Shop

It has a salty taste, but you cannot smell any odor. Calcium chloride is soluble in water and composed of calcium and chlorine.

Product Specification

Calcium chloride also used as ice melter. We are one of quality product calcium chloride suppliers and ice melt distributors of ­­­­­­­Calcium Chloride on the Europe, east coast, US States and Canada. We are a keeping ready stock of Calcium Chloride flake and pellets.

We bring high-grade Calcium Chloride from reliable and authentic sources of the market. The powder is an ionic compound prepared by chemical reaction of chlorine and calcium. Moreover, it is a deliquescent compound which can dissolve in water very well. Formulated using high grade base material, it is widely used in several processes and operations related to industrial applications.

Calcium Chloride aggressively absorbs moisture from the air, first causing a swelling of the crystals. If the air is humid enough and the temperature is high enough, the crystals melt and liquid saline solution brine) is formed.

It works well over a temperature range from freezing up to 100C or more. At low temperature the salt does not absorb moisture under dry conditions. In practical terms calcium chloride desiccants are effective at Relative Humidity above 20-30%, but are relatively more effective under moist conditions. 

Calcium chloride  also can be used to accelerate strength development in mass concrete during winter. RX MARINE INTERNATIONAL is largest stockist and exporter of Calcium Chloride from India and Middle East.

Calcium Chloride supplier in Mumbai, Kandla, Kolkata, Vizag, Chennai, Fujairah, Sharjah, Abudhabi, Dubai.

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Points: Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, Fujairah, Muscat, Kenya, Canada

HEALTH HAZARDS, GENERAL:Particulates may cause mechanical irritation to the eyes, nose, throat and lungs. Particulate inhalation may lead to pulmonary fibrosis, chronic bronchitis, emphysema and bronchial asthma. Dermatitis and asthma may result from short contact periods.

INHALATION: Irritating to the respiratory tract if inhaled.

GENERAL: Persons seeking medical attention should carry a copy of this MSDS with them.

INHALATION: Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Get medical attention.

INGESTION: Drink a couple of glasses water or milk. Do not give victim anything to drink of he is unconscious. Get medical attention.

SKIN: Wash skin thoroughly with soap and water. Remove contaminated clothing. Get medical attention if any discomfort continues.

EYES: Promptly wash eyes with lots of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.

FLAMMABILITY LIMIT - LOWER(%): N/D

FLAMMABILITY LIMIT - UPPER(%): N/D

EXTINGUISHING MEDIA: Use extinguishing media appropriate for surrounding fire. Carbon dioxide (CO2). Dry chemicals. Foam. Water spray, fog or mist.

SPECIAL FIRE FIGHTING PROCEDURES: No specific fire fighting procedure given.

UNUSUAL FIRE & EXPLOSION HAZARDS: No unusual fire or explosion hazards noted.

HAZARDOUS COMBUSTION PRODUCTS: This material is not combustible. No specific hazardous combustion products noted

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Ventilate area of leak or spill. Wear personal protective equipment as specified in section 8. Spills: sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water.

HANDLING: Handle all chemicals with care.
STORAGE: Store at moderate temperatures in dry, well ventilated area. Keep in original container

INGREDIENT COMMENTS: No exposure limits noted for ingredient(s). Exposure limits are for Particulates Not Otherwise Classified (PNOC).

PROTECTIVE EQUIPMENT:

ENGINEERING CONTROLS: Use appropriate engineering controls such as, exhaust ventilation and process enclosure, to reduce air contamination and keep worker exposure below the applicable limits.

VENTILATION: Supply natural or mechanical ventilation adequate to exhaust airborne product and keep exposures below the applicable limits.

RESPIRATORS: Use at least a NIOSH-approved N95 half-mask disposable or reuseable particulate respirator. In work environments containing oil mist/aerosol use at least a NIOSH-approved P95 half-mask disposable or reuseable particulate respirator.

PROTECTIVE GLOVES: Use suitable protective gloves if risk of skin contact.

EYE PROTECTION: Wear dust resistant safety goggles where there is danger of eye contact.

PROTECTIVE CLOTHING: Wear appropriate clothing to prevent repeated or prolonged skin contact.

HYGIENIC WORK PRACTICES: Wash promptly with soap and water if skin becomes contaminated. Change work clothing daily if there is any possibility of contamination. 

APPEARANCE/PHYSICAL STATE: Powder, dust.

COLOR: White.

ODOR: Odorless or no characteristic odor.

SOLUBILITY DESCRIPTION: Very soluble in water.

SOLUBILITY VALUE (g/100g H2O 68°F): 75

DENSITY/SPECIFIC GRAVITY (g/ml): 2.2

TEMPERATURE (°F): 68

VAPOR DENSITY (air=1): N/D

VAPOR PRESSURE: N/D

TEMPERATURE (°F):

pH-VALUE, DILUTED SOLUTION: N/D CONCENTRATION (%,M)

STABILITY: Normally stable.

CONDITIONS TO AVOID: Avoid contact with water.

HAZARDOUS POLYMERIZATION: Will not polymerize.

POLYMERIZATION DESCRIPTION: Not relevant.

MATERIALS TO AVOID: Sulfuric acid

HAZARDOUS DECOMPOSITION PRODUCTS: No specific hazardous decomposition products noted.

(NON-BULK SHIPMENTS)

 (BULK SHIPMENTS)

US FEDERAL REGULATIONS:

WASTE CLASSIFICATION: Not a hazardous waste by U.S. RCRA criteria. See Section 13. REGULATORY STATUS: This Product or its components, if a mixture, is subject to following regulations (Not meant to be all inclusive - selected regulations represented): SECTION 313: This product does not contain toxic chemical subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR Part 372. SARA 311 Categories: 1: Immediate (Acute) Health Effects. The components of this product are listed on or are exempt from the following international chemical registries: TSCA (U.S.) DSL (Canada) EINECS (Europe)

STATE REGULATIONS: STATE REGULATORY STATUS: This product or its components, if a mixture, is subject to following regulations (Not meant to be all inclusive - selected regulations represented):. None.

PROPOSITION 65: This product does not contain chemicals considered by the State of California's Safe Drinking Water and Toxic Enforcement Act of 1986 as causing cancer or reproductive toxicity, and for which warnings are now required.

CANADIAN REGULATIONS:

LABELS FOR SUPPLY:

REGULATORY STATUS: This Material Safety Data Sheet has been prepared in compilance with the Controled Product Regulations. Canadian WHMIS Classification: D2B - Other Toxic Effects: Toxic Material

Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37:Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.