Hydrazine is a convenient reductant because the by-products are typically nitrogen gas and water. Thus, it is used as an ANTIOXIDANT, an oxygen scavenger, and a corrosion inhibitor in water boilers and heating systems. 

Hydrazine is mainly used as a foaming agent in preparing polymer foams 

TESTING PROCEDURE ::: http://rxmarine.com/hydrazine-test-kit

 

OXYTREAT OXYGEN SCAVENGER is a high-performance boiler water treatment chemical designed to rapidly remove dissolved oxygen from boiler feedwater and condensate systems. It minimizes oxygen-induced corrosion, extends equipment life, and promotes the formation of a protective magnetite layer on metal surfaces. Its volatile amine chemistry allows protection throughout the steam and condensate circuit. The product is suitable for low-, medium-, and high-pressure boiler systems and is compatible with most internal boiler treatment programs.

TEST METHOD ::: http://rxmarine.com/hydrazine-test-kit

Dosage & Procedure

Directions for use
This product is formulated for use in conjunction.Oxygen Scavenger Plus can be used in any boiler system, and in conjunction with mechanical deaeration systems. Removal of dissolved oxygen is vital for prevention of corrosion and especially pitting corrosion in boilers. When dosed into a boiler system, Oxygen Scavenger Plus will react with dissolved oxygen and form non corrosive compounds. The product is volatile, and left over product from oxygen scavenging in the pre-boiler section will evaporate and assist protection of the steam and condensate system. No solid materials are produced when using Oxygen Scavenger Plus.
 

Dosing method
Rx Marine International recommends continuously into the boiler feed line and Boiler Water Treatment Dosing Unit.
Dosing should be controlled so that the DEHA residual in the condensate is between 0.08-0,30 ppm. The consumption will depend on feed water temperature and the amount of water fed into the boiler. For more information about initial dosage and dose rate please consult your nearest Customer Centre.
Test result condensate PPM DEHA   
0.00 - 0.08 0.08 - 0.30 0.30 +
Increase dose 25% Maintain dose Decrease dose 25%

Sampling and testing
A representative sample of Condensate should be drawn for analysis daily. The sample should always be taken from the same sampling point, cooled and tested immediately By Rxsol Test Kit. It is important that regular testing is carried out, to ensure the correct level of treatment is maintained.
 

Technical Specifications

 

Product Specifications:

Density 

1

Packing, Type

PLASTIC

Volume

25 l

pH

10.5

Colour 

LIGHT YELLOW

Appearance

LIQUID

Directions for use
This product is formulated for use in conjunction.Oxygen Scavenger Plus can be used in any boiler system, and in conjunction with mechanical deaeration systems. Removal of dissolved oxygen is vital for prevention of corrosion and especially pitting corrosion in boilers. When dosed into a boiler system, Oxygen Scavenger Plus will react with dissolved oxygen and form non corrosive compounds. The product is volatile, and left over product from oxygen scavenging in the pre-boiler section will evaporate and assist protection of the steam and condensate system. No solid materials are produced when using Oxygen Scavenger Plus.
 

Dosing method
Rx Marine International recommends continuously into the boiler feed line and Boiler Water Treatment Dosing Unit.
Dosing should be controlled so that the DEHA residual in the condensate is between 0.08-0,30 ppm. The consumption will depend on feed water temperature and the amount of water fed into the boiler. For more information about initial dosage and dose rate please consult your nearest Customer Centre.
Test result condensate PPM DEHA   
0.00 - 0.08 0.08 - 0.30 0.30 +
Increase dose 25% Maintain dose Decrease dose 25%

Sampling and testing
A representative sample of Condensate should be drawn for analysis daily. The sample should always be taken from the same sampling point, cooled and tested immediately By Rxsol Test Kit. It is important that regular testing is carried out, to ensure the correct level of treatment is maintained.
 

Features
• Fast acting, liquid oxygen scavenger.
• Safe and easy to use, low toxicity.
• Reduces corrosion of iron and copper, increasing system life and reliability.
• Neutralises acids occurring in condensate system.
• Volatile product, provides distribution and protection throughout the boiler system, economical in use.
• Suitable for use in conjunction with combined and co-ordinated treatment programmes.
• Organic product, no dissolved solids added.
• Simple test to determine treatment level. 

Notes & Precautions

Features
• Fast acting, liquid oxygen scavenger.
• Safe and easy to use, low toxicity.
• Reduces corrosion of iron and copper, increasing system life and reliability.
• Neutralises acids occurring in condensate system.
• Volatile product, provides distribution and protection throughout the boiler system, economical in use.
• Suitable for use in conjunction with combined and co-ordinated treatment programmes.
• Organic product, no dissolved solids added.
• Simple test to determine treatment level. 

