/ / / Corrosion Scale Inhibitor Boiler Treatment

Shop

Corrosion Scale Inhibitor Boiler Treatment

​ ​ ​

Corrosion and Scale Inhibitor with Phosphates and Polyphosphates.

SKU: RXSOL-42-4029-025 Category:

Description

Corrosion Scale Inhibitor Boiler Treatment is a high-performance liquid treatment, specially engineered with phosphate polymers for application in steam boilers.

Formulated for systems utilizing softened make-up water, AquaShield B64 effectively disperses iron and phosphate sludge, ensuring clean and efficient boiler operation.

The advanced polymer blend promotes the transport of calcium, magnesium, iron, phosphate, and silica through the boiler system, preventing the formation of stubborn deposits.

By minimizing scale and sludge buildup, AquaShield B64 helps extend steam production cycles, enhances heat transfer efficiency, and reduces the risk of tube overheating and associated maintenance downtime






Product Details

Application

Corrosion Inhibitor OPEN Cooling System  scientifically formulated to keep clean open recirculating systems  and also prevent from scale formation . Chemically Corrosion Inhibitor OPEN Cooling System  will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments. 

Excellent scale inhibition for a variety of applications including cooling circuits, boilers and RO units.

It is widely used in Boilers, cooling water and membranes

Dosage & Procedure

  • Dosage (ppm) = (Feedwater Hardness × F) + (Feedwater Iron × 20)

  • Select Factor F based on boiler pressure:

Use F = 23 for boilers up to 30 bar.

Most industrial and utility boilers globally operate between 10–40 bar (low to medium pressure steam production).

F = 23 works well for boilers using softened feedwater, which is very common internationally.

Even for pressures slightly above 35 bar (up to 45 bar), using F = 24 still keeps treatment safe and effective without under- or overdosing.

 

Manage Phosphate reserve after dosing the product as per below:

Boiler Pressure Phosphate Reserve
0–20 bar 30–70 ppm
21–40 bar 20–50 ppm
41–60 bar 20–40 ppm
61–70 bar 15–30 ppm

 

Maximum pressure limit for this product is 60 bar.

 

OR Simply follow the below Directions for Use of RXSOL Corrosion Inhibitor to prevent corrosion acid attack and scaling in your boiler

RXSOL Boiler Corrosion Scale Treatment should be fed continuously in order to properly protect the boiler. Boiler Corrosion Scale Treatment can be fed neat or in any convenient dilution made up in soft water or cooled condensate. Boiler Corrosion Scale Treatment should be dosed using individual chemical dosing unit, must not be mixed with oxygen scavengers or condensate system corrosion inhibitors in concentrated form (e.g. concentrated chemical products should not be mixed together).

Sampling and Testing
Boiler Corrosion Scale Treatment is normally used in conjunction with RXSOL Alkalinity Control treatment in a conventional alkaline phosphate treatment programme for HP boilers, where independent control of phosphate and alkalinity control is required.

Dosing and Control
The dosage of Boiler Corrosion Scale Treatment depends on a number of operational factors such as feed-water quality, boiler design and steam rate. Control of Boiler Corrosion Scale Treatment is by a simple test to give the required level of phosphate (as PO4) in the boiler water. A simple Hardness Treatment test kit is available for this purpose. NOTE: Dependent on water quality, Boiler Corrosion Scale Treatment dosed at 0.25 liters/ton will increase the phosphate reserve by the order of 10mg/l.

Technical Specifications

Appearance Paly Yellow, Clear liquid
Density 1.01-1.1
Boiling Poitnt  100 degree celcius
pH Alkaline

 

Not Compatible : Aluminium, Copper, Copper Alloys, Nickel, Neoprene, Polyurethane.

Notes & Precautions

Features and Benefits of Corrosion Scale Inhibitor Phosphate based for Boiler Systems
  • Phosphate-Polymer Blend: Combines the proven benefits of phosphate treatment with advanced polymer technology for superior boiler protection.
  • Effective Sludge Control: Disperses iron and phosphate sludges, preventing buildup and blockages.
  • Enhanced Scale Prevention: Efficiently transports calcium, magnesium, iron, phosphate, and silica through the system to avoid deposit formation.
  • Optimized for Softened Water: Specially designed for steam boilers using softened make-up water.
  • Liquid Formulation: Easy to handle, dose, and integrate into existing treatment programs.
  • Compatible with Boiler Metallurgy: Safe for use across a wide range of boiler materials without risk of corrosion.
  • Increases Steam Production Efficiency: Minimizes scaling and deposits, ensuring uninterrupted heat transfer and maximizing operational performance.
  • Extends Boiler Life: Reduces the risk of tube overheating and mechanical failure, prolonging equipment life.
  • Lowers Maintenance Costs: Prevents the formation of adherent deposits, reducing the frequency of cleaning and unscheduled shutdowns.
  • Improves Operational Safety: Maintains boiler cleanliness, helping to avoid dangerous overheating and pressure issues.
  • Reduces Chemical Consumption: Highly efficient formulation requires lower dosages compared to conventional treatments.
  • Simplifies System Management: Liquid formulation ensures easy and accurate dosing with minimal handling risks.

