Redkleen RX 400 Radiator Flush Cleaner

Redkleen RX 400 ( Radiator Flush & Clean) is a non-acidic radiator and cooling system cleaner that effectively cleans in one simple 20-minute operation

SKU: RXSOL-39-4051-210 Category:

Description

Redkleen RX 400 ( Radiator Flush & Clean) is a non-acidic radiator and cooling system cleaner that effectively cleans in one simple 20-minute operation. Many similar products have to be left in the cooling system for several days, which creates the risk of the user either forgetting or extending the drain and flush time for reasons of convenience. The results can be detrimental and cause expensive, long-term damage to the cooling system and associated components.Redkleen RX 400 ( Radiator Flush & Clean) overcomes this potential risk as the whole cleaning process is completed in one simple operation.






Product Details

Application

Use Redkleen RX 400 ( Radiator Flush & Clean) as a complete cooling system flush to remove insulating built-up sludge and residue before changing coolant in any cooling system. This procedure will ensure optimum heat transfer and efficiency of the entire cooling system. Whenever draining a cooling system or changing brands of coolant it is always recommended to clean the system with Redkleen RX 400.

Use Redkleen RX 400 before removing a radiator from a vehicle for reconditioning. Clean the entire system with Redkleen RX 400 so when the radiator is reinstalled, the core will not be contaminated with scale and residue from the rest of the system.

Dosage & Procedure

Directions for use
Note: Exercise caution when removing radiator caps. Release pressure slowly to avoid scalding.

 

  • Turn on the heater and add required amount of RX 400 to a warm radiator.
  • Run the engine for 20 minutes minimum (no longer than 1 hour). Stop the engine and allow it to cool.
  • Drain the system by removing the bottom radiator hose or opening the drain cock. Thoroughly flush and rinse out all old coolant. Replace the hose or close the drain cock.
  • Add RXSOL 4001  corrosion inhibitor and clean, soft or demineralised water, or
  • Where specified, use anti-freeze/anti-boil coolant (such as RXSOL-4004 ultra Coolant).
  • Start the engine, check for leaks and top up as necessary.
     

Dose Rates

  • All cars and light commercials - add 500 ml
  • For trucks, tractors and large engines - add 500 ml for every 6 litres (quarts) of cooling system capacity.

Technical Specifications

Physical Properties and Tecnical Specification

Appreance : Liquid
Colour : Clear
Odour : Odourless
pH : Alkaline
Flash point : Not flamable
Boiling Point   109 °C
Freezing point   NA
Solubility in Water   Soluble in any ratio
 

Notes & Precautions

Features & Benefits  :

  • Cleans fast in 20 minutes
  • Reduces overheating
  • Safe to use with all coolant types
  • No pre-mixing
  • Neutralises harmful acids
  • Reduces mineral scale and sludge
  • Liquid easy to use and handle.

Packing  : 1, 4, 20 25 Ltrs, 210 Ltrs.

Storage and Handling  :

Keep container dry. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes. Keep away from incompatibles such as metals, acids.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

Generic / Chemical Name

Radiaator Flush Cleaner

Supply Locations

Redkleen RX 400 Radiator Flush & Cleaner Manufacturer and supplier in Mumbai, Surat HAZIRA, Gandhidham Kandla Gujrat, Chennai, Visakhapatnam, Kolkata, Paradip, Sudan, Nairobi, Kenya, Muscat, Barka, Ruwi, Oman, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, UAE Gulf, Yemen

Industry Applications

Radiator Maintenance chemicals and Radiator Coolant Manufacturer and Supplier :

Radiator Coolant 20% Conc. ::: Part No.- RXSOL-40-4045-025
Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks,  ships and lokomotives. 

