Bentonite Powder

Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.

SKU: RXSOL-81-8101-050 Category:

Description

Bentonite Supplier for Oil Field Industries. It is a drilling-grade Bentonite which is naturally occurring clay. It is a High Yield Natural Sodium montmorillonite. It meets API 13A Standards. Bentonite, is a very fine grind material mostly a composite of clay minerals, especially montmorillonite which chemically describes as hydrous alumina-silicate and contains small amounts of alkali and alkali-earth metals.






Product Details

Application

• It is Viscosifier and Filtration control agent for water based Mud Systems.
• It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit.
• It is also used for clearing cat litter

Bentonite, sometimes refer as sometimes referred to as Montmorrilonite is a naturally occurring substance, composed of a number of layers, each approximately 10 angstroms thick, and each consisting of two tetrahedral and one octahedral unit. This structure is responsible for three important characteristics, the ability to absorb large amounts of moisture, the ability to exchange ions and thixotropic gel formation.
 

Bentonite Powder
We are reputed as one of the most overruling Bentonite Mineral Powder Manufacturers and Suppliers in India. The unmatched quality and efficacy of Bentonite Powder in various sectors like Drilling, Effluent Treatment, Electrical, Engineering, Fertilizer, Foundry, Iron ore Pelletization, Liquor & Food, Pesticides and Pharmaceutical has played a vital role in the enhancement of the demand. Moreover, Bentonite Clay Powder is available in varied grades.
 
Application
Drilling
Effluent Treatment
Electrical
Engineering
Fertilizer
Foundry
Iron ore Pelletization
Liquor & Food
Pesticides
Pharmaceutical

Dosage & Procedure

Bentonite can be Broadely classified in 2 grades :
 
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
 
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped through the core in to the hole, then powder would be the preferred option.
 
The greatest application of bentonite in industries is the result of its swelling property, while combine with water able to perform multitude jobs. The sodium bentonite having more water absorption capacity makes it suitable for industries like Foundry and Civil engineering application and the calcium bentonite absorb lesser than Sodium still it has some special application like cosmetics, paper, Animal feed binder as many more to describe. Swell Well Mine Chem drilling grade Bentonite is basically a sodium bentonite acquired naturally from the mines. The mineral is processed using the advanced chemical technology for drilling from ores. The below features highlights the quality of the Swell Well Mine Chem Drilling Bentonite, Offers impermeability, Provides high barrel yield. Bentonite is valued in foundry sand binding, drilling mud and sealing agent in civil engineering works, bentonite is used as a mud constituent for oil and water well drilling. Swell Chem Mine is offering Bentonite products for drilling industry. What is Drining Bentonite ? Drilling Bentonite is the Bentonite formed to be used in drilling mud or fluid.

Technical Specifications

Difference Between Sodium Bentonite and Calcium Bentonite :

Bentonite is naturally occurring hydrated Alumina Silicate, there are two main varieties, calcium and sodium, where sodium Bentonite is the more commercially important. Calcium Bentonite deposits are much more common than sodium Bentonite deposits. However, calcium Bentonite can be changed to sodium Bentonite by the ion exchange process. The swelling type or sodium Bentonite, which has single water layer particles containing Na+ as the exchangeable ion. The other has double water layer particles with Ca++ as the exchangeable ion. It is called calcium Bentonite or non-swelling type.The clay-water characteristics are of primary importance. The chemical composition of the Bentonite is a consideration only because changes in physical properties accompany changes in chemical composition. Sodium Bentonite swells or expands to a greater degree than its calcium equivalent. Small percentage of cation exchange sites are occupied by another ion, such as calcium, a state is developed in the clay which promotes both optimum swelling and fastest hydration. Sodium Bentonite has higher swelling capacity, this property develops higher viscosity in suspensions, greater state of disaggregation, formation of smaller clay particles or greater colloidal properties.

