/ / / Filter Cleaner Engine Oil

Shop

Filter Cleaner Engine Oil

​ ​ ​

Specialized to remove carbonized oils deposits and prevent coke-like deposits from engine equipment. Very usefull to clean fuels recipitation of paraffin and asphalt or with lubricating oils which can form solid encrustations on the mesh.

SKU: RXSOL-16-1095-025 Category:

Description

Very usefull to clean Fuels precipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1095-025 followed by blasting with compressed air using a cleaning gun.






Product Details

Application

Mechanical cleaning (scrubbing and brushing )damages the filter which results in poor performance .

Cleaning process and requirement of time  depends on the type of the contamination. With fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.

RXSOL-16-1095-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
MESH CONTAMINATED WITH HEAVY OIL:

Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by high pressure Cleaning Device using RXSOL-16-1095-025 solution.


INSTRUCTIONS FOR USE:
Use of RXSOL-16-1095-025 is not restricted to a particular method of cleaning. Depending on the operating conditions, RXSOL-16-1095-025 can be used in a dip bath, in a spraying plant, in steam jetting or in manual application using a cloth, brush or sponge. It can be used warm or cold. RXSOL-16-1095-025 is miscible with water - even seawater.

Concentration for mesh cleaning: 1 : 2,5
Temperature: up to a maximum of 60 °C

The concentration depends on the type and thickness of the adhesive substance to be removed. When used in concentration below 1 : 30 rinsing is usually not required. No visible film remains on the surface

Dosage & Procedure

May be used directly or diluted in the ratio of 1 part concentrate to 5 parts water, ( or 1 . Ratio of any solvent like diesel )

Manual Cleaning of the Candle Filter Elements

NOTE ::: Drained the automatic filter by automatic back-flushing (i.e. all filter chambers).
1 Then soak the filter element assembly, with the openings of the candle elements facing down in a suitable tank filled with RXSOL-16-1095-025 solvent.

2 The soaking time is completely depends on cleaning method :
a)In cold RXSOL-16-1095-025 cleaner the maximum soaking time is 24 hours.
b)In hot solution the maximum soaking time is 12 hours.


3. After soaking remove the whole filter element assembly from the tank and for dry to keep all parts on place it on a suitable perforated sheet metal.

4. Then you may blow compressed air through the candles from the inside to the outside.

5. After this procedure the complete filter element assembly should be immersed in fresh cleaner, with the candle element opening down-wards, and rinsed through with an up and down motion.

6 Allow the filter element assembly to drain again and dry it by blowing compressed air through it again from the inside to the outside. The manual cleaning procedure described here has produced adequate results (ca. 60 % clean) in similar applications.

Note : CLEANING of filter can be enhance with high pressure machine.

 

Technical Specifications

RXSOL-16-1095-025  is a fluid cleaning and degreasing agent with a wide range of application. It can be used for practically all cleaning and degreasing purposes.
RXSOL-16-1095-025 cleans rapidly, thoroughly and extremely economically.
Use of RXSOL-16-1095-025 renders safety precautions superfluous.
RXSOL-16-1095-025 has these outstanding characteristics without exhibiting the
isadvantages of solvent cleaners.

RXSOL-16-1095-025 is non-flammable and free from caustic

This product is biologically degradable

RXSOL-16-1095-025  can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.

Active Matter

98 - 99%

Generic / Chemical Name

Effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators

Supply Locations

Filter Cleaner Engine Oil supplier in Mumbai, Nhava seva,  Kandla, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata - Haldia - Paradip, Fujairah, Abu Dhabi, Sharjah, Dubai, Barka Oman Muscat, Canada

Industry Applications

Filter Cleaner Engine Oil specially formulated for cleaning of lube and fuel filters, machinery parts and tools. Filter Cleaner Engine Oil  powerful cleaning action makes it no1 marine cleaner in engine oil cleaning operation.
 

HOW TO USE Filter CLEANER?
 
For maintaining optimal engine performance Cleaning o reusable lube oil filter is very important. Proper maintenance and cleaning of FILTER also increasing lifespan of ENGINE.
 
