Neutral Liquid for prevention of scale in seawater Evaporators
VapourTreatment For controlling of Scale & Foam ::: Neutral Liquid for prevention of scale in seawater Evaporators
This is a highly Active Antifoulant, Water Scale Inhibitor, Dispersant and Anti-precipitant compound for use in industrial and Marine Water systems, such as cooking systems, Heat Exchangers, air conditioning equipment, etc.
Procedure Of Use and Dose Rates: POLYELECTROLYTE polymer of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evaporator line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.
Used in both high and low pressure evaporators.
Dosage :
| Daily Out Put Evaporator | Daily RXSOL VT 6001 Requirement |
| 10 -20 MT | 100-200 ML |
| 30-40 MT | 300-400 ML |
| 50-60 MT | 500-600 |
Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting i.eThis will last 24 hours.
Note: We can remove existing mineral scale deposits by using A 5-10% solution of RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).
| CharactersItics | Properties | |
| Appearance Thermal Firmness | Clear yellow liquid 250° C | By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency. |
| Density | In g/cm3 at 15°C: 1.1 |
Permits more efficient evaporation. |
| pH (1 Vol%) | 9 |
Reduces downtime and maintenance costs. |
| Compatibility | Concentrated, safe liquid, easy and economical dosing. | |
| Metal | No known effect |
For use in both high pressure and vacuum evaporators |
| Rubber | No known effect | The antifoaming properties ensure that distillate quality is high |
| Packaging |
20 / 25 ltr |
Improves the quality of distilled water |
Evaporator Treatment Chemicals to protect deposition of SCALE in fresh water generator. RXSOL Vapor Treatment is effective and concentrated ANTI-SCALE for water generator system. Improves the quality of distilled water.
Evaporator Treatment is used to stop scale buildup in high and low pressure evaporators system.
VAPT REAT Evaporator Treatment Chemicals supplier in Mumbai, Kandla - Deen Dayal Upadhyay Port, Gandhidham, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Ajman, AbuDhabi - Middle East - UAE., Nairobi Kenya Africa, CANADA, Ruwi Barka Muscat Oman
Why Evaporator Treatment Chemicals must use?
PREVENTION OF SCALING IN SEA WATER EVAPORATORS.
RXSOL Vapor Treatment Prevents scale formation at temperatures up to 160°C Also Reduces foaming and maintains optimum plant performance.
RXSOL-51-6001-025 is identified as VAPTREAT / Vapor Treatment, a specialized evaporator treatment chemical for controlling scale and foam in seawater evaporators and fresh water generators. It is a concentrated polymer-based antiscalant and antifoulant designed for marine and industrial water systems. (rxsolgroup.com) (rx-sol.com)
RXSOL VAPTREAT is a neutral liquid treatment formulated with polyelectrolyte polymers and antifoaming agents to prevent scale formation and control foaming in seawater evaporators. It helps maintain clean heat transfer surfaces, improves evaporator efficiency, and ensures high-quality distilled water production. (rxmarine.com)
✔ Prevents scale formation in evaporators
✔ Controls foaming during distillation
✔ Improves distilled water quality
✔ Enhances heat transfer efficiency
✔ Reduces maintenance and downtime
✔ Suitable for both high and low-pressure evaporators
Fresh Water Generators (FWG)
Seawater Evaporators
Marine Distillation Plants
Heat Exchangers
Industrial Water Systems
10–20 MT/day output: 100–200 ml/day
30–40 MT/day output: 300–400 ml/day
50–60 MT/day output: 500–600 ml/day (rx-sol.com)
| Product Name | RXSOL ET 6001-025 |
| Product Type | VAPTREATSOL |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Muscat
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Sodium Acrylate |
10-30 |
25085-02-3 |
N/A |
- |
- |
|
Sodium Gluconate Mixture |
10-20 |
|
|
|
|
| EDTA Blend | 5-10 | ||||
| Proprietary Blend of various Phosphonate | 20-25 |
*See Section 16
|
Odour |
Odourless |
|
Appearance |
Liquid, pale yellow, soluble in water |
|
Contact with eyes |
Mildly irritating to eyes |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Ingestion |
May cause gastrointestinal disturbances |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical attention if irritation persists |
|
Contact with eyes |
If the substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Seek medical advice |
|
Ingestion |
Never make an unconscious person vomit or drink fluids Give water or milk to drink When in doubt or symptoms persist, seek medical attention |
|
Inhalation |
is unlikely to occur Remove patient to fresh air |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) |
- Non combustible
- Smoke from fires is irritating
- Not flammable. In case of fire use extinguishing media appropriate to surrounding condition
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
No special precautions are required for this product. |
|
Immediate Actions |
Shut off the source of leak if safe to do so. |
|
Clean Up Actions |
Flush spill area with copious amounts of water. |
|
See SeSpecial Precautions |
Wear protective clothing as per section 8 No special precautions are required for this product. |
|
Handling |
The usual precautions for handling chemicals should be observed |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49 |
|
Exposure Limits |
There are no recommended or established controls for this product. |
|
Exposure controls |
No special precautions are required for this product. |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended). |
Gloves Suit Goggles
|
Odour |
Odourless |
|
Appearance |
Liquid, colouless or pale yellow, soluble in water |
|
pH |
8.5 - 10 at 100 % concentration |
|
Boiling point |
>100 °C at 760 mm /Hg |
|
Vapour pressure |
not known |
|
Freezing point |
<0 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
1.08 |
|
Non |
combustible |
- No hazardous decomposition products known
- Avoid overheating, Keep away from frost
|
Toxicological information |
LD50 (dermal) : > 10000 mg/kg No effects in humans. |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. |
|
Contact with skin |
In cases of severe exposure, redness and irritation may develop. |
|
Contact with eyes |
In cases of severe exposure, redness may develop. |
|
Ingestion |
In cases of severe exposure, gastro-intestinal disturbances may develop. |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Ecotoxicity |
On available data, the substance is not harmful to aquatic life LC50 (bluegill sunfish) 4750 mg/l (96 hr) (Sodium acrylate). |
|
Mobility |
Completely soluble in water. |
|
Persistence and Biodegradability |
Most components in this product are not readily biodegradable. Sodium polyacrylate: Chemical oxygen demand (COD) 0.4 g/g Biological oxygen demand (BOD) 0.009 g/g. |
|
Bioaccumulation Potential |
Bioaccumulation is insignificant. |
|
Other Adverse Effects |
Presents little or no hazard to the aquatic environment. |
|
Classification |
EU Waste class. |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation. |
- Not classified as hazardous for transport
|
Classification and labelling |
Not classified as hazardous for users |
|
Risk Phrases |
Not applicable |
|
Safety Phrases |
Not applicable |
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituentsThe data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer .
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