Coolant Green RXSOL G 93-94 ::: inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals Part No.- RXSOL-40-4021-025 

Coolant 25 Ltrs ::: Useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. Part No.- RXSOL-40-4004-025


Coolant Premix Redcool ::: premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports)  Part No.- RXSOL-40-4043-025
 
 
Radiator Condensor Scale Controler::: 
Condensor Dispersant Scale Controler (For Radiators, DG - sets, Closed Cooling System) , Specially formulated for SCALE CONTROL . The stable oxide film that is formed by RXSOL-40-4007-020 prevents corrosion caused by electrolytic action between dissimilar metals used in the system. RXSOL-40-4007-020 has been field tested and found to have no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in the systems. Part No. RXSOL-40-4007-020


Radiator Cleaner ::: This is specially formulated for use as radiator cleaner. Radiator cleaner removes the dirt, grease, scale, grime & solder from the engine cooling system. Radiator cleaner is a powerful cleaning agent not only for the automobile engine but can be used for the steam tube and boiler tube etc. Part No.- RXSOL-16-2697-025

 
Engine Water Treatment DEWT ::: Multi-functional corrosion inhibitor for protecting recirculating cooling and heating water systems. RXSOL LIQUID EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, non-staining solution, which protects the system from corrosion and hard water scale.  Part No.- RXSOL-40-4010-025
 
Engine Parts Washing Solvent ( RXSOL - PWS ) :::  This product provides an economical and effective method for cleaning metal parts while being gentle on the hands.  Grease, oil, dirt, sludge, grime, ink, light carbon and similar soils are dissolved with minimal soaking and brushing.  Machine shops, garages, factories, industrial repair shops and automobile make-ready facilities will find this product to be an ideal compound for use in their recirculating parts washer units. Part No. RXSOL-10-1727-025

Carbon Remover ::: Concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.. Part No.- RXSOL-16-1003-025


Hand Cleaner Paste, Waterless ::: It is a milky white creamy gel containing natural ingredients, moisturisers, surfactants, and powerful dispersing agents. This is a batter substitute to petroleum products & caustic based detergetns which drain the body oil. ONLY 2 TO 5 grams SUFFICIENT tRXSOL-16-1001-001

Our Valuable Marine Chemical Products:

Essential Marine Chemicals for Ship Maintenance, Cleaning, and Water Treatment

Marine operations demand reliable maintenance solutions to keep vessels efficient, safe, and compliant with industry standards. From engine room cleaning to boiler water treatment and ballast tank maintenance, the right marine chemicals play a vital role in reducing downtime, preventing corrosion, and improving equipment performance.

At RXSOL, we provide a complete range of high-performance marine chemicals designed for cleaning, descaling, water treatment, fuel conditioning, and environmental protection.

1. Aqua Break – Heavy Duty Degreaser

A powerful biodegradable cleaner for removing oil, grease, and dirt from engine rooms, bilges, and machinery spaces.

2. EnviroClean – Eco-Friendly Cleaner

A safe and environmentally responsible cleaning chemical for multipurpose industrial and marine cleaning.

3. Descalex Powder – Scale Removal Powder

Effective powder descaler for boilers, heat exchangers, and cooling systems to remove hard scale deposits.

4. Descaling Liquid – Liquid Descaler

Specially formulated liquid cleaner for dissolving lime scale, rust, and mineral deposits.

5. Ethylene Glycol – Cooling System Protection

Used as antifreeze and coolant in engine cooling systems to prevent freezing and overheating.

6. Disclean – Disc Separator Cleaner

Removes sludge, oil residues, and carbon deposits from disc separators and purifier systems.

7. Rocor NB – Corrosion Inhibitor

Nitrite borate-based cooling water treatment chemical designed to prevent corrosion in closed cooling systems.

8. Biological Toilet Cleaner

Biodegradable toilet cleaner for marine sanitation systems that controls odor and breaks down waste naturally.

9. CarbonClean – Carbon Deposit Remover

Powerful cleaner for removing carbon deposits from engine parts, injectors, and exhaust systems.

10. MultiClean – Multi-Purpose Cleaner

Versatile cleaner for deck, machinery, and equipment cleaning applications.

11. Fuel Conditioner – Fuel Treatment Chemical

Improves fuel combustion, reduces sludge formation, and enhances engine performance.

12. Boiler Coagulant – Boiler Water Sludge Conditioner

Prevents sludge accumulation and helps in easy blowdown of boiler impurities.

