/ / / Heavy Duty Acidic CIP Detergent Descaler

Shop

Heavy Duty Acidic CIP Detergent Descaler

​ ​ ​

It is highly effective at removing inorganic scale deposits.

SKU: RXSOL-68-6830-025 Category:

Description

Heavy Duty Acidic CIP Detergent Descaler Scale Offshore is a highly concentrated acidic cleaning agent engineered for efficient removal of mineral scale and deposits while remaining mild to personnel, equipment, and the environment. It is classified as PLONOR (Poses Little or No Risk to the environment), making it suitable for use in environmentally sensitive offshore and marine applications. The product contains RXSOL active agents, a 100% natural, health- and environmentally optimized substrate, delivering powerful cleaning performance with a reduced ecological footprint. Its biodegradable formulation supports safer handling, minimizes environmental impact, and aligns with modern sustainability and regulatory requirements.






Product Details

Application

RXSOL CIP Scale offshore Descaler is developed and optimised for CIP (Cleaning in Place) operations of offshore water-borne systems. For optimal result, we recommend that CIP-machines are used in order to control temperature and circulation.
 
Typical applications of Offshore Scale Cleaner
  • All types of heat exchangers
  • Water pipe systems
  • Water heaters
  • Cooling rolls
  • Tanks
  • Boilers
  • Air heaters.

Dosage & Procedure

DIRECTIONS FOR USE
  • Stir or shake the product before use.
  • Dilute 1 part Offshore Scale Descaler with 5 parts of water.
  • Recommended cleaning temperature: 60°C.
  • For very severe fouling, increase the concentration or increase the temperature.

This offshore scale CIP cleaner is a high-performance chemical formulation designed for effective Cleaning-In-Place of water-borne systems. It rapidly dissolves limescale, carbonates, rust, salts, and marine fouling without the need for equipment dismantling. The product is optimized for controlled circulation and temperature, ensuring uniform and safe cleaning. It restores heat transfer efficiency, reduces downtime, and extends equipment service life in offshore environments.

Technical Specifications

Parameters Value
Appearance Clear, Liquid
Odor Charateristic
pH 1-2
Solubility Highly miscible
Density >1.2

Some key features of RXSOL Offshore Descaler

  • Optimized for CIP operations in offshore and marine systems
  • Effective against scale, rust, salts, and biological fouling
  • Safe on common metals, rubber seals, and coatings
  • Reduces downtime and improves system efficiency

Notes & Precautions

Types of fouling or scale cleaned using RXSOL Offshore Scale Descaler CIP Detergent
  • Limescale & other Carbonates
  • Rust & other metal oxides
  • Cement
  • Salts
  • Humus
  • Shellfish

Generic / Chemical Name

CIP Offshore Scale Remover

Safety Data (MSDS)

Product Name               Heavy Duty Acidic CIP Detergent Descaler
Part Number   RXSOL-68-6830-025

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email mail@rxmarine.com
Website www.rxmraine.com

Component Concentration (%) CAS Number
Nitric Acid 20-30% 7697-37-2
Phosphoric Acid 5-10% 7664-38-2
Organic Acids 5-15% Proprietary
Phosphonic Acids blend 5-10% Proprietory
Surface Active Agents for enhanced cleaning 1-2% Proprietory

This is a proprietory mixture product with no other hazardous ingredients.

Signal Word Warning
Hazard Statements
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary Statements
Precautionary statements - prevention
P261 Avoid breathing dust/fume/gas/mist/vapours/spray
P280 Wear eye protection/face protection
Precautionary statements - response
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P312 Call a POISON CENTER or doctor/physician if you feel unwell
Precautionary statements - storage
P403+P233 Store in a well-ventilated place. Keep container tightly closed
Supplemental Hazard Statements None
Other hazards
Results of PBT and vPvB assessment
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.

General notes Take off contaminated clothing.
Following inhalation Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Following skin contact Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.
Following eye contact Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.
Following ingestion Rinse mouth. Call a doctor if you feel unwell.
Most important symptoms and effects, both acute and delayed Irritation, Cough, Dyspnoea
Indication of any immediate medical attention and special treatment needed None

Suitable extinguishing media
Co-ordinate firefighting measures to the fire surroundings
water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)
Unsuitable extinguishing media Water jet
Special hazards arising from the substance or mixture Ingredients of the mixture combustible. The product itself does not burn.
Hazardous combustion products Carbon monoxide (CO), Carbon dioxide (CO₂)
Advice for firefighters In case of fire and/or explosion do not breathe fumes. Fight fire with normal precautions from a reasonable distance. Wear self-contained breathing apparatus.

Personal precautions, protective equipment and emergency procedures

For non-emergency personnel
Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.
Environmental precautions Keep away from drains, surface and ground water. The product is an acid. Before discharge into sewage plants the product normally needs to be neutralised.
Methods and material for containment and cleaning up  
Advice on how to contain a spill Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents).
Other information relating to spills and releases Place in appropriate containers for disposal.
Reference to other sections Hazardous combustion products: see section 5. Personal protective equipment: see section 8. Incompatible materials: see section 10. Disposal considerations: see section 13.

