/ / / IRON ORE RUST REMOVER

Shop

IRON ORE RUST REMOVER

​ ​ ​

Excellent pre treatment and binder for metal surfaces to be painted. Concentrated blend of RXSOL proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface.

SKU: RXSOL-19-1388-500 Category:

Description

Iron Ore Cleaning Detergent

Iron Ore Cleaning Detergent is a specially formulated industrial cleaning chemical designed to remove dirt, dust, oil, grease, and other surface contaminants from iron ore, mining equipment, conveyors, hoppers, storage areas, and handling systems.
Iron Ore Red Dust Cleaner manufacturer, supplier and exporter. Iron Ore Red Dust Cleaner is advanced blend of non corrosive cleaner with additional base and inhibitor. Its powerful chemical rust removal action dissolves rust without any mechanical action. This is the reason why Iron Ore Red Dust Cleaner used in removal of iron ore stain without reaction on paint, rubber, plastic and glass. Iron Ore Red Dust Cleaner is frequently used in the mining and construction industry and also most commonly use to clean SHIP HOLD after disharging of IRON ORE.






Product Details

Application

Applications:

  • Iron ore handling and processing plants

  • Iron Ore Handling Ship Hold Bulk Carrier 

  • Mining equipment and machinery

  • Conveyor belts and transfer points

  • Hoppers, chutes, and loading areas

  • Storage yards and industrial floors

  • Trucks and material-handling equipment

Dosage & Procedure

Test Iron Ore Red Dust Cleaner on a small inconspicuous area before use.
Do not apply Iron Ore Red Dust Cleaner undiluted.
A more concentrate dilution may be required where concrete has been cured for an extended period of time.
Do not leave Iron Ore Red Dust Cleaner on any surface for extended periods of time.
To maintain product integrity, keep container sealed when not in use. 
 

Use 10 to 20% of Iron Ore Red Dust Cleaner with  fresh water and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet. Click for More details http://rxmarine.com/Iron-Ore-cleaning-direction

This is very effective chemical  for Iron ore and rust removal action. Which  dissolves Iron Ore rust from all kinds of surface.

If hardness contaminations remain repeat the process. Also cleaning property can be increase at temperature of 75 to 80 ‘C


Very effective products to removes rust and stains also improves metal appearance.

Direction for use

FOR HEAVY DUTY IRON ORE RUST REMOVER should be diluted  with water  1:4 . Then solution can be applied by brushing, spraying for  10 - 20 minutes the residues should be rinsed off thoroughly with high pressure  water.

Notes & Precautions

Key Benefits:

  • Removes oil, grease, and organic contamination

  • Helps clean dirt, dust, and accumulated deposits

  • Suitable for mining and mineral-processing environments

  • Helps improve the cleanliness of iron ore handling equipment

  • Effective for cleaning conveyors, machinery, floors, and loading areas

  • Can be used in manual, spray, or pressure-washing applications

Generic / Chemical Name

SHIP HOLD RUST CLEANING DETREGET

Supply Locations

IRON ORE RUST REMOVER manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of IRON ORE RUST REMOVER at a competitive price from us. We have ready stock of IRON ORE RUST REMOVER in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Safety Data (MSDS)

Product Name RXSOL-19-1388-500
Product Type IRON ORE RUST REMOVER

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Ethoxylated Fatty alcohol, Phosphoric Acid and Long chain Detergent  remaining which is not in the list of hazardous materials .

Human Health  Hazards    R 34 : Causes Burns
Keep away from food, children , animal .

Inhalation

No fumes but after inhalation medical attention require

Skin Contact

In case of contact with skin , wash immediately with plenty of water and soap   Remove contaminated clothes.

Eye Contact

Flush with running water for at least 15 minutes Immediately medical attention require.

Ingestion

Seek medical attention , try to drink more plenty of fresh water.

Non combustible product

Suitable 

Not known , on direct exposure to heat dangrous emission of gas of COx SOX  can be released

Not suitable

Not applicable 

Special  

Not applicable

Protection of fire Fighter

Not applicable  

Precaution for fire fighters   

Wear protective equipment with breathing apparatus.

Enviromental Precaution

Before flowing into drainage system, surface or ground water First of all neutralize with alkaline materials like lime powder for pH balancing between 6-10.

Cleaning Method

Flush Spill Area with Water and avoid contact with skin and eye.

Condition to Avoid    

Non flammable but avoid direct heating

Materials  to Avoid  

Do not subject to ALKALINE medium.

Handling

Keep Container Tightly Closed

NOTE :
Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to  water never add water to RXSOL.)

Personal protection:

Eye Protection   

Strictly wear eye protection

Hand protection

Wear PVC chemical resistance protective gloves

Appearance

Clear liquid

Density   

g/cm3 at 15°C: 1.5

pH  

10% solution 1.5-2.5

Flash Point

Not applicable

Compatibility  

 

Metal   

Concentrate and long touch may corrode.

Rubber 

No known effect

Decomposition Products: Do not occur hazard if stored and used as directed.  In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced. 
NOTE : AVOID CONTACT WITH ALKALINE SUBJECT.

Skin Irritation

Cause severe irritation

Eye Irritat

Cause severe irritation

Sensitization    

Cause Sensitizing

Chronic Toxicity  

Not Identified

Carcinogencity   

No

 RXSOL-16-1088-025 is degradable and due to highly acidic in nature must be neutralized as per guidance and ingridents used in it. 

As per guide line, Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required.

Transport over land ADR/RID

1805 8/11c 8/11c

Transport over inland waterways ADN/ADNR

 

Transport over sea IMDG

8

Transport by air ICAO/IATA

8/1805

Phosphoric acid

 

sea

EMS 8-08, MFAG 700 PG III

Classification and labelling according to 4. Novelle Gefahrstoff-Verordnung Symbols of danger :C Corrosive Ingredients : Phosphoric acid R-phrases :

R34

Use Hand gloves , Cause burns

S-phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S26

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S45

In case of accident or if you feel unwell, seek medical advice immediately

National prescriptions : Self classification on the basis of component assessments or analogy conclusions without addition/subtraction of points
for good/poor biodegradability etc.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe
our products from the point of view of safety requirements and is not intended to guarantee any particular properties.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top