Description
It is a blend of organic compound along with Glycol and 3 to 15% benzotriazole is especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life.
Coolant Fluid
Inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and
Product Details
Application
APPLICATION :
At concentration of 10% by volume,RXSOL-40-4004 affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.
PHYSICAL DATA
Appearance : Clear liquid
Density : 1.096 g/cm3
Product pH neat: 9.5
Corrosive action: None
Dosage & Procedure
The coolant should be prepared with water that is clean but not too hard water. The following types of water are unsuitable: sea water,mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the
following limits:
Water hardness : 0 - 100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.
Technical Specifications
Coolant works as heat exchanger with with prompt excellent heat transfer. Keeping Engine cool enhance the engine life. And the corrosion inhibitors present in coolant protect the component parts of engine.
Notes & Precautions
One of popular coolant manufacturer and supplier in UAE - GULF and OMAN. Coolant also most commonly used as Antifreeze liquid. Principal and mechanism behind Engine coolant is used to remove heat produced by the engine and transfer it into the cooling system.
Active Matter
60-70
Generic / Chemical Name
Engine Temperature control fluid / Liquid
Areas of Use
| Freezing Point °F | % Glycol (by vol.) | Product / Concentration | Boiling Temp. °F |
|---|---|---|---|
| 25 | 10 | 10% Glycol Solution | 214 |
| 16 | 20 | 20% Glycol Solution | 216 |
| 3 | 30 | RXSOL Coolant-30 | 220 |
| -13 | 40 | 40% Glycol Solution | 222 |
| -35 | 50 | RXSOL Coolant-50 | 225 |
| -55 | 60 | 60% Glycol Solution | 230 |
| < -60 | 70 | 70% Glycol Solution | 242 |
| -49 | 80 | 80% Glycol Solution | 255 |
| -21 | 90 | 90% Glycol Solution | 285 |
| 8 | 100 | RXSOL Coolant Concentrate | 387 |
Supply Locations
Coolant thermic fluid manufacturer, exporter and supplier in Mumbai, Chennai, Gandhidham, visakhapatnam, Kolkata, Barka - Muscat - Oman, Fujairah, Dubai, Sharjah, Ajman, Abudhabi - UAE - Middle East.
COOLANT Manufcaturer and supplier in INDIA - UAE MIDDLE EAST GULF, OMAN, Nairobi Kenya, Sudan, Yemen. RXSOL COOLANT RXSOL-40-4004-025 exporter and supplier in Mumbai, Surat, Gandhidham, Kolkata, Chennai, Vizag Visakhapatnam, Paradip, Fujairah, Ajman, Abudhabi, Sharjah, Dubai, RUWI, Barka, Muscat, Sohar, Oman, Canada
Industry Applications
Coolant not only keep safe engine by protecting your engine from freezing but also keeping parts component free from corrosion.
Safety Data (MSDS)
| Product Name | RXSOL-40-4004-210 |
| Product Type | COOLANT- 210 Ltr |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Barka-Muscat, Fujairah - UAE, Muscat, Nairobi
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
|
Ethylene Glycol |
40-50% |
107-21-1 |
60 - 65 |
| Triethanol Amine Phosphate | 1.5-2-5 | 102-71-6 | 203-049-8 |
| Sodium Mercaptobenzothiazole | 0.15 to 0.20 | 2492-26-4 | 219-660-8 |
| BenzoTriazole | 0.5 -1 | 95-14-7 | 202-394-1 |
| Proprietory Blend | 30 - 40 | -------------------- | .................. |
Benzotriazole is especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers.
This could aid service life.
*See Section 16
|
Odour |
Characteristic odour |
|
Appearance |
Liquid, Slight yellow, soluble in water |
|
Contact with eyes |
Causes irritation |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Inhalation |
None |
|
Ingestion |
None |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary. |
|
Contact with eyes |
If substance has got into eyes, immediately washout with plenty of water for at least 15 minutes Obtain immediate medical attention. |
|
Ingestion |
Never give anything by mouth to anunconscious person Give plenty of water to drink Obtain immediate medical attention. |
|
Inhalation |
Remove patient to fresh air Keep warm and at rest, inahalfup right position. Loos enclothing Seek medical attention if irritation persists. |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately(show the label where possible)(S45). |
-*See Section16
- Smoke from fires is irritating
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Personal Precautions |
Wear protective clothing as persection 8 |
|
Environmental Precautions |
No special precautions are required for this produc |
|
Immediate Actions |
Shut off source of leak if safe to do so |
|
Clean Up Actions |
Absorb spillagein inert material and shovel up Flush spill area with copious amounts of water |
|
Special Precautions |
Wear protective clothing as persection 8 |
|
Handling |
The usual precautions for handling chemicals should be observed Eye wash bottles should be available |
|
Storage |
Keep only in the original container in a cool, well ventilated place(S3/9/49) Protect from frost |
|
Exposure Limits |
There are no recommended or established controls for this product |
|
Exposure controls |
No special ventilation is required unless the product is used in as pray form |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves(plastic or rubber are recommended) No respiratory protection is required unless subject to contact with substance mist |
|
Odour |
Characteristic odour |
|
Appearance |
Liquid, Slight yellow/green, soluble in water |
|
pH |
7.5-8.5at 5-10%concentration |
|
Boilingpoint |
>230°F |
|
Vapour pressure |
not known |
|
Freezing point |
Anti Freezing Liquid |
|
Completely soluble in water |
|
|
Specific gravity(water=1) |
1.07 |
-This article is considered stable under normal conditions
-See Section 5
|
Toxicological information |
No experimental data available |
|
Inhalation |
None |
|
Contact with skin |
Reddening Skin |
|
Contact with eyes |
Reddening Eyes |
|
Ingestion |
None |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Ecotoxicity |
This product does not contain ingredients which are classified in the EUas dangerous for the environment. Mobility Completely soluble in water |
|
Persistence and Biodegradability |
Its mainingredients will either dissolve rapidly and dissociate in water or are readily /inherently biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is in significant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used/ handled correctly. |
|
Mobility |
Completely soluble in water |
|
Classification |
This material and/or its container must be disposed of as hazardous waste EUWaste class |
|
Disposal considerations |
Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
|
Risk Phrases |
Irritating to eyes(R36) |
|
Safety Phrases |
In case of contact with eyes, rinse immediately with plenty of water and seek medic aladvice(S26) Wear suitable gloves and eye/face protection(S37/39) |
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes.The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold assuitable for other applications-usage in such may cause risks not mentioned in this sheet. Donot use for other application(s) with out seeking advice from manufacturer This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive(67/548/EEC) This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directive(88/379/EEC) This Safety Data Sheet is provided in compliance with The Safety Data Sheets Directive(2001/58EC)
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
| 202-394-1 |
| 202-394-1 |