Active Matter

54-63

Generic / Chemical Name

Phosphate and Polyphosphate based Corrosion and Scale Inhibitor

Supply Locations

Corrosion Scale Inhibitor Boiler Treatment manufacturer and supplier in Mumbai, Turbhe Pawana MIDC, Gandhidham, Visakhapatnam, Chennai Ennore, Kolkata, Haldia, Ajman, Fujairah, Dubai, Sharjah, Dubai, Muscat, Oman, Sohar, Barka, Canada, SUDAN, Yemen

Safety Data (MSDS)

Product Name : Corrosion Scale Inhibitor Boiler Treatment
Product Code : RXSOL-42-4029-025
Revised Date : 10-04-2022

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
STOCK Point : Fujairah, Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Muscat, Nairobi

Phone : +91 22 27815541 / 42
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

Chemica Name Concentration CAS Number
PolyPhosphates 10-30 10361-03-2
OrganoPhosphates 1-5 115-26-4
PolyAcrylates 2-5 9003-04-7
Zinc Sulphate 10-30 7446-19-7
Proprietory Blend of Corrosion and Scale inhibitors 30-60 -------------

*See Section 16

Odour Odourless
Appearance White powder
Contact with eyes May cause pain
Contact with skin In cases of severe exposure, severe irritation may develop
Inhalation Vapours or aerosols may cause irritation of eyes, nose and respiratory tract
Ingestion Toxic if swallowed (R25)

Contact with skin Remove contaminated clothing immediately and drench affected skin with plenty of water
Contaminated clothing should be laundered before reuse When in doubt or symptoms persist, seek medical attention
Contact with eyes If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes
Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention
Ingestion Never make an unconscious person vomit or drink fluids Give water or milk to drink Induce vomiting (only if patient is conscious) Obtain immediate medical attention
Inhalation Inhalation is unlikely to occur Remove patient to fresh air When in doubt or symptoms persist, seek medical attention
General In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

-  Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-  Substance evolves toxic fumes, wear self-contained breathing apparatus

Personal Precautions Wear protective clothing as per section 8
Immediate Actions Use appropriate containment to avoid environmental contamination (S57)
Clean Up Actions Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete.
Special Precautions Wear protective clothing as per section 8

Handling

Wear protective clothing as per section 8 Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available
Storage Keep only in the original container in a cool, well ventilated place (S3/9/49)
Protect from heat

Exposure controls No special precautions are required for this product
Occupational exposure controls Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended)

gloves                     goggles                  suit                   

Gloves                          Goggles                        suit                    No_Smoking

Odour Odourless
Appearance Liquid
pH 12-13
Boiling point not known
Vapour pressure not known
Vapour density not applicable
Freezing point not known
Completely soluble in water
Specific gravity (water=1) >1.1

-   This article is considered stable under normal conditions
-   Avoid contact with acid
-   Incompatible with acid, Contact with acids liberates toxic gas (R31)
-    See Section 5

Toxicological information No experimental data available
Inhalation Not applicable
Contact with skin In cases of severe exposure, severe irritation may develop
Contact with eyes May cause severe irritation
May cause pain
Ingestion Toxic if swallowed (R25)
Carcinogenicity No evidence of carcinogenic effects

Mobility Completely soluble in water
Persistence and Biodegradability Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable.
Bioaccumulation Potential Bioaccumulation of the components in this product is insignificant.
Other Adverse Effects No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment.

Disposal considerations Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation

 -  Not classified as hazardous for transport

Classification and labeling

Contains Benzothiazol-2-thiol.  May produce an allergic reaction.Cooling Water Treatment 15 Regulatory information
Risk Phrases Toxic if swallowed (R25)
Safety Phrases Wear suitable protective clothing, eye/face protection and gloves (S36/37/39)
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) This material and its container must be disposed of in a safe way (S35)

Text of R and S phrase codes used  in  this safety data sheet:-  R25: Toxic I f swallowed;  R43: May  cause  sensitisation by  skin  contact;   The  information  provided  about  the product  on  this  Safety  Data  Sheet  has  been  compiled  from knowledge of the individual constituents.The data given here  is  based  on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safetyr equirements   and   does   not   signify  any   warranty   with  regard  to  the  product's  properties  The  data  given  here  only  applies  when  product  used for proper application(s). The product  is  not  sold  as  suitable for  other applications  -   usage   in  such  may  cause  risks  not   mentioned   in   this  sheet.  Do  not  use  for  other application (s) without seeking advice from manufacturer.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top