/ / / STICK N SOL – Removing Label

Shop

STICK N SOL – Removing Label

​ ​ ​

Fully active cleaner specially formulated for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor perfor

SKU: RXSOL-15-1017-025 Category: Tags: , , , , , , , , , , , , , , , , ,

Description

REMOVING LABEL ::: very effective to remove sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass, Cleans and removes adhesive caulking and bedding compounds, Cleans glue residues, resin, and hardener.

Fully active cleaner specially formulated  for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing  which can cause mechanical damages to discs and result in poor performance. Field test have shown that RXSOL-15-1017 is very gentle with personnel and on metallic colour surface.“RXSOL-15-1017” should always be used at full strength to obtain maximum benefits.

RXSOL-15-1017 is a unique formulation of powerful surfactants and  organic solvents.It does not contain any chlorinated solvents of Phenols & has less than 10% Aromatics & surfactants in the product do not contain any alkyl phenol ethoxylates.

Trick ::  Before peeling off the label, use a hair dryer to soften the adhesive. The label will probably come off cleanly, but if it leaves a sticky residue, wait for the piece to cool and try removing it with some RXSOL-15-1017 on a soft paper towel or cotton ball. Any residue remaining after using RXSOL-15-1017 should be removed with RXSOL  Multi-Surface Cleaner with Vinegar. 

Email Tempelate ::: http://www.kirantiwari.com/sticknsol/index.html

Same Family PRODUCT :::  http://www.rxmarine.com/BIOSOL






Product Details

Application

Product Uses:-STICK-N-SOL “RXSOL-15-1017”  is a fully active cleaner specially formulated  for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing  which can cause mechanical damages to discs and result in poor performance. Field test have shown that “RXSOL-15-1017” is very gentle with personnel and on metallic colour surface.“RXSOL-15-1017” should always be used at full strength to obtain maximum benefits.

 Product-Application:- Manually apply “RXSOL-15-1017”neat by brush or hand spray. Allow few seconds contact time to penetrate the soiled / covered area, then sticker will come up by smooth way.

Dosage & Procedure

Cleaning time  will vary depending on the extract nature and thickness of deposit  to be removal. Stubborn deposits should be scrubbed to assist the cleaning operation. Your local Rx CLEANSERS representative will work with you to design the optimum  concentration & procedure for your system.

Technical Specifications

Product Properties:-

Product Name 

STICNSOL (Wetting  EmulsifyingAgent )

Active Matter                    

100%

 

Consistency  

Liquid

 

Emulsifying Property       

Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , TETRA CHLOROETHYLENE ( PC )

 

Wetting Property        

Good Wetting & Emulsifying Property

 

Ionic Nature                     

Non-Ionic

 

Colour    

Pale Yellow

 

Appearance

Clear liquid

 

Odour                 

Pine based

 

Moisture

0.5 % (max)

 

Density

In g/cm3 at 15°C: 0.89

 

Flash Point

(PMCC)°C: Above 108

 

Compatibility

 

 

Metal

No known effect

 

Rubber

May swell

 

Synthetic rubber

May swell

 

PACKAGING

Order No

Size (in litres)

 

RXSOL-15-1017

 5,25 , 35

Notes & Precautions

Characteristics:- 

  • Unique chemical formulation.
  • Non- toxic.
  • Extends time between cleans.
  • Safe to handle.
  • Effective removal of STICKER/CARBON DEPOSITS.
  • Can be applied by all normal methods.
  • Formulated to be very cost effective.
  • Does not contain chlorinated hydrocarbons.
  • Can be used on all metals & most painted surfaces.
  • Environmentally friendly.
  • Non-Corrosive.
  • 100% Active.
  • Dries Completely.
  • Does not require special feeding equipment for safe application.
  • Reduce downtime and maintenance costs. 

Generic / Chemical Name

Sticker Remover Gum Dissolver

Supply Locations

STICK N SOL - Removing Label - Sticker Remover Gum Dissolver manufacturer and supplier in Mumbai, Visakhapatnam, Kolkta, Chennai, Gandhidham, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, UAE Middle East, Oman Muscat, Barka Sohar, Kenya Nairobi, Jinja, Uganda, Canada

Safety Data (MSDS)

Product Name

STICK N SOL 
Product Type RXSOL-15-1017-025


Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

BRANCH STOCK POINT : Mumbai, Kandla, Chennai, Visakhapatnam, Chennai, Kolkata, Fujairah, Muscat, Nairobi, Canada

Phone +91 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email mail@rxmarine.com


PRINCIPLE HAZARDOUS INGREDIENTS:              OSHA PEL
Glycol Ether DB (CAS # 112-34-5)                             N/A
Acetone (CAS # 67-64-1)                                          1000 p.p.m.
Isopropyl Alcohol (CAS # 67-63-0)                             400 p.p.m.
Orange Oil (CAS # 5989-27-5)                                    N/A
Proprietary                                                                   N/A