Composition of Bentonite

Percentage value

Part Number

 RXSOL-81-8101-050

 
SiO2  70,A2%
Ai2O3  15.9,A1.5%
Fe2O3  2.3,A0.1%
FeO  0.95,A0.1%
CaO  0.96, A0.1%
MgO  1.91, A0.1%
NaO  1.80, A0.1%
TiO2  0.04, A0.01%
K2O  0.78, A0.01%
Caustic Soda  0.55, A0.1%
 
 
 
 
 
 
 
 
Caustic Soda 0.55, A0.1%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
K2O 0.78, A0.01%
K2O 0.78, A0.01%

Notes & Precautions

Advantage

• It helps improve hole cleaning capacities of drilling fluids.
• It is effective as a filtering agent.
• It promotes borehole stability.
• It can be added directly to fresh water or fresh water based drilling fluids.

Generic / Chemical Name

Sodium Montomorillonite

Supply Locations

Bentonite Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Bentonite Powder at a competitive price from us. We have ready stock of Bentonite Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Safety Data (MSDS)


Product Name

Bentonite

Part Number

 RXSOL-81-8101-050

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email 123@rxmarine.com
Website www.rxmarine.com


Component CAS-No Weight %
Bentonite 1302-78-9 100 %

Toxicological Data on Ingredients: Xanthan gum LD50: Not available. LC50: Not available.

Hazard Statements :  Hazardous in case of eye contact (irritant), of inhalation. Slightly hazardous in case of skin contact (irritant), of ingestion.
Potential Chronic Health Effects: : Hazardous in case of inhalation. CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. The substance is toxic to lungs. Repeated or prolonged exposure to the substance can produce target organs damage.


 

Eye Contact : Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. WARM water MUST be used. Get medical attention.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops
Serious Skin Contact: Not Available. 
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention
Serious Inhalation: Not available.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

 

Flammability : Not Flammable
Flash Point : Not Available
Lower Flammable Limit : No Data
Uper mable Limit : No Data
Combustion Products : Not Available
Fire Hazards in Presence of Various Substances : Not available
Explosion Hazards in Presence of Various Substances: : Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media and Instructions: : Not Avialble


Small Spill : Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill : Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.

Handling : Do not breathe dust. Avoid contact with eyes. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible.
Storage : Keep container tightly closed. Keep container in a cool, well-ventilated area.


Engineering Control : Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protective Equipment   Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill : Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product
Exposure Limits :  TWA: 10 from ACGIH (TLV) [United States] Consult local authorities for acceptable exposure limits.

 

       gloves                suit                

             Gloves                       Suit                          

 

Physical State : Solid
Appearance : Pale grey to Bieg
Odor : Not Available
Odor Threshold : No information available.
PH : NA
Boiling Point : Not Available
Melting Point : Decomposes
Critical Temperature: : Not Available
Specific Gravity : 2.5 (Water = 1)
Lower Explosion Limit : No data available.
Vapor Pressure : No data available.
Vapor Density   No data available.
Solubility : Very slightly soluble in cold water, hot water.
Insoluble in methanol, diethyl ether, n-octanol, acetone.
Percent Volatile : NA
Water/Oil Dist. Coeff : NA
Ionicity (in Water) : NA

 

 

Chemical Stability : Stable.
Hazardous Polymerization : Not expected to occur.
Condition to Avoid : NA
Materials Incompatibility : NA
Hazardous Decomposition Products  : Not Available

Routes of Entry    Eye contact. Inhalation.
Toxicity to Animals   LD50: Not available. LC50: Not available
Chronic Effects on Humans    Causes damage to the following organs: lungs.
Other Toxic Effects on Humans    Hazardous in case of inhalation. Slightly hazardous in case of skin contact (irritant), of ingestion.
Special Remarks on Toxicity to Animals   Not available.
Special Remarks on Chronic Effects on Humans   Not Available
Special Remarks on other Toxic Effects on Humans   Not Available


Ecotoxicity : Not Available
Environmental Fate : Not Available
BOD5 and COD : Not Available
Products of Biodegradation : Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation : The products of degradation are as toxic as the original product.
Special Remarks on the Products of Biodegradation :  Not available.


As per local rule & Regulation.


DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
This is not classified as hazardous for any mode of transport.


Federal and State Regulations :  TSCA 8(b) inventory: Bentonite
WHMIS (Canada : CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
Other Regulations : OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
DSCL (EEC :  R36- Irritating to eyes.
HMIS (U.S.A.) : Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.) : Health: 2
Flammability: 0
Reactivity: 0
Protective Equipment : Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.


The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International  has been advised of the possibility of such damages.

top