/ / / Carbon Cleaner LT

Shop

Carbon Cleaner LT

​ ​ ​

CARBON cleaner is very active which eliminates the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor performance.

SKU: RXSOL-16-1075-025 Category: Tags: , , , , , , , , , , , , , , , , , , ,

Description

Carbon Remover LT  is a non-corrosive, powerful solvent for removal of carbonaceous deposits. Carbon Remover LT contains no chlorinated solvents or phenolic compounds and has low toxicity to the environment and to persons handling it.  ::: ( This product is WATER INSOLUBLE )  

 

Our Other Valuable grade of CARBON REMOVER :::

A) Carbon Remover Part No. – RXSOL-16-1003-025 ::: Specifically formulated for removal of completely carbon, grease, oil, varnishes and other heavy deposits from diesel engine. RXSOL-16-1003-025 is a highly concentrated Wetting Emulsifying Agent which makes this product water soluble.  ( This product is WATER SOLUBLE )

This powerful action is based on a two –Layer mechanism. The top-layer prevents the evaporation of the volatile components in the button-layer. The button –layer removes the deposited substances. This way, the deposits are bind and trapped resulting to complete and safe removal.

CARBON cleaner is very active which eliminates the need for Scrubbing or Brushing  which can cause mechanical damages to discs and result in poor performance.

A)Decarbonizer Predator Carbon Cleaner Part No. – RXSOL-16-1699-025 ::: Fast Effective Liquid degreaser and decarbonizer, Its immediate action of solvent makes it very popular and easy to use. Plesant Smell based and its specialization is water-rinseable gives complete cleaning effect. ( This product is WATER INSOLUBLE )  






Product Details

Dosage & Procedure

This is an effective way of cleaning deposits from machine parts. The items to be cleaned are dipped into the solvent. A wire basket can be used for small components. For removal of light deposits or oil, a dilution of up to 1:2 in fresh water can be used. Light deposits will be removed in 1 hour, whereas heavily oxidized deposits may need overnight soaking. After the components have been removed from the soaking bath, remaining solvent is easily flushed off with water. Due to a very low evaporation rate, no precautions are necessary to prevent loss of liquid, but adequate ventilation is recommended. Cleaning the Oil Side of Heat Exchangers Where in-situ cleaning is required, Carbon Remover LT can be used neat and circulated through the unit in question. Time required for this process will again depend on extent of fouling and may take up to 24 hours. recommended to be used.

  • Disconnect the heat exchanger's oil inlet and outlet, drain off any remaining oil.
  •  Connect the discharge side of the Chemical Cleaning Unit (CCU) to the lower heat exchanger connection and fit the return to the CCU.
  •  Add Carbon Remover LT to the drum and heat, maintaining the temperature (max 60°C), throughout the cleaning operation. If heat is not available the cleaning time will need to be extended.

Circulate for 12 hours. When the cleaning is complete, disconnect the lower heat exchange connection and

Technical Specifications

APPEARANCE

Pale yellow liquid

DENSITY, in g/cm3 at 15°C

1.0

FLASH POINT, (PMCC) in °C

Above 61

pH, in conc.

N/A

COMPATIBILITY

 

Metal

No known effect

Rubber

May swell

Synthetic rubber

May swell

Notes & Precautions

Features, Benefits and Applications

  • Reformulated with improved cleaning properties
  • Can be used for cleaning engine parts like:

-          Pistons

-          Piston rings

-          Valves

-          Valve cages

  • Does not contain nonyl phenol ethoxylates or other
  • estrogenic compounds Non-corrosive, safe on all light metals, including aluminum
  • Quickly dissolves deposits containing carbon, resins or varnishes
  • Simple and economical to use by soaking or circulation method
  •  Low toxicity
  • Low evaporation rate
  • No phenolic or chlorinated compounds
  • Can be used for removal of carbon type deposits from
  • burner tips, fuel injectors and all components fouled by

Generic / Chemical Name

CARBON REMOVER

Supply Locations

Carbon Cleaner LT manufacturer, supplier and exporter in Mumbai, Navi Mumbai MIDC, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Sharjah, Abudhabi, Dubai, Ajman, Sohar, Muscat, Barka Oman

Industry Applications

Other Valubale Marine Chemicals Manufacturer and Supplier in INDIA, UAE, Oman

Deck & Engine Maintenance Marine Chemicals :

  • Heavy Duty Degreaser - RXSOL-10-1005-025
  • All Purpose Cleaner - RXSOL-12-1501-020
  • Carbon Remover - RXSOL-16-1003-025
  • Rust Stain Remover - RXSOL-13-1096-025
  • Hand Cleaner Paste - RXSOL-16-1001-001

Ship Hold & Tank Cleaning Marine Chemicals:

  • RXTuff High Foam - RXSOL-22-3019-210
  • Acqua Tuff High Foam - RXSOL-22-3033-210
  • Coal Remover RX Hold - RXSOL-22-2215-210
  • Metal Clean Bright HD - RXSOL-20-1011-020
  • Alkaline Safety Liquid - RXSOL-20-2005-026
  • Enviro Degreaser Cleaner - RXSOL-20-3001-025