13. Calcium Hypo – Water Disinfection Chemical

Used for water treatment, sanitation, and disinfection onboard ships.

14. ColdWash – Solvent-Based Cleaner

Ideal for cold cleaning applications where grease and oil deposits need effective removal.

15. Degreaser – Industrial Oil and Grease Cleaner

Heavy-duty cleaning solution for machinery, engine rooms, and workshop maintenance.

16. MetalBrite – Metal Brightener and Rust Remover

Specialized acidic cleaner for removing rust, oxidation, and stains from metal surfaces.

17. Oxalic Acid – Rust and Scale Cleaner

Used for descaling, rust removal, and cleaning of industrial and marine systems.

18. Air Cooler Cleaner – Heat Transfer Surface Cleaner

Designed to remove oil, dust, and carbon deposits from air coolers and intercoolers.

19. Handcleaner Paste – Industrial Hand Cleaner

Removes grease, oil, and industrial dirt while being gentle on the skin.

20. Seacare OSD – Oil Spill Dispersant

High-performance oil spill treatment chemical for quick dispersion and cleanup of oil contamination in marine environments.

Why Marine Chemicals Are Important?

Using the right marine chemicals helps:

  • Improve operational efficiency

  • Reduce equipment downtime

  • Prevent corrosion and scale formation

  • Extend equipment lifespan

  • Maintain compliance with marine regulations

  • Ensure safer and cleaner ship operations

Why Choose RXSOL Marine Chemicals?

RXSOL marine chemicals are specially formulated for the shipping and offshore industry, ensuring high performance, easy application, and reliable results under harsh operating conditions.

Keywords:

Marine Chemicals, Ship Cleaning Chemicals, Boiler Water Treatment Chemicals, Marine Degreasers, Marine Descalers, Fuel Conditioner for Ships, Oil Spill Dispersant, Cooling Water Treatment Chemicals, Marine Maintenance Chemicals

Email us to get best discounted price for Radiator coolant and Cleaner in India - UAE Middle East - Oman : mail@rxmarine.com

Safety Data (MSDS)

Product Name RXSOL-40-4051-025
Trade Name Redkleen RX 400 Radiator Flush Cleaner

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Gandhidham, Fujairah, Muscat, Nairobi

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Proprietory Blend Of Alkaline Surfactant ingredient.                                                                                                

POTENTIAL HEALTH EFFECTS:

INHALATION: Inhalation of vapor or mist is corrosive to respiratory tract. Symptoms include coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.
EYE CONTACT Liquid , irritating to eyes. Immediate irritation followed by destruction of tissue
SKIN CONTACT Use gloves. Dont directly on naked skin
INGESTION: Moderately toxic, causes nausea, vomiting, loss of consciousness
CHRONIC Effects Damage to kidneys and liver .Changes in bones or joints

INHALATION: Ensure the victim’s clothing or skin has not been contaminated by the acid before removing the victim to fresh air. If breathing has stopped, begin artificial respiration. Call ambulance immediately for assistance
EYE CONTACT: Flush eyes with water for 15 minutes with copious cool flowing water. If only one eye is affected, be careful not to flush contaminated water into the other eye. Tilt the head in the direction of the affected eye while flushing. Take the victim to a medical facility immediately, and apply ice water compress during transport.
SKIN CONTACT: Move the victim immediately under an emergency shower or other water source and flush the affected area with large amounts of cool running water. Immediately washing off the acid is of primary importance. Remove all contaminated clothing while flushing with water. If there is a large area of exposure, arrange for emergency medical assistance while the victim is being rinsed with water.Immediately after flushing with water, begin massaging calcium gluconate gel into the burn site. Apply the gel every 15 minutes and massage until pain/redness resolves or until medical care is available. The first aider should wear gloves when applying the gel to
prevent transfer of the acid.
INGESTION: Do not induce vomiting. Rinse mouth out with water. Call an ambulance immediately for assistance

FLASHPOINT (TEST METHOD): None
FLAMMABLE LIMITS:  
LOWER: NA
UPPER: NA
GENERAL HAZARD: NA
FIRE FIGHTING INSTRUCTIONS: . Approach fire from upwind side. Avoid breathing smoke, fumes, mist, or vapors on the downwind side.Firefighters wear protective clothing and self-contained breathing apparatus
EXTINGUISHING MEDIA: Dry powder, carbon dioxide (CO2), water fog or spray
HAZARDOUS COMBUSTION PRODUCTS: . Smoke, irritating vapors, toxic fumes of POx, and corrosive F fumes, CO, CO2

 

LAND SPILL: Emergency response coordinator must have mandated training. Eliminate all ignition sources.