Generic / Chemical Name

Oxygen Remover

Supply Locations

Oxytreat Scavanger Plus manufacturer, exporter and supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Haldia, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Middle East UAE, Muscat Oman, Canada BC

Safety Data (MSDS)

Product Name : RXSOL-50-5022-025
Product Type : Oxytreat Scavanger Plus

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fuajairah, Muscat

Phone : +91 22 27815541 / 42
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

Chemical Name Concentration CAS Number EC Number R Phrases* Symbols 
Hydroquinone <1 123-31-9 204-617-8 22, 40, 41, 43, 50,68 Xn, N
Diethyl hydroxylamine85% 10-30 3710-84-7 223-055-4 10,20/21, 36/37/38  Xn
Hydrazine 10-15 302-01- 2      
Non classified ingredients

60-90

        

*See Section 16

Odour

Smells of ammonia

Appearance

Liquid, pale yellow, soluble in water

Contact with eyes

Causes irritation

Contact with skin

Causes irritation, Can be absorbed through skin, Harmful by inhalation and in contact with skin (R20/21)

Inhalation

Harmful by inhalation and in contact with skin (R20/21)

Ingestion

The ingestion of significant quantities may cause gastro-intestinal disturbances
Limited evidence of carcinogenic effect (R40)

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water. Seek medical attention if irritation persists. Contaminated clothing should be laundered before reuse.

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes. Obtain immediate medical attention.

Ingestion

Never make an unconscious person vomit or drink fluids. Do not induce vomiting.
Give 200-300mls (half point) water to drink. Obtain immediate medical attention.

Inhalation

Remove patient to fresh air. Keep warm and at rest. Seek medical attention if ill effects occur.

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45).

-   Non combustible
-   Nitrogen and carbon oxides may be formed
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

No special precautions are required for this product.

Clean Up Actions

Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete

Special Precautions

Wear protective clothing as per section 8.

Handling

Wear protective clothing as per section 8. Avoid contact with skin and eyes (S24/25). Eyewash bottles should be available.

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49)

Exposure Limits

TLV (TWA) 0.5 mg/m3 (Hydroquinone)

Exposure controls

No special precautions are required for this product

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended). Respiratory protection may be required under exceptional circumstances when excessive air contamination exists. Wear approved respirator if exposure likely to exceed MEL/OES.

 

Odour

Smells of ammonia

Appearance

Liquid, pale yellow, soluble in water

pH

10 - 11 at 100 % concentration, pH 8 - 9 at 1 % concentration

Boiling point

100 °C at 760 mm /Hg

Vapour pressure

not known

Vapor density

not known

Freezing point

0 °C at 760 mm/Hg

Completely soluble in water

 

Specific gravity (water=1)

0.98

Non combustible

 

-   This article is considered stable under normal conditions
-   Avoid overheating, Keep away from frost
-   Incompatible with oxidizing substances
-   See Section 5

Toxicological information

LD50 (oral,rat) >2100 mg/kg.LD50 (skin,rabbit) 1300 mg/kg.LC50 (inhalation,rat) 3140 mg/l/4h.(Diethylhydroxylamine)

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract

Contact with skin

Causes irritation

Contact with eyes

Causes irritation

Ingestion

May cause gastro-intestinal disturbances

Carcinogenicity

Hydroquinone: Category 3 Carcinogen Limited evidence of carcinogenic effect (R40)

Mutagenicity

Hydroquinone: Category 3 Mutagen

Ecotoxicity

May cause acute effects in the aquatic environment. This product contains components which are classified in the EU as dangerous for the environment

Mobility

Completely soluble in water

Persistence and Biodegradability

Degrades rapidly on exposure to air

Bioaccumulation Potential

Bioaccumulation of the components in this product is insignificant.

Other Adverse Effects

No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment.

Classification

EU Waste class: 07.01

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation

 -  Not classified as hazardous for transport

Classification and labeling

Contains Hydroquinone.  May produce an allergic reaction. 

Risk Phrases

Harmful by inhalation and in contact with skin (R20/21).Irritating to eyes, respiratory system and skin (R36/37/38)

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26).Wear suitable protective clothing, eye/face protection and gloves(S36/ 37/ 39).If swallowed seek medical advice immediately and show this container or label (S46).Avoid release to the environment. Refer to special instructions/Safety data sheets (S61)

Text of R and S phrase  codes  used  in  this  safety data sheet:-  R10: Flammable;  R20/21: Harmful by  inhalation and
in  contact  with  skin;  R22: Harmful   if   swallowed;  R36/37/38: Irritating   to  eyes,  respiratory system and  skin;  R40:
Limited evidence  of  carcinogenic e ffect;  R41: Risk of  serious  damage  to eyes;  R43:  May  cause  sensitisation  by
skin contact;  R50: Very toxic to aquatic organisms;  R68: Possible risk of irreversible effects.The information  provided
about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here  is based on current knowledge and experience.This  Safety Data  Sheet  describes the product  in  terms of safety  requirements  and  does not  signify  any  warranty   with  regard   to  the   product's   properties .The data given here   only  applies  when  product  used  for   proper   application(s) .  The  product  is  not  sold  as  suitable  for  other applications  -  usage  in   such   may  cause  risks  not    mentioned   in   this  sheet.  Do  not  use  for  other application n(s) without seeking advice from manufacturer This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive (67/548/EEC) This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directive (88/379/EEC) This Safety Data Sheet is provided in compliance with The Safety Data Sheets Directive (2001/58EC

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top