Safety Data (MSDS)

Product Name RXSOL-16-1075-025
Product Type Carbon Cleaner LT

Company Details:

RX MARINE INTERNATIONAL
105, A wing  , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat 

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Chemical Name    

Concentration    

 CASNumber    

 ECNumber   

RPhrases*  

Symbols

1,2-Dichlorobenzene

30-60 

95-50-1

202-425-9

22, 36/37/38, 50/53

Xn, N

Xylenol   

10-30    

1300-71-6

215-089-3

24/25, 34, 51/53

T, N

Kerosine, unspecified

10-30

64742-94-5

265-198-5

65, 66, 51, 53

Xn, N

Naphtha(petroleum),  

10-30

64742-82-1

265-185-4

65, 66

Xn

2-BUTOXY ETHANOL

ppm 20 ppm

 

111-76-2 50

 

 

Ammonium Hydroxide

50 ppm - 20 ppm

 

1336-21-6

 

 

Ethyl Alcohol

1000 ppm

 

64-17-5

 

  
 

*SeeSection16


 
irritant
 
Irritant
 

Odour

Unpleasant odour, Strong smell of phenol

Appearance

Liquid, brown, dispersible in water

Contact with eyes

Can cause damage to the eyes

Contact with skin

Causes burns (R34), Toxic in contact with skin and if swallowed (R24/25)

Inhalation

May cause sever eirritation, May cause  dizziness, confusion, headache or stupor, In cases of severe  exposure, anaesthesia may develop

Ingestion

Toxic if swallowed (R25) Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment (R50/53)

Contact with  skin

Remove contaminated clothing immediately and drench affected skin with plenty of water.Then wash with soap and water. Whenin doubt or symptoms persist, seek medical attention.Contamin ated clothing should be laundered befor ereuse

Contact with Eyes

If substance has got into eyes, immediately wash out with plenty of water forat least 15 minute.Irrigate eyes thoroughly whilst  lifting eyelids.Seek immediate medical attention.Continue flushing with water until medical help arrives
   

Ingestion

Never make an unconscious person vomit or drink fluids.Give plenty of water to drink.Do not induce vomiting.Seek immediate medical attention.
   

Inhalation

Remove patient to fresh air.Keep warm and at rest, in a half upright position. Loosen clothing.When in doubt or symptoms persist, seek medical attention
   

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

   
- Flash point & gt;70 deg C (CC)
- Decomposition products may include phosgene, Decomposition products may include carbon oxides
- In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43)
- Substance evolves toxic fumes, wear self-contained breathing apparatus
- Prevent  run off water from entering drains if possible
- Use water spray or fog to knock down and absorb corrosive fumes
- Vapours are heavier than air and may travel considerable distances to a source of ignition and flash back

Personal  Precautions

Wear protective clothing as per section 8.Vapours are heavier than air and may travel considerable distances to a source of ignition and flash back.

Environmental Precautions

Do not allow to enter public sewers and water courses

Immediate Actions

Use appropriate containment to avoid environmental contamination (S57)

Clean Up Actions

Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete

Special Precautions

Wear protective clothing as per section 8.Avoid release to the environment. Refer to special in structions/Safety data sheets (S61).Vapours are heavier than air and may travel considerable distances to a source of ignition and flash back

Handling

See Section 8.Eye wash bottles should be available. Avoid contact  with skin and eyes(S24/25).

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49).

ExposureLimits

TLV (TWA) 20ppm, 122mg/m3 (1,2-Dichlorobenzene)

Exposurecontrols

The undiluted product must not be used in a confined space without good ventilation

Occupational exposure controls

Wear approved  respirator if exposure likely to exceed MEL / OES . Wear goggles giving complete eye protection. Wear suitable protective clothing, in cluding eye/ face protection and gloves (neoprene or nitrileare recommended)

gloves              goggles                suit                respirator

Gloves                  Goggles                     Suit                      Respirator

Odour Unpleasant  odour, Strong smell of phenol
Appearance Liquid, brown, dispersible in water
pH 10-11 (5%in50/50 H2O-IPA mix)
Boiling point & gt 100° Cat 760 mm / Hg
Vapour pressure not  known
Vapour density (air =1) & gt;01
Freezing point <0°Cat 760mm / Hg
Insoluble in water  
Specific gravity (water=1) 1.02
Flash point & gt 70 deg C (CC) 

                         
  - This article is considered stabl eunder normal conditions, May cause rubber to swell
  - Avoid  overheating
  - In compatible with strongo xidizing substances, Contact with alkaline earth gases, Contact with alkali metals may
    forme xplosive gases
  - See Section 5    
    

Toxicological information

In cases of severe exposure, nausea/vomiting may develop

Inhalation

Causes seve re irritation

 

Has central nervous systeme ffects

 

May cause nausea/ vomiting

 Contact with skin

Canbe absorbed through skin

 

Toxic by inhalation and in contact with skin (R23/24)

 

Causes burns ( R34 )

Contact with eyes

 Causes severe irritation

 

Can cause damage to the eyes

Ingestion

Can cause damage to the digestive system

 

Toxic if swallowed (R25)

Carcinoge ni city

No evidence of carcino genic   effects

Ecotoxicity This product contains components which are classified in the EU as dangerous for the environment.
  Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment (R50/53)
Mobility Emulsifies in water
Persistence and Biodegradability Most components in this product are not readily biodegradable
Bioaccumulation Potential Hydrocarbon solvents have the potential to bioaccumilate.
Other Adverse Effects No environmental problems are expected when the product is used / handled correctly.  In its intended use, the product will not be released into the environment.



