/ / / Antifreeze Plus Corrosion Scale Inhibitor 25 Ltrs

Shop

Antifreeze Plus Corrosion Scale Inhibitor 25 Ltrs

​ ​ ​

It also contains non-toxic multi-metal inhibitors to protect chillers and their associated cooling systems against corrosion and scale in order to maximise heat transfer properties of the system. It should be diluted using ultra pure, demineralised, softene

SKU: RXSOL-16-4020-025 Category:

Description

Glycol antifreeze – corrosion & scale inhibitors

Antifreeze compound for cooling water systems , It is a  high quality effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and engines, against rust and corrosion. Its proper dose in cooling system gives full protection from corrosion.

It is biodegradable and does not have an environmental problem.

It also contains non-toxic multi-metal inhibitors to protect chillers and their associated cooling systems against corrosion and scale inorder to maximise heat transfer properties of the system. It should be diluted using ultrapure, demineralised, softened water.

An inhibited liquid coolant designed to protect against corrosion attack on base metals and also used to lower the freezing point of water






Product Details

Application

Solution Strength :
25 Ltrs RXSOL-16-4020-025 : 75 Ltrs Water gives freezing protection up to -140C  "or" 25% solution (1 part anti-freeze to 3 parts water)
For extra cold / winter climate , increase to a 33% solution (1 part anti-freeze to 2 parts water) to give freezing protection down to -170C.

Dosage & Procedure

EYES : Irrigate copiously with clean, fresh water for at least 15  minutes. Seek medical advice.
SKIN :  Wash  immediately  with  plenty  of  water.  Remove  contaminated   clothing.  If  irritation  persists  seek  medical attention.  Wash  contaminated  clothing  before  using  them.
INHALATION : Remove to fresh air. If breathing is irregular seek medical advice.
INGESTION :  Obtain  immediate  medical  attention.  Induce  vomiting  only  if indicated  by  the  doctor.  Never  give anything  by  mouth  to  an  unconscious  person.

Technical Specifications

Antifreeze Plus Corrosion Scale Inhibitor is heavy-duty  antifreeze and coolant build with corrosion ihibitor. Its  use  compatible with any heavy and light duty diesel or gas engines.
 
Specification :: 
 
Appearance : Clear Syrupy Liquid
pH  : 7 - 8.5
Freezing Point (50% Vol) : -35 ºC  to -37 ºC
Boiling Point : 195 ºC - 198ºC
Odour  : Characteristic
Specific Gravity  : 1.112 - 1.115
   

Notes & Precautions

Antifreezes have been proposed with consist of water-soluble alcohols as the chief nonaqueous ingredients plus anticorrosion agents containing 0.4 to 80% benzotriazole, its ammonium salt, or tetrabortate, or their mixtures. The amount of the agent in the antifreeze is sufficient to produce a concentration of about 0.01 to 2.0% benzotriazole or its salt and 0.5 to 3.0% of the weight of the water soluble alcohols.

Another antifreeze consists of a water-soluble alcohol, particularly ethylene glycol, and an agent containing 0.2 to 77% benzotriazole, its alkali metal or ammonium salt or their mixtures, or N-alkylbenzotriazole; 2.2 to 80% of an alkali metal arsenite, arsenate or molybdate or their mixtures; and 11 to 96% of a material which maintains the pH of the aqueous solution of the anticorrosion agent at about 7.5 to 10.5.  The anticorrosion agent is present in an amount sufficient to produce concentrations of 0.01 to 2.0% benzotriazole; 0.1 to 2.0% arsenite, arsenate, or molybdate; and 0.5 to 2.5% of the buffer.

Other corrosion inhibitors for ethylene glycol solutions have been proposed. For example, one contains 1 part phosphoric acid (density 1.75) and sufficient technical triethanolamine (usually about 3 parts by wt) added to 100 parts ethylene glycol to bring the pH of a 50% aqueous solution of the mixture to 7.2. The resulting composition shows less tendency to corrode metals than a corresponding composition in which the benzotriazole is replaced by 0.2 to 0.3 parts sodium mercaptobenzotriazole.

Supply Locations

Antifreeze Plus Corrosion Scale Inhibitor manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Antifreeze Plus Corrosion Scale Inhibitor at a competitive price from us. We have ready stock of Antifreeze Plus Corrosion Scale Inhibitor in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Safety Data (MSDS)

Product Name : RXSOL-16-4020-025
Product Type :  Antifreeze Plus Corrosion Scale Inhibitor

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Surat, Fujairah, Muscat

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

Chemical Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols

Blend of Glycol, ethanediol & Corrosion Inhibitor  

70-90 %

107-21-1

203-473-3       

R-22

 603-027-00-1
Xylene Polymer Derivative 10-15% Proprietroy Blend Mixture NA NA

Benzotriazole                               10- 15%
Mono Ethylene Glycol with corrosion scale and biological inhibitors  107-21-1    90 -100%  R22 Xn -Harmful if swallowed