Precautions for safe handling Provision of sufficient ventilation.
Advice on general occupational hygiene Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.
Conditions for safe storage, including any incompatibilities
Keep container tightly closed.
Incompatible substances or mixtures Observe hints for combined storage
Consideration of other advice:   
Specific designs for storage rooms or vessels Recommended storage temperature: 15 – 25 °C
Specific end use(s) No information available.

 
Eye/face protection Use safety goggle with side protection.
Skin protection
Hand protection
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374.
For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from
measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide.
Type of material
NBR (Nitrile rubber)
Material thickness
0,11 mm
Breakthrough times of the glove material
480 minutes (permeation: level 6)
Other protection measures
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Respiratory protection
Respiratory protection necessary at: Aerosol or mist formation. Type: ABEK (combined filters against gases and vapours, colour code: Brown/Grey/Yellow/Green).
Environmental exposure controls Keep away from drains, surface and ground water.

Physical state Liquid
Color Colorless
Odor Odorless
Melting point/freezing point Not determined
Boiling point or initial boiling point and boiling range ~100 °C at 1,013 hPa
Flammability Non-combustible
Lower and upper explosion limit Not determined
Flash point Not determined
Autoignition temperature Not determined
Decomposition temperature Not relevent
pH (value) 1 - 2 (20 °C)
Kinematic viscosity Not determined
Water solubility Miscible in any proportion
Partition coefficient n-octanol/water (log value) This information is not available
Vapour pressure 23 hPa at 20 °C
Density 1.24 g /cm³ at 20 °C
Relative vapor density Information on this property is not available
Particle characteristics Not relevant (liquid) 
Oxidising properties None
Other information  
Information with regard to physical hazard classes
Hazard classes acc. to GHS
(physical hazards): not relevant
Other safety characteristics  
Miscibility Completely miscible with water

Reactivity         This material is not reactive under normal ambient conditions.
Chemical stability The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Possibility of hazardous reactions Violent reaction with: strong oxidiser, Reducing agents, Metals, Bases
Conditions to avoid There are no specific conditions known which have to be avoided.
Incompatible materials Different metals
Hazardous decomposition products Hazardous combustion products: see section 5.

Information on toxicological effects
Test data are not available for the complete mixture.
Classification procedure The method for classification of the mixture is based on ingredients of the mixture (additivity formula).
Acute toxicity Shall not be classified as acutely toxic.
Skin corrosion/irritation Shall not be classified as corrosive/irritant to skin
Serious eye damage/eye irritation Causes serious eye irritation.
Respiratory or skin sensitisation Shall not be classified as a respiratory or skin sensitiser.
Germ cell mutagenicity Shall not be classified as germ cell mutagenic
Carcinogenicity Shall not be classified as carcinogenic.
Reproductive toxicity Shall not be classified as a reproductive toxicant
Specific target organ toxicity - single exposure May cause respiratory irritation.
Specific target organ toxicity - repeated exposure Shall not be classified as a specific target organ toxicant (repeated exposure).
Aspiration hazard Shall not be classified as presenting an aspiration hazard.
Symptoms related to the physical, chemical and toxicological characteristics
If swallowed
Data are not available.
If in eyes Causes serious eye irritation
If inhaled Irritation to respiratory tract, cough, Dyspnoea
If on skin irritant effects, pruritis, localised redness
Other information None
Endocrine disrupting properties None of the ingredients are listed.
Toxicity Shall not be classified as hazardous to the aquatic environment.
Biodegradation Data are not available.
Bioaccumulative potential Data are not available.
Mobility in soil Data are not available.
Results of PBT and vPvB assessment Data are not available.
Endocrine disrupting properties Data are not available.
Other adverse effects Data are not available.

Waste Treatment Methods This material and its container must be disposed of as hazardous waste. Dispose of contents/container in accordance with local/regional/national/international regulations.
Sewage disposal-relevant information Do not empty into drains.
Remarks Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. Please consider the relevant national or regional provisions.

UN number Not subject to transport regulations
UN proper shipping name Not assigned
Transport hazard class(es) Not assigned
Packaging group Not assigned
Environmental hazards Non-environmentally hazardous acc. to the dangerous goods regulations
Special precautions for user There is no additional information.
Transport in bulk according to IMO instruments The cargo is not intended to be carried in bulk.
Information for each of the UN Model Regulations  
Transport informationNational regulationsAdditional information(UN RTDG) Not subject to transport regulations. UN RTDG
International Maritime Dangerous Goods Code (IMDG) - Additional information Not subject to IMDG.
International Civil Aviation Organization (ICAO-IATA/DGR) - Additional information Not subject to ICAO-IATA.

Safety, health and environmental regulations/legislation specific for the substance or mixture There is no additional information.
Australian Inventory of Chemical Substances(AICS) All ingredients are listed or exempt from listing.
Other information Directive 94/33/EC on the protection of young people at work. Observe employment restrictions under the Maternity Protection Directive (92/85/EEC) for expectant or nursing mothers.
Chemical Safety Assessment Chemical safety assessments for substances in this mixture were not carried out.
 
Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top