Rust Remover

Excellent pre treatment and binder for metal surfaces to be painted. concentrated blend of rxsol proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface.

SKU: RXSOL-16-1088-210 Category:

Description

This is very effective and well balanced products to Remove Rust from all kinds of surface.

This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.

This high-performance formulation is a scientifically balanced blend of corrosion inhibitors, surface-active agents, and emulsified acidic components. It is specially engineered for effective cleaning and brightening of aluminium and copper surfaces, as well as the rapid removal of rust stains from painted surfaces without damaging the underlying material. The product penetrates quickly, dissolving oxidized residues while leaving a protective layer that minimizes further corrosion.






Product Details

Application

Very effective products to removes rust and stains also improves metal appearance.

Direction for use
For rust removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-16-1011-RR-210 , can be applied by brush ranging from 10-50% and left to react for 5 - 40 minutes then  the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.

• For aluminium , only diluted solution up to 10 - 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 - 10 parts water, and immerse 
  from 1 - 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with elevate4d temperatures
  up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.

For best performance on aluminium use RXSOL Degreaser for degreasing as it has a neutral pH. Paintwork :
RXSOL-16-1011-RR-210  should be diluted with water  1:4 . Then solution can be applied by brushing, spraying
for  10 - 20 minutes the residues should be rinsed off thoroughly with high pressure  water.
 


 

Dosage & Procedure

on completion of degreasing CLEANING OPERATION if  rust / scale ( water )  stains from metal surface ,use 10 to 50% of RXSOL-16-1011-RR-210 with  fresh water for 20 -30 minutes .  For detailed instruction pl. click on this link http://tiwariindia.com/wiki/index.php/Main_Page     .

Appearance                                 : Clear & Colourless fLiquid
Specific gravity (200C)                :  1.21
Flash point  cc                              :  None

R 34    : Causes burns.
S 26    : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.


Note : Also can be used for Disc cleaning without dismantling disc stacks 
         : Improves efficiency of centrifuge installation.


 

Notes & Precautions

Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift; as shower is recommended
 

Active Matter

81-90

Generic / Chemical Name

Rust Cleaning chemicals

Supply Locations

Rust Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Rust Remover at a competitive price from us. We have ready stock of Rust Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Safety Data (MSDS)

Product Name RXSOL-16-1011-RR
Product Type RUST REMOVER

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point ::: Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat, Nairobi

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Ethoxylated Fatty alcohol, Phosphoric Acid and 2-2 Butoxy Ethanol remaining which is not in the list of hazardous materials .

Human Health  Hazards    R 34 : Causes severe burns
Keep away from food, children , animal .

Inhalation

After inhalation medical attention require

Skin Contact

In case of contact with skin , wash immediately with plenty of water and soap   Remove contaminated clothes.

Eye Contact

Flush with running water for at least 15 minutes Immediately medical attention require.

Ingestion

Seek medical attention , try to drink more plenty of fresh water.

Non combustible product

Suitable 

Not known , on direct exposure to heat dangrous emission of gas of COx SOX  can be released

Not suitable

Not applicable 

Special  

Not applicable

Protection of fire Fighter

Not applicable  

Precaution for fire-fighters   

Wear protective equipment with breathing apparatus.

Enviromental Precaution

Direct flow into drainage system, surface or ground water is  prohibited. First of all neutralize with alkaline materials like lime powder for pH balancing between 6-10.

Cleaning Method

Flush Spill Area with Water and avoid contact with skin and eye.

Condition to Avoid    

Non flammable but avoid direct heating

Materials  to Avoid  

Do not subject to ALKALINE medium.

Handling

Keep Container Tightly Closed

NOTE :
Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is req- uired and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to  water  never add water to RXSOL.)

Personal protection:

Respiratory System Protection

Approved respirator must be worn when spraying

Eye Protection   

Strictly wear eye protection

Hand protection

Wear PVC chemical resistance protective gloves

Appearance

Clear  Liquid

Density   

g/cm3 at 15°C: >1

pH  

10% solution 1.5-2.5

Flash Point

Not applicable

Compatibility  

 

Metal   

Concentrate and long touch may corrode.

Rubber 

No known effect

Hazardous Decomposition Products: Do not occur if stored and used as directed.  In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced. NOTE : AVOID CONTACT WITH ALKALINE SUBJECT.

Skin Irritation

Cause severe irritation

Eye Irritat

Cause severe irritation

Sensitization    

Cause Sensitizing

Chronic Toxicity  

Not Identified

Carcinogencity   

No

 RXSOLMB1011 is degradable , and due to highly acidic in nature must be neutralized as per guidance and ingridents used in 
 it.Direct contact is Harmful to aquatic organism.

As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article..

Transport over land ADR/RID

1805 8/11c 8/11c

Transport over inland waterways ADN/ADNR

 

Transport over sea IMDG

8

Transport by air ICAO/IATA

8/1805

Phosphoric acid

 

sea

EMS 8-08, MFAG 700 PG III

Classification and labelling according to 4. Novelle Gefahrstoff-Verordnung Symbols of danger :C Corrosive Ingredients :Phosphoric acid R-phrases :

R34

Cause burns

S-phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S26

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S45

In case of accident or if you feel unwell, seek medical advice immediately

National prescriptions : Water hazard class (WGK) :- 2 (self classification on the basis of component assessments or
analogy conclusions without addition/subtraction of points for good/poor biodegradability etc.)

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
 

top