Description
Coldwash degreaser supplier and exporter. Coldwash easily emulsifies oil grease from engineering and rigs platform and surface.
Cold Washer HD
Heavy duty highly concentrated and economical emulsifier. Safe to use on most metal surfaces, painted and coated surfaces and also used as a multipurpose degreaserin extremely hard cleaning conditions.
Product Details
Application
Ready to use for tank cleaning or general degreasing.
Complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , Lube oil, soot , asphalt ,paraffine, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
PROEDURE OF USE :
|
SPRAY METHOD |
Mix 1 part of RXSOL-20-2003-210 with 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-20-2003-210 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water |
|
Immersion Method |
Application in immersion process with or without ultrasonic support, manual wipping. |
|
RE-circulation Method |
RXSOL-20-2003-210 is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER. |
Dosage & Procedure
Refer to technical datasheet.
Technical Specifications
| Appearance | Clear amber brown liquid | |
| Density | In g/cm3 at 15°C: 0.95b | |
| Flash Point | Above 70°C ( on dilution with water more than 90°C ) | |
| Compatibility | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| PACKAGING | Order No: RXSOL-20-2003-210 |
Size (in litres): 25,/30,/210 |
Notes & Precautions
Advantages :
RXSOL-20-2003-210 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration
Active Matter
85 - 90 %
Generic / Chemical Name
Degreaser for Oil Grease Rigs Platform
Supply Locations
Cold Washer HD manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Cold Washer HD at a competitive price from us. We have ready stock of Cold Washer HD in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Safety Data (MSDS)
| Product Name | RXSOL-20-2003-210 |
| Product Type | COLD WASH HD |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
- Chemical characterization
- Description: Mixture contains: Emulsifiable liquid of Naptha ( 20 to 30% ) Along with Butoxyethanol ,
- Emulsifying agents as surfactants, FattyAcid & alcohal derivative
-
(biodegradable substance 85 to 90%) and Ethoxylate . And with harmless addition.
*See Section 16
Harmful
|
Environmental Hazards |
None |
|
Human Health Hazards |
Moderates , may cause lung damage if swallowed |
NOTE : Person-related safety precautions required.
|
After inhalation |
On Inhalation move to fresh air / Arificial respiration . Get medical attentionin case of symptoms . |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating , Protective clothing require |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing ( On persistent symptoms ) |
Harmful, if ingested,Do not induce Vomiting. Get medical attention. |
Extinguishing Media :- Cool endangered container with water
|
A. Suitable |
Foam ,dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable |
Direct water jet on larger fire Protection of fire FighterProtection of fire Fighter Masked with Air Respirator
Care for environmental protection
Prevent material from reaching sewage system, holes and cellars. Dilute with much water.
PROCEDURE for cleaning/collecting Remove RXSOL-20-2003-210 with absorbent materials or mechanically . And dispose accordance with section , Then flush with water and ventilate well. NOTE : Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust , oil adsorbent).
|
Handling |
Eyewash facilities require at workplace |
|
Storage |
General Storage , container should be tightly. Protect from direct sunlight and heat flames. Methods of cleaning Flush Spill Area with Water |
|
Enviromental Precaution |
Readily Bio-Degradable , missible with water , low toxicity , No environmental problem on correctly usage. |
|
Personal Protection |
Respiratory System Protection-Breathing equipment Not required Eye Protection - wear eye protection (on possibility of contact) |
NOTE :The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. Keep away from foodstuffs, beverages and food. Protection of hand ,Protective gloves , wash hand after touch.Eye protection Tightly sealed safety glasses
Gloves Suit Goggles No_Smoking
| Product Properties | ||
| Appearance | Clear pale liquid / Low viscous | |
| Odor | Characteristic / Odorless | |
| Density | In g/cm3 at 15°C: 0.89 | NOTE :SHELF LIFE 5 YEARS |
|
Boiling Point Flash Point Flammability Explosive Solubility in Water |
MATERIALS BOILS AT 160°C 70 °C Not self Igniting Not Explosive 100% soluble fully miscible |
EFFICIENCY |
| Compatibility | A. SEA WATER 70% | |
| Metal | No known effect | B. FRESH WATER 84% |
| pH | 6 +0.5 | |
| PACKAGING | Order No. | Size (in litres) |
| RXSOL CW 2003 | 25,210 |
Condition to Avoid Heat, Flame and Other Sources of Ignition Materials to Avoid Do not subject to Reducing /Oxidizing Agents. Hazardous Decomposition Products:Do not occur NOTE : No decomposition if used according to specifications.
|
Skin Irritation |
irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable |
Readily biodegradable Water hazard class 2 (self-assessment): hazardous for water. Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil.
This material must be disposed with local national regulations. Product Recommendation ( Recommended cleaning agent water ) Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations
• Marine pollutant: No
• Transport/Additional information
•Hazard designation of product: Xi Irritant.
•Irritating to eyes and skin.
•Safety phrases• National regulations
|
2 |
Keep out reach of childrenIf swallowed, seek medical attention immediately |
|
22 |
Harmful if swallowed |
|
26 |
In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. |
|
23 |
Do not Breathe |
|
27 |
After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly. |
|
41 |
Risk of serious damage to eyes |
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.Department issuing data specification sheet Environment protection department.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
