/ / / Scale Inhibitor Antiscalant

Shop

Scale Inhibitor Antiscalant

​ ​ ​

Scale Inhibitor Antiscalant 9000 is specially designed to inhibit the scale formation in RO-systems equipped with polyamide-, celluloseacetate- and polyethermembranes with anionically charged surface.

SKU: RXSOL-15-3302-250 Category:

Description

Scale Inhibitor Antiscalant 9000 is specially designed to inhibit the scale formation in RO-systems equipped with polyamide, celluloseacetate- and polyethermembranes with anionically charged surface.

It  is a stabilized solution of organic phosphonates and polyacrylates with high dispersing effect. Scale Inhibitor Antiscalant 9000is an excellent inhibitor for calcium sulphate and calcium carbonate. A further advantage is the excellent stabilizing effect for barium and strontium sulphate. In addition even iron may be stabilized. The contained copolymers act also as a dispersing agent for organic contaminants and metal oxides.






Product Details

Application

Scale Inhibitor Antiscalant 9000 is designed as a highly efficient scale inhibitor for use with cellulose acetate and polyamide membranes. There is no interaction with the membrane material.

Dosage & Procedure

The dosage is controlled proportionally to the feed water flow. Standard metering pumps are used. Fitting materials are PE, PP or coated steel. In order to avoid biological fouling, the containers have to be cleaned from time to time with a 10 % sodium bisulfite solution or a sodium hydroxide water solution solution at pH=13.

Scale Inhibitor Antiscalant 9000can be diluted with water in any ratio. However, it is recommended to inject the antiscalant undiluted or as solution up to 10 %. The diluted solutions have to be consumed within 48 hours after preparation. The required dosage level depends on the operating conditions and water composition and varies in the range of 1 – 10 ppm as delivered.

Technical Specifications

 

Appearance : Clear, dark yellow liquid
Density : 1.14 – 1.16 g/cm3
Viscosity : Approx. 50 mPa.s
pH-value : 4.8 – 5.3
Boiling Point : 105° C
Freezing Point : -10° C
Solubility in water : unlimited

 

Active Matter

80-86

Generic / Chemical Name

Scale Inhibitor Anti Scalant

Supply Locations

Scale Inhibitor Antiscalant 9000 manufacturer and supplier in Yemen, Sudan, Nairobi, Muscat Sohar, Oman, Fujairah, Dubai, Sharjah, Abudhabi, UAE Middle East, Mumbai, Kandla Surat Gandhidham Gujrat, Chennai Ennore, Visakhaptnam, Kolkata West Bengal, Varanashi, Tata, Patna, Canada

Industry Applications

#DESCALER_marinechemical
#DESCALEIT_marinechemical
#DEGREASER_marinechemical
#AIRCOOLERCLEANERACC-9
#D.C.W.T. NONCHROMATELIQUIDEWT/MAXIGARD
#OPTITREAT
#BIOACTIVETOILETCLEANER
#CHLORIDETESTKIT
#CONDUCTIVITYTESTKIT 
#HYDRAZINETESTKIT
#NITRITETEST
#OILANDGREASEREMOVERH.D999
#OILGREASEREMOVERHDE-777
#BoilerWaterTreatmentTestKit
#POTABLEWATERTESTKIT

Safety Data (MSDS)

Product Name : Scale Inhibitor Antiscalant 9000
Part Number : RXSOL-33-3302-250

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : KANDLA, HAZIRA, MUMBAI, CHENNAI, VIZAG , KOLKATA , UAE , OMAN  KENYA.

Phone +91 22 20871200 -1400
Fax +91 22 20871500 :::AOH :0091 9821214367
Email support@rxmarine.com
Website www.rxmarine.com

Name     of        Substance                          Cas Number EINECS No Wt.Percentage Symbol
Polyacrylate, Sodium salt 9003-04-7   - 5-21  Xi
Phosphonate, Sodium salt .  --- Confidential 9- 30  Xn
Proprietory Mixture --- --- 12-20  

Classification of the mixture Regulation (EC) No 1272/2008

Signal Word

None

Hazard Statements
Keep out of reach of children.
Do not eat, drink or smoke when using this product.
Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
keep locked if possible

Precautionary statements prevention
Keep locked up and out of the reach of children.
Keep away from food, drink and animal feedingstuffs.
When using do not eat, drink or smoke.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Precautionary statements response

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair):Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.Immediately call a POISON CENTER or doctor/ physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage.
Storage: Store locked up. Store in corrosive resistant stainless steel container with a resistant inner liner. Disposal: Dispose of contents/ container to an approved waste disposal plant.

 

Eye Contact Remove contact lenses. Hold eyelids apart. Immediately flush eyes  with plenty of low-pressure water for at least 15 minutes. Subsequently consult an with doctor
Skin Contact Wash thoroughly with soap and water.Remove contaminated  clothing. Get medical attention if skin irritation developsvor persists. 
Inhalation:             

Provide fresh air. Seek medical attention if problems persist.
Ingestion:
Do not feed anything by mouth to an unconscious or convulsive  victim. Rinse mouth immediately. When conscious drink
large quantities of water. Do not induce vomiting. Seek medical attention.
Notes to Physicians Treat symptomatically.

 
General information:

Extinguishing materials should be selected according to the surrounding area. The product itself is not combustible
Suitable extinguishing media

Carbon dioxide (CO2). Dry extinguishing powder. Water fog. Foam.

Extinguishing media which must not be used for safety reasons: High power water jet.                   

  High power water jet.

Special exposure hazards arising from the substance itself,combustion products, resulting gases

 Oxides of carbon, nitrogen and phosphorus. 

Special protective equipment for fire-fighters:

In case of fire. Fire fighters should wear positive pressure self-contained breathing apparatus (full face-piece type). 
Additional information:

Contaminated fire-fighting water must be c ollected separately.

