Shop

• All types of reinforced concrete, including precast/prestressed and post-tensioned applications
• Parking garages, bridge decks, marine structures, slabs, floors and other reinforced concrete applications requiring corrosion protection against chlorides from de-icing salts or marine exposure

Usage Guideline

Corrosion-Inhibiting System: In order to control corrosion in reinforced concrete, the ACI 318 (ACI 318M) Building Code Requirements for Structural Concrete and Commentary requires certain design considerations, such as limiting the water-cementitious materials ratio, providing adequate concrete cover over reinforcing steel and limiting the initial chloride ion content of the concrete. Additionally, construction practices should be such that a dense, void-free concrete is
obtained.

In addition to the elements of good concrete practice required by the ACI 318 (ACI 318M), RXSOL  recommends a corrosion-inhibiting system that inhibits corrosion at multiple levels for maximum protection. The use of MasterLife RXSOL CIA 222 admixture restricts the ingress of chlorides and moisture and additionally slows the onset and rate of corrosion by forming a protective film on the reinforcing steel. Additional protection can be attained through the use of a high-range water-reducing admixture such as  RXSOL admixture to provide adequate placability and consolidation at low water-cementitious materials ratios and/or the use of silica fume to further reduce concrete permeability.

Dosage:

 RXSOL CIA  222 admixture is recommended for use at a dosage of 1 gal/yd3 (5 L/m3) of concrete for all applications and corrosive environments. RXSOL CIA  222 admixture dosed at 1 gal/yd3 (5 L/m3) is formulated to provide optimum corrosion protection of reinforced concrete structures in severe corrosive environments, and, therefore provides excellent corrosion protection in less severe corrosion environments as well. RXSOL CIA  222 admixture is recommended for use at a single dosage in order to eliminate the confusion and uncertainties related to determining the severity of a corrosive environment and predicting the chloride exposure of the structure. Mixing: RXSOL CIA  222  admixture may be added with concrete batch water. It should not be mixed with any other admixtures prior to being introduced into the concrete mixer. Depending on local materials, mixing efficiency and other conditions, the use of this admixture may require changes in normal batching procedures to facilitate air entrainment.

Performance Characteristics

Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.

Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with  RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of  RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of  RXSOL CIA 222.

Slump and Temperature Development:  RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.

Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by  RXSOL CIA 222.

Product Notes

Corrosivity – Non-Chloride, Non-Corrosive: RXSOL CIA 222  admixture is a corrosion-inhibiting admixture and will neither initiate nor promote corrosion of reinforcing and prestressing steel embedded in concrete, or of galvanized steel floor and roof systems. Neither calcium chloride nor other  chloride-based ingredients are used in the manufacture of RXSOL CIA 222  

Features :
 

• Inhibits corrosion at its most critical points
• Reduces the rate at which chlorides and moisture enter the concrete
• Adsorbs onto the reinforcing steel to form a corrosion-resistant protective film

Benefits

• Extended service life of reinforced concrete structures
• Premium corrosion protection by slowing the ingress of chlorides and moisture into the concrete and forming a strong, durable protective film on the reinforcing steel
• Effective in cracked concrete where the elements that cause corrosion have direct access to the reinforcing steel
• Increased sulfate resistance
• Normal set product that is easily used in elevated temperatures
   

Storage and Handling

Storage Temperature: Store at ambient temperatures above 35 °F (2 °C) but not exceeding 125 °F (52 °C). Precautions should be taken to protect RXSOL CIA 222 from freezing. If product freezes, thaw and reconstitute by mild mechanical agitation. Do not use pressurized air for agitation.

Shelf Life: RXSOL CIA 222 has a minimum shelf life of 9 months. Depending on storage conditions, the shelf life may be greater than stated. Please contact your local sales representative regarding suitability for use and dosage recommendations if the shelfRXSOL CIA 222  has been exceeded.

Packaging :
RXSOL CIA 222 is available in 210 Ltr  drums, 1000 Ltr  totes, and by bulk delivery.

Additional Information :
For additional information on RXSOL CIA 222  or its use in developing a concrete mixture with special performance characteristics, contact your local sales
representative.
RXSOL CHEMO PHARMA INTERNATIONAL is a global leader of innovative chemistry systems and formulations for construction, maintenance, repair and restoration of structures. The Admixture Systems business provides advanced products, solutions and expertise that improve durability, water resistance, energy efficiency, safety, sustainability and aesthetics of concrete structures, above and below ground, helping customers to achieve reduced operating costs, improved efficiency and enhanced finished products.