SMALL SPILLS: Pick up with absorbent materials and place in non-leaking containers; seal tightly for proper disposal or reuse.

LARGE SPILLS: Evacuate the hazard area of unprotected personnel. Wear appropriate respirator and protective clothing. Shut off source of leak if safe to do so.
Dike and contain. Remove with vacuum trucks or pump to storage/salvage vessels.

WATER SPILL: Notify proper authorities.

Clean up leaks/spills immediately to prevent soil or water contamination.

HANDLING: Avoid contact with skin, eyes, and clothing. After handling this product, wash hands before eating, drinking or smoking. If contact occurs, remove contaminated clothing. If needed, take first aid action shown in section IV. Launder contaminated clothing before reuse.

STORAGE: Store away from food stuffs, alkaline materials

PERSONAL PROTECTION: If TLV is exceeded wear NIOSH approved respirator. Use heavy rubber type gloves, full-face shield and boots, aprons, drench showers, eye wash as needed for protection against spills and/or splashes

Appreance : Liquid
Colour : Clear, Brown
Odour : Odourless
pH : Alkaline
Flash point : Not flamable
Boiling Point   109 °C
Freezing point   NA
Solubility in Water   Soluble in any ratio
 

STABILITY: Stable
CONDITIONS TO AVOID: High temperatures
MATERIALS TO AVOID: Acidic materials may react with metals to produce gas.
HAZARDOUS DECOMPOSITION PRODUCTS: Corrosive F fumes, toxic POx fumes, from combustion -smoke, CO, CO2
HAZARDOUS POLYMERIZATION: Will not occur

Phospho LDLo: 220 mg/kg (unr - man)
LD50: 1530 mg/kg (oral - rat)
LD50: 2740 mg/kg (skin - rat)

HF LCLo: 50 ppm / 30 M (inh - human)
LC50: 966 ppm / 1 hr (inh - rat)
TCLo: 100 mg/m3 (inh - human) NOSE,EYE, PUL

Harmful to aquatic life in high concentrations

Phospho 138 ppm / 24 hr / mosquito fish / TLm / fresh water
HF 60 ppm / fish / lethal / fresh water

Dispose as hazardous waste. Classification and documentation is required before disposal. Follow all local, state and federal regulations

Transport of dangerous goods by road , rail and inland waterway (ADR/RID/ADN)

UN        Number                                          None
Proper shipping name Redkleen RX 400 Radiator Flush & Cleaner
Particulars in the transport document Unrestricted, Not Classified as Dangerous Goods
Class None
Packing group None

International Maritime Dangerous Goods Code (IMDG)

UN        Number                                          None
Proper shipping name Redkleen RX 400 Radiator Flush & Cleaner
Particulars in the transport document Unrestricted, Not Classified as Dangerous Goods
Class None
Packing group None

International Civil Aviation Organization (ICAO-IATA/DGR)

UN        Number                                          None
Proper shipping name Redkleen RX 400 Radiator Flush & Cleaner
Particulars in the transport document Unrestricted, Not Classified as Dangerous Goods
Class None
Packing group None

TSCA (Toxic Substance Control Act): Components of this product are listed on the TSCA Inventory.

CERCLA (Comprehensive Environmental Response, Compensation and Liability Act): Silcate
Contact local authorities for other reporting requirements.

CALIFORNIA PROPOSITION 65: Not listed.

State Right-to-Know Programs: MA, NJ, PA

NFPA Ratings
Health: 4
Flammability: 0
Reactivity: 1
HMIS Protective Equipment: X See your supervisor.

 

Other Information  

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

 
top