Classification:     
-  This material and/or its container must be disposed of as hazardous waste
-   EU Waste class: 07.01
Disposal considerations:
-  Do not discharge into drains or the environment, dispose to an authorised waste collection point
-  Disposal should be in accordance with local, state or national legislation

Proper Shipping Name:
UN        
  Proper Shipping Name Toxicliquid organic, n.o.s (Xylenol, 1,2-dichlorobenzene)  
  UN NO. 2810    
  Hazard Class 6.1 PackingGroup III
Road/Rail(ADR/RID)
  Proper Shipping Name Toxicliquid, organic, n.o.s. (Xylenol, 1,2-dichlorobenzene)  
  ADR UN No. 2810    
  ADRHazardClass 6.1   Tremcard       61GT1-III
Sear (IMDG)
  Proper Shipping Name Toxicliquid, organic, n.o.s. (Xylenol,1,2-dichlorobenzene)  
  IMDG UN No. 2810    
  IMDG Hazard Class   6.1       ICAO PackingGroup III
  IMDG EmS F-A, S-A IMDG subrisk: N/A
  IMDG Labels 6.1+Mar   Pollutant  
  IMDG Flashpoint >70°C    
Air(ICAO/IATA)        
  Proper Shipping Name Toxicliquid, organic, n.o.s. (Xylenol, 1,2-dichlorobenzene)  
  ICAO UnNo 2810    
  ICAO HazardClass 6.1 ICAO PackingGroup III
  ICAO subrisk N/A ICAO Labels  6.1
  ICAO Flashpoint >70°C    
DOT/ CFR(USDepartment ofTransportation        
  DOT Proper Shipping Name Toxicliquid, organic, n.o.s. (Xylenol, 1,2-dichloro benzene)  
  Hazardous Material Xylenol       1,2-dichloro benzene  
  Hazard Class 6.1 Identification Number UN2810
  Product RQ (lbs) 100     DOT subrisk: Marine Pollutant
  DOT Labels 6.1+Mar  Pollutant  
  DOT Flash point >70°C    

           
Risk Phrases :
Harmfulby inhalation(R20).Toxic in contact with skin and ifswallowed(R24/25).Causes burns(R34). Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatice nvironment (R50/53)
Safety  Phrases:
Do not breathe vapour/ fumes (S23) In case of contact with eyes, rins eimmediately with plenty of water and seek medical advice (S26) After contact with skin, wash immediately with plenty of soap and water (S 28 )If swallowed, do not induce vomiting: seek medica ladvice immediately and show this container or label ( S62 ). Wear suitable protective clothing, eye/face protection and gloves (S36/37/39).This material and its container must be disposed of as hazardous waste (S60).Avoid release to the environment. Refer to specia linstructions /Safety data sheets ( S61)     


Text of R and S phrase codes used in this safety data sheet:- 

R 22:

Harmful if swallowed;  

R24/25

Toxic in contact with skin and if swallowed;  

R34

Causes burns

R 36/37/38

Irritating to eyes, respiratory system and skin;  

R 50/53

May cause long  term adverse   effect  in   the aquatic  environment;  

R65

Harmful:  may cause lung damage if swallowed;  

R66

Repeated exposure may cause skin dryness or cracking.The information

provided about  the  product  on  this  Safety  Data Sheet  hasbeen compiled from knowledge  of  the individual constituents.The data given here is base don current knowledge and experience.This Safety Data Sheet  describes the product In  terms  of  safety requirements and does not signify any warranty with regard  to the  product's properties.The  data given here only applies when product used  for proper application (s). The product is not sold as suitable for other applications- usage in such may cause risks not  mentioned  in this sheet.  Do not  use for  other  application (s) with out seeking advice from manufacturer Composition information in accordance with Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents:

Halogenated hydrocarbons

30 %

Aromatic hydrocarbons

30  %

Aliphatic hydrocarbons

5-15 %

Anionic surfactants

5-15  %
2-BUTOXY ETHANOL * 111-76-2 50 ppm 20 ppm Yes 
AMMONIUM HYDROXID 26BE 1336-21-6 50 ppm 20 ppm Yes 
ETHYL ALCOHOL 64-17-5 1000 ppm 1000 ppm No
2-BUTOXY ETHANOL
 
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Related Products

top