Corrosion Inhibiting Admixture CIA 222 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Corrosion Inhibiting Admixture CIA 222 at a competitive price from us. We have ready stock of Corrosion Inhibiting Admixture CIA 222 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Description ::

Application :

Performance Characteristics

Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.

Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with  RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of  RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of  RXSOL CIA 222.

Slump and Temperature Development:  RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.

Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by  RXSOL CIA 222.

Usage Guideline

Corrosion-Inhibiting System: In order to control corrosion in reinforced concrete, the ACI 318 (ACI 318M) Building Code Requirements for Structural Concrete and Commentary requires certain design considerations, such as limiting the water-cementitious materials ratio, providing adequate concrete cover over reinforcing steel and limiting the initial chloride ion content of the concrete. Additionally, construction practices should be such that a dense, void-free concrete is
obtained.

In addition to the elements of good concrete practice required by the ACI 318 (ACI 318M), RXSOL  recommends a corrosion-inhibiting system that inhibits corrosion at multiple levels for maximum protection. The use of MasterLife RXSOL CIA 222 admixture restricts the ingress of chlorides and moisture and additionally slows the onset and rate of corrosion by forming a protective film on the reinforcing steel. Additional protection can be attained through the use of a high-range water-reducing admixture such as  RXSOL admixture to provide adequate placability and consolidation at low water-cementitious materials ratios and/or the use of silica fume to further reduce concrete permeability.

Dosage:

 RXSOL CIA  222 admixture is recommended for use at a dosage of 1 gal/yd3 (5 L/m3) of concrete for all applications and corrosive environments. RXSOL CIA  222 admixture dosed at 1 gal/yd3 (5 L/m3) is formulated to provide optimum corrosion protection of reinforced concrete structures in severe corrosive environments, and, therefore provides excellent corrosion protection in less severe corrosion environments as well. RXSOL CIA  222 admixture is recommended for use at a single dosage in order to eliminate the confusion and uncertainties related to determining the severity of a corrosive environment and predicting the chloride exposure of the structure. Mixing: RXSOL CIA  222  admixture may be added with concrete batch water. It should not be mixed with any other admixtures prior to being introduced into the concrete mixer. Depending on local materials, mixing efficiency and other conditions, the use of this admixture may require changes in normal batching procedures to facilitate air entrainment.

Product Notes

Corrosivity – Non-Chloride, Non-Corrosive: RXSOL CIA 222  admixture is a corrosion-inhibiting admixture and will neither initiate nor promote corrosion of reinforcing and prestressing steel embedded in concrete, or of galvanized steel floor and roof systems. Neither calcium chloride nor other  chloride-based ingredients are used in the manufacture of RXSOL CIA 222  

Storage and Handling :

Storage Temperature: Store at ambient temperatures above 35 °F (2 °C) but not exceeding 125 °F (52 °C). Precautions should be taken to protect RXSOL CIA 222 from freezing. If product freezes, thaw and reconstitute by mild mechanical agitation. Do not use pressurized air for agitation.

Shelf Life: RXSOL CIA 222 has a minimum shelf life of 9 months. Depending on storage conditions, the shelf life may be greater than stated. Please contact your local sales representative regarding suitability for use and dosage recommendations if the shelfRXSOL CIA 222  has been exceeded.

Packaging : RXSOL CIA 222 is available in 210 Ltr  drums, 1000 Ltr  totes, and by bulk delivery.

Additional Information :

For additional information on RXSOL CIA 222  or its use in developing a concrete mixture with special performance characteristics, contact your local sales
representative.
RXSOL CHEMO PHARMA INTERNATIONAL is a global leader of innovative chemistry systems and formulations for construction, maintenance, repair and restoration of structures. The Admixture Systems business provides advanced products, solutions and expertise that improve durability, water resistance, energy efficiency, safety, sustainability and aesthetics of concrete structures, above and below ground, helping customers to achieve reduced operating costs, improved efficiency and enhanced finished products.

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

STOCK Point : Mumbai, Kandla, Kolkata, Chennai, Fujairah, Muscat, Kenya, Canada

Proprietary blend of polycarboxylate amines and stabilizers.

Hazard description:
Information concerning particular hazards for human and environment:
R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R 34 Causes burns.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: Mouth respiratory protective device.

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection:
Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralizing agent. Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.

Handling:
Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.

Additional information about design of technical facilities: No further data; see item 7.

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Must not reach sewage water or drainage ditch undiluted or unneutralized.

Product:
Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
Risk phrases:
20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
34 Causes burns.
Safety phrases:
1/2 Keep locked up and out of the reach of children.
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.