 
1st of all Ensure the engine is off and keep soft bristle brush, compressed air (if available), and protective gloves.​

Then Remove by unscrewing the Oil Filter from circulating system then completely Drain Oil: Place a drain pan beneath the oil filter to catch any residual oil.​
 
 
2nd Cleaning the Filter Element:
 
Apply Cleaner: Spray the cleaning agent onto both sides of the filter element, focusing on the dirty side.​
 
Soak: Allow the cleaner to penetrate for about 10 minutes to loosen contaminants.​
 
Rinse: Rinse the filter with low-pressure water from the clean side out to flush out debris.​
 
Brush: For stubborn debris, gently use a soft-bristle brush to dislodge particles from the filter surface.​
 

3. Drying the Filter: Use air compressor to remove excess of  chemical liquid and moisture and  then keep FILTER to dry fully.
 
4. Reinstall Filter: Screw the filter back into place, ensuring it's securely tightened.​

5. After Cleaning Steps: Refill Oil: Replace any lost oil to maintain the correct oil level.​

NOTE : Regularly cleaning your reusable oil filter ensures efficient filtration and contributes to the longevity of your engine. Always consult your equipment's manual for specific instructions related to your model.​

Safety Data (MSDS)

Product Name RXSOL-16-1095-025
Product Type FILTER CLEANER , HD.

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

STOCK POINT ::: Kandla, Mumbai, Visakhapatnam, Chennai, Kolkata, Fujairah

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Chemical Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols

Proprietary Ratio

10-30

7664-38-2

231-633-2

34

C 

2-2 (Butoxyethoxy) ethanol

1-5

112-34-5

203-961-6

36

 Xi

Non classified ingredients

60 - 90

 

 

 

 

*See Section 16

Odour

Odourless

Appearance

Liquid, pale yellow, soluble in water

Contact with eyes

Can cause damage to the eyes

Contact with skin

Causes burns (R34)

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract, Can cause damage to the lungs

Ingestion

The ingestion of significant quantities may cause damage to digestive system

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash  with  soap and water Seek medical attention if irritation persists

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Seek immediate medical attention

Ingestion

Do not induce vomiting Give plenty of water to drink Never give anything by mouth to an unconscious person Seek immediate medical attention  

Inhalation

Inhalation is unlikely to occur Remove patient to fresh air Never give anything by mouth to an unconscious person Give plenty of water to drink Obtain immediate medical attention

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

-  Non combustible
-  Smoke from fires is corrosive, Decomposition products may include phosphorous compounds
-  Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-  Smoke from fires is corrosive. Take precautions to protect personnel from exposure

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

No special precautions are required for this product.

Immediate Actions

Shut off source of leak if safe to do so Use appropriate containment to avoid environmental contamination (S57)

Clean Up Actions

Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete

Special Precautions

Wear protective clothing as per section 8 Do not use metal containers for spilled liquid

Handling

Wear protective clothing as per section 8 Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49)

Exposure Limits

OES / LTEL 0.2 ppm  1 mg/m3 (Posphoric acid)

Exposure controls

No special ventilation is required unless the product is used in a spray form

Occupational exposure controls

Wear face mask giving complete face protection No respiratory protection is required unless subject to contact with substance mist Wear plastic or rubber gloves Wear suitable clothing providing resistance to acids

Odour

Odourless

Appearance

Liquid, pale yellow, soluble in water

Vapour pressure

not known

Vapour density

not known

Freezing point

<0 °C at 760 mm/Hg

Completely soluble in water

Specific gravity (water=1)

0.95

Non combustible

  

-   No hazardous reactions known if used for its intended purpose
-   Avoid overheating, Avoid contact with alkalis (strong bases)
-   Contact with alkali metals liberates flammable gas, Incompatible with amines, Incompatible with alkalis
    (strong bases)

Toxicological information

No experimental data available

Inhalation

Can cause damage to the respiratory system

Contact with skin

Causes burns (R34) Causes burns (R34)

Ingestion

The ingestion of significant quantities may cause damage to mucous membranes

Carcinogenicity

No evidence of carcinogenic effects

Ecotoxicity

May cause acute effects in the aquatic environment This product does not contain ingredients which are classified in the EU as dangerous for the  environment. 

Mobility

Completely soluble in water

Persistence and Biodegradability

Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently  biodegradable.

Bioaccumulation Potential

Bioaccumulation of the components in this product is insignificant.

Other Adverse Effects

No environmental problems are expected when the product is used / handled correctly.In its intended use, the product will not be released into the environment. Presents little or no hazard to the aquatic environment

Classification
 

EU Waste class: 06.01 This material and/or its container must be disposed of as hazardous waste

Disposal considerations
 

Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation

Risk Phrases

Causes burns (R34)

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, eye/face protection and gloves. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible.)

Text of R and S phrase codes used in this safety data sheet:-  R34: Causes burns;  R36: Irritating to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product .in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top