Personal precautions, protective equipment and emergency procedures

See protective measures under point 7 and 8.
Enviromental  Precaution

No special environmental protection measures are necessary.

Methods and materials for containment and cleaning up

Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the assimilated material according to the section on waste disposal.

Technical meaures and storage conditions: 

 Provide for sufficient ventilation and punctiform suction at critical points.
Precautions against fire and explosion:  No special precautionary measures are necessary.
Packaging materials:  Keep only in the original container.

Requirements for storerooms and containers: 

 Keep container tightly closed in a cool, well-ventilated place.

Information about storage in one common storage facility:

 Do not store together with: Food and fodder.

Further information concerning storage conditions:

 None
Storage class:  12
Specific use(s):  Observe instructions for use.
Advice on safe handling The following must be prevented: metals
Storage

Technical measures and storage conditions (avoid freezing conditions):  Maximum storage temperature: 30 °C Minimum storage temperature: 5 °C

Advice on general occupational hygiene

Wash hands after use. Do not to eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas.

Critical values of exposure:

Does not contain substances above concentration limits fixing an occupational exposure limit.

Components with workplace

or biological limit values

to be monitored

Limitation and monitoring of exposure Exposure limit values:  Refer to chapter 7.No further action is necessary. Respiratory protection: With correct and proper use,and under normal conditions, breathing protection is not required.         
Eye protection : Splash proof safety goggles                 
Hand protection:Suitable gloves type: Pull-over gloves of rubber. Body protection: Protective clothing. 
Environmental exposure controls: Refer to chapter 7.No further action is necessary.
General protection and hygiene measures: Do not eat, drink, smoke or sniff at the workplace. Wash hands before breaks and at the end of work. Apply skin care products after work. Wash contaminated clothing prior to re-use.

                                                                                          gloves                suit                

                                                                                            Gloves                       Suit                          

  

 

Form         Liquid
Colour Clear
Odour characteristic
Boiling point and boiling range  100 - 105 °C
Flash Point 100°C
pH Acidic
Flammability (solid, gas) No data available
Upper explosion limit No data available
Lower explosion limit No data available
Explosive properties No data available
Vapor pressure No data available
Relative vapor density No data available
Relative density 1.14 - 1.17 g/cm³
Water solubility Unlimited
Solubility in other solvents No data available
Partition coefficient: octanol No data available
Viscosity 50 mPas (20 °C)
Explosive properties No data available
Oxidizing properties No data available
Molecular weight No data available
Melting point / melting range:  -10 °C

 

Conditions to avoid:                                      None
Dangerous reactions A slow reaction with some metallic surfaces might occur. 
  No dangerous reaction known under conditions of normal use.
  Avoid to contact with strong acids
Avoid to contact with oxidizing agents.
Store away from aldehydes.
Hazardous Decomposition

Carbon dioxide. Carbon monoxide. Nitrogen oxides (NOx).phosphorus oxides
Materials to avoid None

 

Specific symptoms from animal test

Acute toxicity, oral (LD50): Rat > 5000 mg/kg Acute toxicity, dermal (LD50): Rabbit > 5000 mg/kg.
Route of Exposure Inhalation, Eye contact, Skin contact
Eyes                                     Not an irritant.
Skin Not an irritant.
Ingestion  Causes digestive tract burns
Effect after repeated or prolonged exposure There are no data available on the preparation/mixture itself.
Sensitization There are no data available on the preparation/mixture itself.
Acute toxicity There are no data available on the preparation/mixture itself.

CMR effects (carcinogen, mutagenic and toxicity for reproduction)

 There are no data available on the preparation/mixture itself.
Additional information There are no data available on the preparation/mixture itself.
General remarks

According to our experience and the information available to us, the product has no negative impact on health.


 

Ecotoxicity:

Acute fish toxicity (LC50): Oncorhynchus mykiss (Rainbow Trout) > 290 mg/l (96 h) Bacterial toxicity (EC0): n.a.
Mobility:                                                    There are no data available on the mixture itself
Persistence and Biodegradation:

Technically correct releases of minimal concentrations to adapted biological sewage treatment facility will not disturb the biodegradability of activated sludge
Bioaccumulative potential      There are no data available on the mixture itself.
Results of PBT assessment There are no data available on the mixture itself.
Other harmful effects There are no data available on the mixture itself.
Mobility  There are no data available on the mixture itself.

 

Contaminated packaging: 

Cleaned and empty containers may be recycled. Handle contaminated packaging in the same way as the substance itself.
Additional information Waste disposal according to official state regulations.
General information

Can be incinerated together with household waste in compliance with official regulations after consulting approved waste disposal companies and authorities in charge.
Waste Code

The assignment of waste codes / waste designations is done according to the European directory of waste codes (AVV) and to specific processes. The final user must redefine and assign the most appropriate Waste Catalogue Code

 

Overland transport (ADR/RID)                                       

Technical name:  Scale Inhibitor Antiscalant 9000 
Not classified as a dangerous good under transport regulations
Transport by sea (IMDG)

Proper Shipping name: Not classified as a dangerous good under transport regulations
Air transport (ICAO-TI / IATA-DGR) 

Proper Shipping name: Not classified as a dangerous good  under transport regulations

Water Hazard Class 1 Slightly water polluting substance
Classification Product is classified and labelled in accordance with EC regulations or the corresponding national laws.
National regulations Moreover, national legislation has to be observed!
Storage class 12 Non-flammable liquids

 

Other

Information

The information above is believed to be accurate and represents the best information   currently available to us. However, we make no warranty of merchantability or any other warranty,  express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make  their own investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses,  or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising,  even if Rx Marine International has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top