Route(s) of entry Eyes: yes Skin: Yes Inhalation: Yes Ingestion: Yes
Health Hazards: Eyes – May cause irritation.
Skin – May cause irritation.
Inhalation – Excessive exposure may cause respiratory irritation
Ingestion – Large amounts may be harmful
Carcinogenicity: NTP: Known – No; Anticipated – No OSHA: TLVA4 for Acetone & Isopropyl Alcohol IARC: No

Eyes: Flush thoroughly with water for 15 minutes. Get medical attention.
Skin : Flush thoroughly with water for 15 minutes. Get medical attention.
Inhalation: Move to fresh air. Get medical attention if irritation occurs.
Ingestion:Do not induce al vomit unless directed to do so by medical personnel. Get medical attention if irritation occurs.

Boiling Point: 178 ° F
Extinguishing Media: Use water, carbon dioxide, dry powder or other media appropriate for materials actually involved in fire.
Special Fire Fighting Procedures: In the event of a fire, wear full protective clothing and NIOSH-approved, self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Unusual Fire and Explosion Hazards: None

SMALL SPILL: Absorb liquid on inert material such as vermiculite, and dry sand.
LARGE SPILL: Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Stop spill at source, contain area of spill to prevent spreading, pump liquid to salvage tank. Remaining liquid may be absorbed with inert material such as dry sand, vermiculite, and shoveled into containers. Prevent run-off to sewers, streams, or other bodies of water. If run-off occurs, notify the proper authorities as required that a spill has occurred.

Store out of reach of children. Keep container tightly closed as acetone tends to volatize out of even sealed bottles over time. . Store in a cool, dry location. Avoid freezing or extended storage in high temperatures.

Airborne Exposure Limits: None established.
Ventilation System: Room ventilation is normally satisfactory. Mechanical  assist may be required when vapors or mist are generated.
Personal Respirators:   For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH approved) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection:  Use chemical safety goggles.

Odor : Orange
Physical State: Liquid.
Appearance: Clear
pH : N/A
Specific Gravity: 0.912 g/mL

Boiling Point:

 182 ° F
Freezing/Melting Point: N/E
Vapor Pressure: N/E
Vapor Density: N/E

Solubility in Water:

 Miscible

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition or Byproducts: Exposure to fire may liberate carbon dioxide, carbon monoxide, and other unidentified thermal decomposition products from this product or its packaging.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acid materials and strong oxidizing materials.
Conditions to Avoid: None known

Acetone - Oral Rat LD50: 5800 mg.kg. Inhalation Rat LC50: 100 mg/m3, irritation eye rabbit,
standard draize, 20 mg severe; investigated as a tumorigen, mutagen, reproductive effector.
Glycol Ether DB -Oral Rat LD50: 7,292 mg/kg Dermal Rabbit LD-50: 2,764 mg/kg
Skin Irritation (rabbit) slight Eye Irritation (rabbit) moderate

Environmental Fate: .Acetone readily biodegrades.
Environmental Toxicity: Acetone not toxic to fish. Glycol Ether DB Acute Aquatic
Effects Data: 24 h LC-50 (goldfish): 2700 mg/L 96 h LC-50 (bluegill sunfish): 1300 mg/L

 

Do not dispose of on the land, in surface waters, sewers or in storm drains. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations. All disposal must be in accordance with all federal, state and local regulations.

Ground Transportation: Limited quantity exception applies for each box containing 12 pints. Requires a limited quantity label.
Air Transportation: With a vented seal/cap, this item cannot be shipped via air in accordance with CFR 49 173-24(g).
Maritime Transportation: UN1993; Flammable Liquid, N.O.S., (Acetone); 3: II.
Check regulation for limited quantity exceptions.

Acetone (CAS # 67-64-1) CERCLA, SARA 313
Glycol Ether DB (CAS # 111-76-2) SARA 313
Isopropanol (CAS #67-63-0 <2%) MASS, NJHS, NRC, OSHAWAC, PA, SARA 313,
TXAIR, WHMIS 1%
All components are listed on TSCA
CERCLA = Comprehensive Environmental Response, Compensation, and Liability Act
MASS = Massachusetts Hazardous Substance List
NJHS = New Jersey Right-to-Know Hazardous Substances
NRC = Nationally Recognized Carcinogens
OSHA WAC = OSHA Workplace Contaminants
PA = PA Right-to-Know List of Hazardous Substances
SARA 313 = SARA 313 Title III Toxic Chemicals
TXAIR = Texas Air Contaminants with Health Effects Screening Level
WHMIS = Workforce Hazardous Material Information System

This product has no established regulatory information. All regulatory information given is based on individual components of the mixture by component number. While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy. 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top