*See Section 16

3.1  Substance/Preparation  Classification: This preparation  is dangerous  under  67/548/EEC  and  1999/45/EC  regulations  and  subsequent  amendments.  This preparate  requires  a  safety  data  sheet  according  to  the  91/155/EC  regulation  and  subsequent  amendments.  Further information on health and/or environmental hazards can be found in sections 11 and 12 of this sheet.Danger Symbols: Xn Phrases R: 22 3.2  Danger  Identification HARMFUL IF SWALLOWED

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Seek medical advice 

Ingestion

Never give anything by mouth to an unconscious person. Give plenty of water to drink. Seek medical advice if necessary

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. Remove patient to fresh air

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

-  Carbon oxides may be formed
-  Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

No special precautions are required for this product.

Immediate Actions

Shut off source of leak if safe to do so.

Clean Up Actions

Absorb spillage in suitable inert material.Flush spill area with copious amounts of water.

Special Precautions

Wear protective clothing as per section 8.

Handling

The usual precautions for handling chemicals should be observed. Eyewash bottles should be available

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49). Protect from frost

 Exposure Limits

There are no recommended or established controls for this product

 Exposure controls

No special ventilation is required unless the product is used in a spray form

Occupational exposure controls

No respiratory protection is required unless subject to contact with substance mist. Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended

Odour

Characteristic

Appearance

Liquid,  soluble in water

pH

7.5 at 100 % concentration

Boiling point

NA

Vapour  density

N.A

Melting point

36iC

Completely soluble in water

Specific gravity (water=1)

1.15

The product is stable in normal conditions of use and storage. Due to thermal decomposition or in  the  event  of  a  fire vapours  may  be  produced  potentially  dangerous  to  health.Ethylene glycol may absorb moisture from the atmosphere up to twice its own weight.

Acute  effects

ingestion  of  this  product  is harmful.  Even   small  amounts  of  product  may cause  serious  health problems  (stomach  pain,  nausea,  sickness,  diarrhoea,  etc.).  This  product  may  slightly  irritate  mucosas,  the  upper. respiratory  tract,  eyes,  and  skin.  Exposure  symptoms  may include:  sting,  cough,  asthma,  laryngitis,  respiratory. disorders,  headache,  nausea  and  sickness

Ethylene  glycol

following  ingestion  it initially  stimulates  the  CNS;  later  on  depression  results.  Renal  damage  with anuria  and  uremia  may occur.   Symptoms  of  over  exposure  are:  vomiting,  somnolence,  difficulty  in   breathing,convulsions. The lethal dose in man is approximately 1.4 l/kg. The route of entry is inhalation and ingestion.

Use this  product  according  to  good  working  practices.  Avoid  litter.  Inform  the  competent  authorities,  should  the product reach waterways or sewers or contaminate soil or vegetation. Ethylene  glycol  is  biodegradable

Consider  the  possibility  of  burning  the  product  in  a  suitable  inceneritor.   Acid  or  basic  products  must  always  be neutralized  before  undergoing  any   treatment,  including  biological  treatment  whenever  feasible.  If   the  waste  is solid,it can be disposed of in a landfill.

This substance is not dangerous under current provisions of the Code of International Carriage of  Dangerous  Goods by  Road  (ADR)  and  by  Rail  (RID),  of  the  International  Maritime  Dangerous  Goods  Code  (IMDG),  and  of  the International Air Transport Association (IATA) regulations.

R-22 HARMFUL IF SWALLOWED Danger  labelling  under  regulations  67/548/CEE  and  1999/45/CE  and  following  amendments  and  adjustments.Workers exposed to this chemical agent must undergo health checks according to regulation 98/24/CE.

R22 HARMFUL IF SWALLOWED.
GENERAL BIBLIOGRAPHY
1. Regulation 1999/45/CE and following amendments;
2. Regulation 67/548/CEE and following amendments and adjustments (technical adjustment XXVIII);
3. Regulation 91/155/CEE and following amendments;
4. The Merck Index. - 10th Edition;
5. Handling Chemical Safety;
6. Niosh - Registry of Toxic Effects of Chemical Substances;
7. INRS - Fiche Toxicologique (toxicological sheet);
8. Patty - Industrial Hygiene and Toxicology;
9. N.I. Sax-Dangerous properties of Industrial Materials-7, 1989 Edition.
Note for users:The information contained in the present sheet are based on our own knowledge on the date of the
last version.Users must verify the suitability and thoroughness of provided information according to each specific use of the Product.This document must not de regarded as a guarantee on any specific product property.The use of this product is not subject to our direct control; therefore, users must, under their own responsibility,comply with the current health and safety laws and regulations. The producer is relieved from any liability arising from improper uses.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top